MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
PRODUCT IDENTIFICATION NUMBER (PIN):
PRODUCT IDENTIFIER
Lipoic Acid LI100X
PRODUCT USE
MANUFACTURERS NAME: SUPPLIERS NAME:
Xenex Labs XENEX LABORATORIES INC.
STREET ADDRESS: STREET ADDRESS:
2402 CANOE AVENUE
CITY: PROVINCE: CITY: PROVINCE:
COQUITLAM B.C.
POSTAL CODE: EMERGENCY TELEPHONE NO: POSTAL CODE: EMERGENCY TELEPHONE NO:
SPE100 V3K 6C2 (CHEMTREC) 1-800-424-9300
SECTION 2 - HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS
% CAS NUMBER LD50 / LC50 OF INGREDIENT
/ CHEMICAL FORMULA
(SPECIFY SPECIES) (SPECIFY ROUTE AND DOSE)
Lipoic Acid 100 1077-28-7 Not Available Not Available
C8H14O2S2
SECTION 3 - PHYSICAL DATA
PHYSICAL STATE AND APPEARANCE ODOR TASTE ODOR THRESHOLD (ppm)
Solid (Powdered Solid) Yellow Not Available Not Available Not Available
MELTING POINT (C) BOILING POINT (C) VOLATILITY VAPOR PRESSURE VAPOR DENSITY
60掳C (140掳F) 162掳C (323.6掳F) Not Available Not Available Not Available
pH SPECIFIC GRAVITY COEFF. WATER/OIL DIST. DISPERSION PROPERTIES / SOLUBILITY
Not Available Not Available Not Available Not Available
SECTION 4 - FIRE AND EXPLOSION DATA
NO YES
FLAMMABILITY IF YES, UNDER WHAT CONDITIONS?
May be combustible at high temperature
MEANS OF EXTINCTION
SMALL: Use DRY chemical powder.
LARGE: Use water spray, fog or foam. Do NOT use water jet.
FLASHPOINT (C) AND METHOD FLAMMABLE LIMITS (% BY VOLUME) CRITICAL TEMPERATURE
Not Available UPPER: Not Available LOWER: Not Available Not Available
AUTOIGNITION TEMPERATURE (C) HAZARDOUS COMBUSTION PRODUCTS
Not Available (CO,CO2,SO2,SO3...) Oxides of carbon and sulfur. Acrid smoke and fume
SECTION 5 - REACTIVITY DATA
YES NO IF NO, UNDER WHICH CONDITIONS?
CHEMICAL STABILITY
The product is stable
NO YES
INCOMPATIBILITY WITH OTHER SUBSTANCES IF SO, WHICH ONES?
Not Available
REACTIVITY, AND UNDER WHAT CONDITIONS
Not Available
HAZARDOUS DECOMPOSITION PRODUCTS
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
The products of degradation are more toxic
MATERIAL SAFETY DATA SHEET
LI100X
PRODUCT IDENTIFIER
Lipoic Acid
SECTION 6 - TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY
INGESTION
INHALATION
SKIN CONTACT SKIN ABSORPTION EYE CONTACT
EFFECTS OF ACUTE EXPOSURE TO PRODUCT
Extremely hazardous in case of skin contact (irritant, permeator), of eye contact (irritant), of ingestion, of inhalation.
Inflammation of the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching,
scaling, reddening, or, occasionally, blistering.
EFFECTS OF CHRONIC EXPOSURE TO PRODUCT
The substance is toxic to lungs, mucous membranes. Repeated or prolonged exposure to the substance can produce
target organs damage. Repeated or prolonged inhalation of dust may lead to chronic respiratory irritation.
EXPOSURE LIMITS IRRITANCY OF PRODUCT SENSITIZATION OF PRODUCT CARCINOGENICITY
Not Available Yes Not Available Not Available
REPRODUCTIVE TOXICITY MUTAGENICITY SYNERGISTIC PRODUCTS
TERATOGENICITY
Not Available Not Available Not Available Not Available
SECTION 7 - PREVENTATIVE MEASURE
PERSONAL PROTECTIVE EQUIPMENT
GLOVES (SPECIFY) RESPIRATOR (SPECIFY) EYE (SPECIFY)
Yes ( impervious ) Approved / Certified respirator Safety goggles, face shield
FOOTWEAR (SPECIFY) CLOTHING (SPECIFY) OTHER (SPECIFY)
No Coveralls / Lab coat Eyewash equipment nearby
ENGINEERING CONTROLS (SPECIFY eg. VENTILATION, ENCLOSED PROCESS)
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
LEAK AND SPILL PROCEDURE
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading
water on the contaminated surface.
WASTE DISPOSAL
According to local, provincial, and federal regulations.
HANDLING PROCEDURES AND EQUIPMENT
Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue
under a fume hood. Ground all equipment containing material. Do not breathe dust. In case of insufficient ventilation,
wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible. Avoid
contact with skin and eyes
STORAGE REQUIREMENTS
Keep container tightly closed. Keep container in a cool, dry, well-ventilated area. Container may be hazardous when
empty since they retain product residues (Dust, Solids) observe all warnings and precautions listed for the product
Ground all equipment containing material. Combustible materials should be stored away from extreme heat and away
from strong oxidizing agents.
SPECIAL SHIPPING INFORMATION
CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
SECTION 8 - FIRST AID MEASURES
SPECIFIC MEASURES
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the
SKIN
contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds,
crevices, creases and groin. Cover the irritated skin with an emollient. If irritation persists, seek
medical attention. Wash contaminated clothing before reusing.
Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention.
EYES
If inhaled remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give
INHALATION
oxygen. Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
INGESTION Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is
not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
IF IRRITATION PERSISTS AND IN ALL OTHER CASES, GET IMMEDIATE MEDICAL ATTENTION.
MATERIAL SAFETY DATA SHEET
LI100X
PRODUCT IDENTIFIER
Lipoic Acid
SECTION 9 - PREPARATION DATE OF M.S.D.S.
All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packa
If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the us
responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical
data judged to be reliable, Xenex Laboratories Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.
PREPARED BY (GROUP, DEPARTMENT, ETC.) PHONE NUMBER DATE:
CONTROL DEPARTMENT (604) 552 3031 November 30 2006
|