MATERIAL                 SAFETY                  DATA          SHEET

                                                                                                                                    Page: 1

BRIGHT SEAL WATER BORNE

MANUFACTURER:             SIERRA CORP/TK PRODUCTS                        EMERGENCY PHONE: 1-800-424-9300

ADDRESS     :             11400 WEST 47TH STREET                         INFORMATION PHONE: (952)938-7223

                          MINNETONKA, MN 55343



DATE PRINTED      : 12/13/2006              NAME OF PREPARER : Safety Director

REVISION DATE     : 02/17/06

====================== SECTION 1 - PRODUCT IDENTIFICATION ======================

PRODUCT NAME: BRIGHT SEAL WATER BORNE                       HMIS CODES: H F R P

PRODUCT CODE: TK-BR.SEAL WB                                             200I

============== SECTION 2 - COMPOSITION/INGREDIENT INFORMATION ================

                                                                         WEIGHT            EXPOSURE LIMITS

COMPONENT                                          CAS NUMBER            PERCENT    OSHA PEL    ACGIH TLV      OTHER

------------------------------------------------------------------------------------------------------------------------

+ 2-Butoxyethanol                                      111-76-2               4.7

                                                                                       25 PPM       25 PPM

* Diacetone Alcohol                                    123-42-2            1-10

                                                                                       50 PPM        50 PPM

+*^ Dibutyl Phthalate                                  84-74-2                1.7

                                                                                       5 MG/M3      5 MG./M3

* N,N-Dimethyl Ethanolamine                            108-01-0            1-10

                                                                                       5 PPM       25 PPM



* Chemical(s) that are chronic health hazards. Refer to section 3 for further information.

+ Toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.

^ Hazardous Air Pollutant established by the EPA as directed by the Clean Air Act of 1990.





================== SECTION 3 - HEALTH HAZARDS IDENTIFICATION ===================

PRIMARY ROUTES OF EXPOSURE:

Skin contact.

EFFECTS OF ACUTE EXPOSURE:

EYES: Direct contact with eyes may cause irritation.

SKIN: Prolonged or repeated contact may cause irritation.       2-Butoxyethanol may be absorbed through skin and produce toxi

effects similar to those resulting from inhalation exposure.

INHALATION: Inhalation of vapor or mist can cause irritation of nose, throat and lungs and lead to headaches and

nausea.

INGESTION: Not an anticipated route of exposure.    Small amounts are not expected to be harmful.

CHRONIC HEALTH EFFECTS:

Although some components may indicate chronic exposure effects, no effects are anticipated under normal use conditions

due to the relatively low proportion in the total mixture.

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:

No known effects on other illnesses.



=========================               SECTION 4 - FIRST AID MEASURES ======================

EYES: Flush with large amounts of water for 15 minutes, lifting upper and lower eyelids. If irritation persists seek

medical attention.

SKIN CONTACT: Wash contaminated area with soap and water. Remove and launder contaminated clothing.

INGESTION: If a large amount is ingested, give water or milk and induce vomitting. Seek medical attention.

INHALATION: Remove victim to fresh air and provide oxygen if breathing is difficult. If breathing has stopped

administer artificial respiration. Seek medical attention if condition persists.





================= SECTION 5 - FIRE AND EXPLOSION HAZARD DATA ===================

FLASH POINT: Greater than 200 F                                 METHOD USED: TCC

FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 0.47                                      UPPER: 10.6

EXTINGUISHING MEDIA:

This material will not burn in its liquid state unless heated above its flash point.              Dried films may burn and can be

extinguished by water spray, foam, dry chemical or carbon dioxide.





SPECIAL FIREFIGHTING PROCEDURES:

Persons exposed to products of combustion should wear self-contained breathing apparatus and full protective equipment.

Isolate danger area, keep unauthorized personnel out.





UNUSUAL FIRE AND EXPLOSION HAZARDS:

There is the possibility of pressure buildup in closed containers when heated.            Water spray may be used to cool these

containers.

                                 MATERIAL                    SAFETY             DATA       SHEET

                                                                                                                                 Page: 2

BRIGHT SEAL WATER BORNE



================== SECTION 6 - ACCIDENTAL RELEASE MEASURES ====================

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:

Do not let spilled or leaking material enter watercourse. May be toxic to aquatic life. Absorb with oil-dri or similar

inert material. Sweep or scrape up and containerize. Rinse affected area thoroughly with water. Wear appropriate

protective equipment.





==================== SECTION 7 - HANDLING AND STORAGE ==========================

HANDLING INFORMATION:

Employees who come in contact with this material must be trained in accordance to 1910.1200 of the Hazard Communicatin

Standard. Wear chemical resistant gloves and protective clothing to minimize contact. The use of respiratory

protection is advised when spraying because of mist and dust overspray.

STORAGE INFORMATION:

Keep from freezing; material may coagulate. The minimum recommended storage temperature is 34F/1C, the maximum

recommended storage temperature is 120F/49C. Keep away from incompatable materials (see section 10). Keep containers

tightly closed. It is advised that material be used within 1 year of manufacture, rotate stock.

OTHER PRECAUTIONS:

All empty containers should be disposed of in an evironmentally safe manner in accordance with all governmental

regulations.





================ SECTION 8 - CONTROL MEASURES/PERSONAL PROTECTION ==============

RESPIRATORY PROTECTION:

No special requirements under normal use conditions. In confined areas, or ares with poor ventilation, engineering

controls should be used to minimize exposure. Use NIOSH/MSHA approved respirator if conditions warrant.

VENTILATION:

General room ventilation is adequate.

PROTECTIVE GLOVES:

Prevent prolonged or repeated contact by wearing chemical resistant gloves and other appropriate protective clothing.

Launder contaminated clothing before reuse.

EYE PROTECTION:

Wear safety glasses to reduce eye contact potential. Chemical safety goggles (ANSI Z87.1 or approved equivalent) are

appropriate if splashing is likely. Eye washes must be available where eye contact can occur.

OTHER PROTECTIVE CLOTHING OR EQUIPMENT:

A source of clean water should be available for flushing eyes and skin.         Showers should be available if larger spills

are possible.

WORK/HYGIENIC PRACTICES:

Efforts should be made to minimize contact and spills.       Always wash hands before eating, drinking, or smoking.       Clean up

spills promptly. Follow OSHA and company guidlines.





==================== SECTION 9 - PHYSICAL/CHEMICAL PROPERTIES ==================

PHYSICAL STATE: Liquid                                  COLOR: Various colors

ODOR: Amine or ammonia odor                             SOLUBILITY IN WATER: Dilutable

SPECIFIC GRAVITY (H2O=1): 1.02                          VAPOR DENSITY: Heavier than air.

BOILING RANGE:                                          EVAPORATION RATE: Slower than nBuAcCOATING V.O.C.: 390 g/l(3.26

======================= SECTION 10 - STABILITY/REACTIVITY DATA =================

STABILITY:

Stable under normal conditions and handling.

CONDITIONS TO AVOID:

None known

INCOMPATIBILITY (MATERIALS TO AVOID):

None known.    Materials which are not compatable with water or ordinary organics will not be compatable with this

material.





HAZARDOUS DECOMPOSITION OR BYPRODUCTS:

Combustion may liberate toxic byproducts such as carbon dioxide, and carbon monoxide, various oxides of carbon and

nitrogen. Thermal decomposition may liberate acrylic monomers and ammonia.





HAZARDOUS POLYMERIZATION:

Will not occur.



======================= SECTION 11 - TOXICOLOGICAL INFORMATION =================

SENSITIZATION:

None known.

CARCINOGENICITY:

                                   MATERIAL            SAFETY             DATA        SHEET

                                                                                                                          Page: 3

BRIGHT SEAL WATER BORNE

There is no data available to indicate any components present at greater than 0.1% may present a carcinogenic hazard.

REPRODUCTIVE TOXICITY:

There is no data available to indicate any components present at greater than 0.1% may present reproductive toxicity.

TERATOGENICITY (BIRTH DEFECTS):

There is no data available to indicate any components present at greater than 0.1% may cause birth defects.

MUTAGENICITY:

Yes.   2-Butoxyethanol may cause blood disorders based on animal data.



======================== SECTION 12 - ECOLOGICAL INFORMATION ===================

ENVIRONMENTAL DATA:

Contains ammonia or amines which may be toxic to aquatic life.    Dibutyl Phthalate is a marine pollutant.



======================== SECTION 13 - DISPOSAL CONSIDERATIONS ==================

This product does not meet the definition of hazardous waste under the U.S. EPA Hazardous Waste Regulations 40 CFR 261,

however, state and local regulations may be more restrictive. Coagulate the emulsion by the stepwise addition of ferric

chloride and lime. Remove the clear supernatant and flush to a chemical sewer. Incinerate liquid and contaminated

solids in accordance with local, state, and federal regulations.





======================== SECTION 14 - REGULATORY                         INFORMATION ===============

SHIPPING NAME:

Not regulated.



All ingredients of this product are listed, or are excluded from listing, on the US Toxic Subatances Control Act (TSCA)

chemical substance inventory.



This product does contain a chemical(s) subject to the reporting requirements of SARA Title III, Section 313 (40CFR

372). See section 2.





STATE SPECIFIC REQUIREMENTS:

This product does not contain a chemical known to the state of California to cause cancer, birth defects or reproductive

harm, subject to the requirements of California Proposition 65.





STATE LISTED COMPONENTS        CAS NUMBER       STATE CODE    .

2-Butoxyethanol                   111-20-7       CA,FL,IL,MA,ME,MN,NJ,PA,RI

Dibutyl Phthalate                  84-74-2       NJ, MA, PA

Diacetone Alcohol                 123-42-2       CA,FL,IL,MA,ME,MN,NJ,PA,RI





================================= DISCLAIMER ===================================

The information contained within this MSDS was obtained from sources which Sierra/TK Products believe are reliable.

However, the information is provided without any representation or warranty, expressed or implied, regarding it's

accuracy or correctness. We do not assume responsibility for loss, damage or expense arising from storage, use, or

disposal of this product.



CONDITIONS OF SALE/LIMITED WARRANTY: Sierra/TK Products, warrants that this product conforms to the label descriptions,

is free from manufacturing defects, and is fit for the ordinary purposes for which such goods are used. Inasmuch as the

use of this product by others and other factors affecting product performance are beyond Sierra/TK Products' control,

Sierra/TK Products does not guarantee the results to be obtained. There are no warranties except as stated herein,

either express or implied, including implied warranties of merchantability or fitness for a particular pupose. Should

this product fail to give satisfactory results, Sierra/TK Products will replace the product or, at its option, refund

the purchase price. This is the sole and exclusive remedy for any failure of this product to perform as warranted and

shall also constitute liquidated damages in case of loss. Under no curcumstances shall the buyer be entitled to any

other remedy or damages. Remedies for incidental and consequential damages are specifically excluded. Sierra/TK

Products does not authorize any person to assume for it any other liability in connection with the sale or use of this

product unless specifically authorized by Sierra/TK Products in writing.