zenox
zeno TM
LUBRICANTS
ABN: 97 106 933 582
Unit 2/ 10 Success Way Wangara, WA 6065 Phone/ Fax +61 8 9403 5119; Mob: 0421 840 351
PO Box 968 Hillarys WA 6923 Email: info@zenox.com.au; Website: www.zenox.com.au
AIR-CON ANTI BACTERIAL DISINFECTANT & DEODORISER
PRODUCT NAME
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Supplier Name ZENOX INDUSTRIES GLOBAL PTY LTD
Address PO Box 968, Hillarys, WA, AUSTRALIA, 6923
Telephone (08) 9403 5119
Fax (08) 9403 5119
Emergency 0421 840 351
Email info@zenox.com.au
Web Site http://www.zenox.com.au
Synonym(s) Z093 - PART NUMBER 鈥? ZENOX AIR-CON ANTI BACTERIAL DISINFECTANT & DEODORISER
Use(s) DEODORISER 鈥? DISINFECTANT
2. HAZARDS IDENTIFICATION
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO NOHSC CRITERIA
CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE
UN No. 1950 Hazchem Code Pkg Group
2Y None Allocated
DG Class 2.1 Subsidiary Risk(s) EPG 2D1
None Allocated
3. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient Formula Conc. CAS No.
ETHANOL C2-H6-O 20-40% 64-17-5
PROPYL ALCOHOL C3-H8-O 20-40% 71-23-8
WATER H2O 20-30% 7732-18-5
PROPYLENE GLYCOL Not Available <10% 4254-15-3
BENZALKONIUM CHLORIDE Not Available <1% 8001-54-5
VANILLIN C8-H8-O3 <1% 121-33-5
4. FIRST AID MEASURES
Eye Hold eyelids apart and flush continuously with water. Continue until advised to stop by the Poisons Information
Centre, a doctor, or for at least 15 minutes. Keep patient calm.
Inhalation Leave area of exposure. If symptoms develop, seek urgent medical attention. If assisting a person exposed, wear
a Type A (Organic vapour) respirator (or Air-line respirator in poorly ventilated areas). If person is not breathing,
apply artificial respiration and seek urgent medical attention.
Skin Gently flush affected areas with water.
Ingestion For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor. If swallowed, do not
induce vomiting. Ingestion is considered unlikely due to product form.
Advice to Treat symptomatically
Doctor
Page 1 of 5
RMT
Reviewed: 15 May 2006
Printed: 05 Jan 2007
AIR-CON ANTI BACTERIAL DISINFECTANT & DEODORISER
PRODUCT NAME
5. FIRE FIGHTING MEASURES
Flammability Combustible liquid - highly flammable propellant. May evolve toxic gases (carbon oxides, hydrocarbons) when
heated to decomposition. Aerosol container may explode if heated above 50 C. Eliminate all ignition sources
including cigarettes, open flames, spark producing switches/tools, heaters, naked lights, pilot lights etc. when
handling.
Fire and Combustible liquid - highly flammable propellant/vapour. Evacuate area and contact emergency services. Toxic
gases (hydrocarbons, carbon oxides) may be evolved. Remain upwind and notify those downwind of hazard. Wear
Explosion
full protective equipment (see spill above) including Self Contained Breathing Apparatus (SCBA) when combating
fire. Use waterfog to cool intact containers and nearby storage areas.
Extinguishing Dry agent, carbon dioxide, foam or water fog. Prevent contamination of drains or waterways, absorb runoff with
sand or similar.
Hazchem Code 2Y
6. ACCIDENTAL RELEASE MEASURES
Spillage If can is punctured, clear area of all unprotected personnel and ventilate area. Wear splash-proof goggles,
PVC/rubber gloves, a Type A-Class P1 (Organic vapour and Particulate) respirator (where an inhalation risk
exists) and coveralls. Collect and allow to discharge outdoors. Absorb residues with sand or similar and place in
clean containers for disposal.
7. STORAGE AND HANDLING
Storage Store out of direct sunlight and out of the reach of children, in a cool, dry, well ventilated area, removed from
oxidising agents (eg. hypochlorites), acids (sulphuric acid), heat sources and foodstuffs. Ensure containers are
adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should
have appropriate ventilation systems.
Handling Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin
contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating,
drinking and smoking in contaminated areas.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Ventilation Do not inhale vapours. Use in well ventilated areas. In poorly ventilated areas, mechanical explosion proof
extraction ventilation is recommended. Flammable/ explosive vapours may accumulate in poorly ventilated areas.
Vapours are heavier than air and may travel some distance to an ignition source and flash back. Maintain vapour
levels below the recommended exposure standard.
Exposure ETHANOL (64-17-5)
ES-TWA: 1000 ppm (1880 mg/m3)
Standards
WES-TWA: 1000 ppm (1880 mg/m3)
PROPYL ALCOHOL (71-23-8)
ES-STEL : 250 ppm (614 mg/m3)
ES-TWA: 200 ppm (492 mg/m3) SKIN
WES-TWA: 200 ppm (492 mg/m3)
PPE Wear safety glasses and splash-proof goggles. When using large quantities or where heavy contamination is
likely, wear coveralls and rubber or PVC gloves. At high vapour levels, wear a Type A-Class P1 (Organic
gases/vapours and Particulate) Respirator.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance LIQUID (AEROSOL DISPENSED) Solubility (water) SOLUBLE
Odour CHARACTERISTIC ODOUR Specific Gravity NOT AVAILABLE
Page 2 of 5
RMT
Reviewed: 15 May 2006
Printed: 05 Jan 2007
AIR-CON ANTI BACTERIAL DISINFECTANT & DEODORISER
PRODUCT NAME
pH NOT AVAILABLE % Volatiles NOT AVAILABLE
Vapour Pressure NOT AVAILABLE Flammability HIGHLY FLAMMABLE PROPELLANT
Vapour Density NOT AVAILABLE Flash Point NOT AVAILABLE
Melting Point NOT AVAILABLE Upper Explosion Limit NOT AVAILABLE
Boiling Point NOT AVAILABLE Lower Explosion Limit NOT AVAILABLE
Evaporation Rate NOT AVAILABLE Autoignition Temperature NOT AVAILABLE
10. STABILITY AND REACTIVITY
Incompatible with oxidising agents (eg. hypochlorites, peroxides), acids (eg. sulphuric acid), heat and ignition
Reactivity
sources.
Decomposition May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition.
Products
11. TOXICOLOGICAL INFORMATION
Health Hazard Low to moderate toxicity - irritant. This product may only have the potential to cause adverse health effects if
Summary intentionally misused (eg. deliberately inhaling contents). Over exposure may result in adverse effects to the
central nervous system. Use safe work practices to avoid eye or skin contact and vapour inhalation.
Eye Irritant. Exposure may result in lacrimation, irritation, pain and redness.
Irritant. Inhalation may cause irritation to the respiratory system, nose and throat irritation, coughing, and
Inhalation
headache. Over exposure may result in nausea, dizziness and drowsiness.
Skin Irritant. Prolonged contact may result in drying and defatting of the skin, rash and dermatitis.
Low to moderate toxicity. Ingestion may result in nausea, vomiting, abdominal pain and drowsiness with large
Ingestion
doses. Aspiration may result in chemical pneumonitis and pulmonary oedema. Ingestion is considered unlikely
due to product form (ie. aerosol).
ETHANOL (64-17-5)
Toxicity Data
LC50 (Inhalation): 2000 ppm/10 hours (rat)
LD50 (Ingestion): 3450 mg/kg (mouse)
PROPYL ALCOHOL (71-23-8)
LC50 (Inhalation): 48 g/m3 (mouse)
LD50 (Ingestion): 1870 mg/kg (rat)
LD50 (Skin): 4060 mg/kg (rabbit)
BENZALKONIUM CHLORIDE (8001-54-5)
LD50 (Ingestion): 240 mg/kg (rat)
VANILLIN (121-33-5)
LD50 (Ingestion): 1400 mg/kg (guinea pig)
12. ECOLOGICAL INFORMATION
Environment Aliphatic hydrocarbons behave differently in the environment depending on their size. WATER: Light aliphatics
volatilise rapidly from water (half life - few hours). Bioconcentration should not be significant. SOIL: Light aliphatics
biodegrade quickly in soil and water, heavy aliphatics biodegrade very slowly. ATMOSPHERE: Vapour-phase
aliphatics will degrade by reaction with hydroxyl radicals.
13. DISPOSAL CONSIDERATIONS
Waste Disposal For small amounts absorb contents with sand or similar and dispose of to an approved landfill site. Do not puncture
or incinerate aerosol cans. Contact the manufacturer for additional information.
Legislation Dispose of in accordance with relevant local legislation.
14. TRANSPORT INFORMATION
CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE
Page 3 of 5
RMT
Reviewed: 15 May 2006
Printed: 05 Jan 2007
AIR-CON ANTI BACTERIAL DISINFECTANT & DEODORISER
PRODUCT NAME
Shipping Name AEROSOLS
UN No. 1950 DG Class 2.1 Subsidiary Risk(s) None Allocated
Pkg Group None Allocated Hazchem Code 2Y EPG 2D1
IATA
Shipping Name AEROSOLS
UN No. 1950 DG Class 2.1 Subsidiary Risk(s) None Allocated
Pkg Group None Allocated
IMDG
Shipping Name AEROSOLS
UN No. 1950 DG Class 2.1 Subsidiary Risk(s) None Allocated
Pkg Group None Allocated
15. REGULATORY INFORMATION
Poison A poison schedule number has not been allocated to this product using the criteria in the Standard for the
Schedule Uniform Scheduling of Drugs and Poisons (SUSDP).
AICS All chemicals listed on the Australian Inventory of Chemical Substances (AICS).
16. OTHER INFORMATION
Additional AEROSOL CANS may explode at temperatures approaching 50 C.
Information
SYNERGISM - ANTAGONISM: Ingredients in this product may act together to aggravate or reduce adverse
effects. Accordingly the time weighted average concentration (TWA) provided for single ingredients should be
considered as a guide only and all due care exercised when handling.
RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid
exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken.
Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air
powered or air supplied respirators should be considered where prolonged or repeated use is necessary.
ABBREVIATIONS:
mg/m3 - Milligrams per cubic metre
ppm - Parts Per Million
TWA/ES - Time Weighted Average or Exposure Standard.
CNS - Central Nervous System
NOS - Not Otherwise Specified
pH - relates to hydrogen ion concentration - this value will relate to a scale of 0 - 14, where 0 is highly acidic and
14 is highly alkaline.
CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds.
M - moles per litre, a unit of concentration.
IARC - International Agency for Research on Cancer.
PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:
The recommendation for protective equipment contained within this Chem Alert report is provided as a guide
only. Factors such as method of application, working environment, quantity used, product concentration and the
availability of engineering controls should be considered before final selection of personal protective equipment is
made.
HEALTH EFFECTS FROM EXPOSURE:
It should be noted that the effects from exposure to this product will depend on several factors including:
frequency and duration of use; quantity used; effectiveness of control measures; protective equipment used and
method of application. Given that it is impractical to prepare a Chem Alert report which would encompass all
possible scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.
COLOUR RATING SYSTEM: RMT has assigned all Chem Alert reports a colour rating of Green, Amber or Red
for the sole purpose of providing users with a quick and easy means of determining the hazardous nature of a
product. Safe handling recommendations are provided in all Chem Alert reports so as to clearly identify how
users can control the hazards and thereby reduce the risk (or likelihood) of adverse effects. As a general
guideline, a Green colour rating indicates a low hazard, an Amber colour rating indicates a moderate hazard and
a Red colour rating indicates a high hazard.
Page 4 of 5
RMT
Reviewed: 15 May 2006
Printed: 05 Jan 2007
AIR-CON ANTI BACTERIAL DISINFECTANT & DEODORISER
PRODUCT NAME
While all due care has been taken by RMT in the preparation of the Colour Rating System, it is intended as a
guide only and RMT does not provide any warranty in relation to the accuracy of the Colour Rating System. As
far as is lawfully possible, RMT accepts no liability or responsibility whatsoever for the actions or omissions of
any person in reliance on the Colour Rating System.
This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the
Report Status
manufacturer's Material Safety Data Sheet ('MSDS').
It is based on information concerning the product which has been provided to RMT by the manufacturer or
obtained from third party sources and is believed to represent the current state of knowledge as to the
appropriate safety and handling precautions for the product at the time of issue. Further clarification regarding
any aspect of the product should be obtained directly from the manufacturer.
While RMT has taken all due care to include accurate and up-to-date information in this MSDS, it does not
provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any
loss, injury or damage (including consequential loss) which may be suffered or incurred by any person as a
consequence of their reliance on the information contained in this MSDS.
Risk Management Technologies
Prepared By
5 Ventnor Ave, West Perth
Western Australia 6005
Phone: +61 8 9322 1711
Fax: +61 8 9322 1794
Email: info@rmt.com.au
Web: www.rmt.com.au
MSDS Date: 15 May 2006
End of Report
Page 5 of 5
RMT
Reviewed: 15 May 2006
Printed: 05 Jan 2007
|