Aervoe Engine Enamel - Aerosol
Material Safety Data Sheet
SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS
BOILING POINT: N / AP SPECIFIC GRAVITY (H20=1): 0.7 to 0.8
VAPOR DENSITY: Heavier than air SOLUBILITY IN WATER: Negligible
EVAPORATION RATE: Faster than n-Butyl Acetate APPEARANCE AND ODOR: Clear or opaque liquid with ketone odor
The information presented in these forms is believed to be correct and sufficient to meet the requirements of OSHA Hazard Communication
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
standard (29 CFR 1910.1200) concerning worker's right to know.
FLASH POINT: < 0掳 F (-18掳 C) METHOD USED: Estimated FLAMMABLE LIMITS - LEL: 0.7% UEL: 15.0%
The following material safety data sheet covers the hazardous ingredients associated with more than one color aerosol paint. As per 29
EXTINGUISHING MEDIA: Carbon dioxide, dry chemical, water spray.
CFR 1900. 1200 paragraph (g); whenever the hazards associated with similar mixtures are the same, then one MSDS may be prepared
SPECIAL FIRE FIGHTING PROCEDURES: Use water spray to cool containers exposed to heat or fire to prevent pressure build up.
to cover several products. Self-contained breathing apparatus should be used if product is involved in fire.
This MSDS covers the following Aervoe aerosol products. UNUSUAL FIRE AND EXPLOSION HAZARDS: Treat as cylinders of compressed gas. Closed containers may rupture due to
pressure build up from extreme temperature.
FLAMMABILITY: Yes - Flammable aerosol under conditions of sparks, flame, or hot surfaces.
ENGINE ENAMEL SENSITIVITY TO IMPACT: Do not puncture SENSITIVITY TO STATIC DISCHARGE: Primarily vapors
SECTION V - REACTIVITY DATA
510 Universal Clear 520 Chevrolet Orange 560 Ford Blue 570 Universal Silver
STABILITY: Stable CONDITIONS TO AVOID: Open flames, sparks, electrical arcs.
511 Universal White 530 Cadillac Gold 561 Chevrolet Blue 575 Dull Aluminum
INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizing agents.
512 Flat Black 540 Alpine Green 562 G.M. Blue 580 Cummins Beige
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Carbon Monoxide, Carbon Dioxide.
513 Satin Black 550 Ford Red 566 Ford-Merc. Blue 582 Cast Iron Gray
HAZARDOUS POLYMERIZATION: Will not occur
514 Gloss Black 551 Ford Gray 568 Chrysler Blue 583 Steel Blast Gray
SECTION VI - HEALTH HAZARD DATA
SECTION I - MANUFACTURER IDENTIFICATION
INHALATION: Respiratory tract irritant. May cause dizziness, light-headedness and / or headaches.
MANUFACTURER鈥橲 NAME: Aervoe Industries Inc. ADDRESS: 1198 Mark Circle, Gardnerville, NV 89410 SKIN CONTACT: Prolonged or repeated contact may cause irritation and dermatitis.
INFORMATION PHONE: 775-782-0100 EMERGENCY PHONE: 1-800-424-9300 EYE CONTACT: Painful with slight to moderate irritation.
DATE REVISED: 06-10-03 REASON REVISED: Updated SKIN ABSORPTION: Not likely to be absorbed in toxic amounts under normal use.
INGESTION: Not likely in normal use but swallowing large amounts may be harmful.
CARCINOGENICITY: The ingredients are not listed as a human carcinogen by IARC, ACGIH, NTP, or OSHA.
TERATOGENICITY: Not established MUTAGENICITY: Not established
MEDICAL CONDITION GENERALLY AGGRAVATED BY EXPOSURE: Not established
EMERGENCY AND FIRST AID PROCEDURES: INHALATION - Remove from exposure, seek medical attention if signs/symptoms persist.
SECTION II - HAZARDOUS INGREDIENTS / SARA III INFORMATION SKIN - Wash affected area with soap and water, remove contaminated clothing, seek medical attention if irritation persists.
OCCUPATIONAL EXPOSURE LIMITS EYES - Flush immediately with water for 15 minutes, seek medical attention if irritation persists.
INGESTION - Do NOT induce vomiting, drink plenty of water, seek medical attention.
HAZARDOUS WEIGHT OSHA ACGIH ACGIH LD50 SPECIES LC50 SPECIES
COMPONENTS PERCENT PEL TLV STEL & ROUTE & ROUTE
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Acetone 1000 ppm 500 ppm 5800 mg / kg (Rat-Oral) 21000 ppm / 8 hr (Rat-Inha) STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Ventilate area. Prevent from entering a
(CAS 67-64-1) 15 - 40 watercourse. Use an inert absorbent material and non-sparking type tools.
Hydrocarbon Propellant 1000 ppm 1000 ppm N / AV N / AV WASTE DISPOSAL METHOD: Dispose of in accordance with local, state and federal regulations. Do not incinerate closed containers.
(CAS 68476-86-8) 15 - 40 PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Do not store above 120掳 F (49掳 C). Do not store or use near heat, sparks or flame.
*Xylene 100 ppm 100 ppm 4300 mg / kg (Rat-Oral) 6700 ppm / 4 hr (Rat-Inha) OTHER PRECAUTIONS: Do not smoke while using this product. Dust from sanding the dry paint film should be treated as a nuisance dust with a
(CAS 1330-20-7) 10 - 30 TLV of 15 mg / cubic meter.
Methyl Propyl Ketone 200 ppm 200 ppm 250 ppm N / AV N / AV SECTION VIII - CONTROL MEASURES
(CAS 107 87 9) 1-5 RESPIRATORY PROTECTION: In areas with poor ventilation, use a NIOSH approved Organic Vapor Cartridge Respirator.
*n-Butanol 100 ppm 20 ppm 2500 mg / kg (Rat-Oral) 8000 ppm / 4 hr (Rat-Inha) For concentrations above the TLV (as defined in Section II), use a positive air supplied respirator.
(CAS 71-36-3) 0.5 - 2.0 VENTILATION: General ventilation to maintain exposure limits below TLV鈥檚 as defined in Section II.
n-Butyl Acetate 150 ppm 150 ppm 200 ppm N / AV N / AV PROTECTIVE GLOVES: Chemical resistant gloves such as Neoprene or Nitrile rubber.
(CAS 123-86-4) 0.5 - 2.0 EYE PROTECTION: Safety glasses or goggles.
Aliphatic Hydrocarbon 500 ppm 100 ppm N / AV N / AV OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Not established.
(CAS 8052-41-3) 0.5 - 2.0 WORK / HYGIENIC PRACTICES: Avoid prolonged or repeated contact. Do not breathe vapors. Wash contaminated clothing prior to reuse.
SECTION IX - DISCLAIMER
*Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
THE INFORMATION CONTAINED HEREIN IS BELIEVED TO BE ACCURATE BUT IS NOT WARRANTED TO BE SO. NOTHING CONTAINED
13A
NOTE: N / AP = Not Applicable N / AV = Not Available HEREIN CONSTITUTES A SPECIFICATION NOR IS IT INTENDED TO WARRANT SUITABILITY FOR THE INTENDED USE.
Aervoe Engine Enamel - Bulk
Material Safety Data Sheet
SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS
BOILING POINT: 133掳 F (56掳 C) SPECIFIC GRAVITY (H20=1): 0.9 to 1.1
VAPOR DENSITY: Heavier than air SOLUBILITY IN WATER: Negligible
EVAPORATION RATE: Faster than n-Butyl Acetate APPEARANCE AND ODOR: Clear or opaque liquid with ketone odor
The information presented in these forms is believed to be correct and sufficient to meet the requirements of OSHA Hazard Communication
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
standard (29 CFR 1910.1200) concerning worker's right to know.
FLASH POINT: 35掳 F (-2掳 C) METHOD USED: PMCC FLAMMABLE LIMITS - LEL: 0.7% UEL: 15.0%
The following material safety data sheet covers the hazardous ingredients associated with more than one color bulk paint. As per 29 CFR EXTINGUISHING MEDIA: Carbon dioxide, dry chemical, water spray.
1900. 1200 paragraph (g); whenever the hazards associated with similar mixtures are the same, then one MSDS may be prepared to cover SPECIAL FIRE FIGHTING PROCEDURES: Use water spray to cool containers exposed to heat or fire to prevent pressure build up.
several products. Self-contained breathing apparatus should be used if product is involved in fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may rupture due to pressure build up from extreme temperature.
Product Name: Bulk Engine Enamel
FLAMMABILITY: Yes - Flammable liquid under conditions of sparks, flame, or hot surfaces.
SENSITIVITY TO IMPACT: Do not puncture SENSITIVITY TO STATIC DISCHARGE: Primarily vapors
SECTION I - MANUFACTURER IDENTIFICATION
MANUFACTURER鈥橲 NAME: Aervoe Industries Inc. ADDRESS: 1198 Mark Circle, Gardnerville, NV 89410 SECTION V - REACTIVITY DATA
INFORMATION PHONE: 775-782-0100 EMERGENCY PHONE: 1-800-424-9300 STABILITY: Stable CONDITIONS TO AVOID: Open flames, sparks, electrical arcs.
DATE REVISED: 06-11-03 REASON REVISED: Updated INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizing agents.
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: Carbon Monoxide, Carbon Dioxide.
HAZARDOUS POLYMERIZATION: Will not occur
SECTION II - HAZARDOUS INGREDIENTS / SARA III INFORMATION
510 Universal Clear 562 G.M. Blue 580 Cummins Beige
513 Satin Black 568 Chrysler Blue 582 Cast Iron Gray SECTION VI - HEALTH HAZARD DATA
530 Cadillac Gold 575 Dull Aluminum 583 Steel Blast Gray INHALATION: Respiratory tract irritant. May cause dizziness, light-headedness and / or headaches.
561 Chevrolet Blue SKIN CONTACT: Prolonged or repeated contact may cause irritation and dermatitis.
EYE CONTACT: Painful with slight to moderate irritation.
OCCUPATIONAL EXPOSURE LIMITS
SKIN ABSORPTION: Not likely to be absorbed in toxic amounts under normal use.
HAZARDOUS WEIGHT OSHA ACGIH ACGIH LD50 SPECIES LC50 SPECIES
INGESTION: Not likely in normal use but swallowing large amounts may be harmful.
COMPONENTS PERCENT PEL TLV STEL & ROUTE & ROUTE
CARCINOGENICITY: The ingredients are not listed as a human carcinogen by IARC, ACGIH, NTP, or OSHA.
TERATOGENICITY: Not established MUTAGENICITY: Not established
*Xylene 100 ppm 100 ppm 4300 mg / kg (Rat-Oral) 6700 ppm / 4 hr (Rat-Inha)
MEDICAL CONDITION GENERALLY AGGRAVATED BY EXPOSURE: Not established
(CAS 1330-20-7) 20 - 50
EMERGENCY AND FIRST AID PROCEDURES: INHALATION - Remove from exposure, seek medical attention if signs/symptoms persist.
Methyl Propyl Ketone 200 ppm 200 ppm 250 ppm N / AV N / AV
SKIN - Wash affected area with soap and water, remove contaminated clothing, seek medical attention if irritation persists.
(CAS 107 87 9) 3-8
EYES - Flush immediately with water for 15 minutes, seek medical attention if irritation persists.
*n-Butanol 100 ppm 20 ppm 2500 mg / kg (Rat-Oral) 8000 ppm / 4 hr (Rat-Inha)
INGESTION - Do NOT induce vomiting, drink plenty of water, seek medical attention.
(CAS 71-36-3) 1-5
n-Butyl Acetate 150 ppm 150 ppm 200 ppm N / AV N / AV
(CAS 123-86-4) 1-5
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Aliphatic Hydrocarbon 500 ppm 100 ppm N / AV N / AV
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Ventilate area. Prevent from entering a
(CAS 8052-41-3) 0.5 - 5.0
watercourse. Use an inert absorbent material and non-sparking type tools.
WASTE DISPOSAL METHOD: Dispose of in accordance with local, state and federal regulations. Do not incinerate closed containers.
The colors listed below contain Acetone in addition to the hazardous ingredients listed above.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Do not store above 120掳 F (49掳 C). Do not store or use near heat, sparks or flame.
OTHER PRECAUTIONS: Do not smoke while using this product. Dust from sanding the dry paint film should be treated as a nuisance dust with a
560 Ford Blue
511 Universal White 540 Alpine Green
TLV of 15 mg / cubic meter.
566 Ford-Merc. Blue
512 Flat Black 550 Ford Red
SECTION VIII - CONTROL MEASURES
570 Universal Silver
514 Gloss Black 551 Ford Gray RESPIRATORY PROTECTION: In areas with poor ventilation, use a NIOSH approved Organic Vapor Cartridge Respirator.
520 Chevrolet Orange For concentrations above the TLV (as defined in Section II), use a positive air supplied respirator.
VENTILATION: General ventilation to maintain exposure limits below TLV鈥檚 as defined in Section II.
Acetone 1000 ppm 500 ppm 5800 mg / kg (Rat-Oral) 21000 ppm / 8 hr (Rat-Inha)
PROTECTIVE GLOVES: Chemical resistant gloves such as Neoprene or Nitrile rubber.
(CAS 67-64-1) 2 - 16
EYE PROTECTION: Safety glasses or goggles.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Not established.
WORK / HYGIENIC PRACTICES: Avoid prolonged or repeated contact. Do not breathe vapors. Wash contaminated clothing prior to reuse.
SECTION IX - DISCLAIMER
THE INFORMATION CONTAINED HEREIN IS BELIEVED TO BE ACCURATE BUT IS NOT WARRANTED TO BE SO. NOTHING CONTAINED
*Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
HEREIN CONSTITUTES A SPECIFICATION NOR IS IT INTENDED TO WARRANT SUITABILITY FOR THE INTENDED USE.
13B
NOTE: N / AP = Not Applicable N / AV = Not Available
|