MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name INK MARAPROP PP
ITW TRANS TECH
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
AROMATIC HYDROCARBONES 64742-95-6 10 - 20 ACGIH TLV: NE
XYLENE 1330-20-7 5 - 15 OSHA TWA: 100ppm; OSHA STEL:
150ppm ACGIH TLV: TWA: 100
ppm STEL: 150 ppm NIOSH REL:
(Xylene) 100 ppm CL 200 ppm/10M
TWA:
PROPYLENE GLYCOL-1-METHYL 108-65-6 5 - 15 OSHA PELs: N/A
ETHER-2-ACETATE ACGIH TLVs: N/A
TWA: N/A
AROMATIC HYDROCARBONES 64742-94-5 5 - 10
(C9-C11)
1,3,5-TRIMETHYL BENZENE 25551-13-7 1-5 OSHA PEL: 25ppm ACGIH TLV:
25ppm
PROPYL BENZENE 103-65-1 1-5
3 HAZARDS IDENTIFICATION
Emergency Overview
No health damages are to be expected if product is used appropriately, properly and according to its designation.
Potential Health Effects, Skin
Absorbed through the skin.
Potential Health Effects, Eye
Irritating to eyes and mucous membranes.
Target Organs
May effect liver, kidneys and central nervous system.
Signs & Symptoms of Short-Term (Acute) Exposure
Irritant.
Printed On 23-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
518 INK MARAPROP PP
Material Id Trade Name 1/ 4
4 FIRST AID MEASURES
Skin
Wash immediately with soap and water. Remove and launder contaminated clothing before reuse.
Eye
Rinse immediately with plenty of water. Take to a physician for medical treatment.
Inhalation
Remove to fresh air and keep warm. Get medical attention if irritation occurs or breathing becomes difficult.
Ingestion
Do not induce vomiting. Seek medical advice immediately and produce the label or packaging.
5 FIRE FIGHTING MEASURES
Hazardous Combustion Products
Keep container tightly closed. Avoid heat, open flames, static electricity, electrical equipment and sparks.
Extinguishing Media
Foam, carbon dioxide, dry chemical powder.
Basic Fire Fighting Procedures
Full protective equipment including self container breathing apparatus should be used. Water-spray may be ineffective. If
water must be used, fog nozzles are highly preferable. Water may be used to cool closed containers to prevent pressure
build-up and possible auto-ignition or explosion when exposed to extreme heat.
Unusual Fire & Explosion Hazards
Keep container tightly closed. Avoid heat, open flames, static electricity, electrical equipment and sparks. Closed
contianers may explode when exposed to extreme heat. Application to hot surfaces requires special precautions.
44 潞C Method used: closed cup
Flash Point
315 潞C
AutoIgnition Temperature
0.7
Flammability Limits in Air, Lower, % by Volume
10.8
Flammability Limits in Air, Upper, % by Volume
6 ACCIDENTAL RELEASE MEASURES
Environmental Precautions
Dispose of or incinerate in accordance with local, state and federal regulations. Do not empty into drains.
Spill or Leak Procedure
Remove sources of ignition. Ventilate area. Remove by using suitable inert liquid absorbing material, e.g. kieselgur. Do not
breathe vapors.
7 HANDLING & STORAGE
Handling
FOR INDUSTRIAL USE ONLY! Use only in well ventilated areas. When using do not eat, drink or smoke. Wear suitable
protective clothing and gloves. Avoid contact with heat, sparks, open flame and static discharge. Avoid contact with skin
and eyes.
Storage
Store in tightly closed containers in a cool, dry, isolated, well-ventilated area away from heat, sources of ignition and
incompatibles.
Printed On 23-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
518 INK MARAPROP PP
Material Id Trade Name 2/ 4
Ventilation
Use and store with adequate ventilation, sufficient to keep exposure below current PELs or TLV limits. Use only in well
ventilated areas.
Local exhaust - yes
Mechanical Exhaust: Yes
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls
Use and store with adequate ventilation.
Eye Protection: Personal Protection Equipments (PPE)
Wear chemical safety goggles to prevent eye contact.
Skin Protection: Personal Protection Equipments (PPE)
Waterproof apron or suit to prevent contact with skin or clothing. Wear protective gloves if prolonged or repeated contact is
likely.
Respiratory Protection: Personal Protection Equipments (PPE)
Local exhaust: Yes
Mechanical Exhaust: Yes
If TLV or PEL of one hazardous component is exceeded, use approved respirators for organic vapors or approved self
contained breathing apparatus. Its use must be in compliance with all OSHA health and fit testing requirements. Use
respiratory protection when spray painting.
General
Wash hands thoroughly before eating, drinking, smoking, or using toilet facilities. Do not eat, drink or smoke during
handling. Use re-greasing skin cream.
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Pastous ink, Characteristic odor
145 潞C
Boiling Point
0.9 - 1.3 depending on shade
Specific Gravity
N/A
Melting Point
500 - 540 grams per liter
Percent Volatile
4 (mm Hg)
Vapor Pressure
>1
Vapor Density
moderate (parts of solvents)
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable under normal conditions of use. Avoid high temperatures, open flames, sparks and the use of ungrounded electrical
equipment.
Materials to Avoid:
Strong acides, alkalis and oxidizing agents.
Hazardous Reactions/Decomposition Products
None, provided the product is adequately stored and handled. In case of fire, mainly carbon dioxide, carbon monoxide,
soot, nitrogen oxides, metal oxides and hydrogen halides may be formed.
Hazardous Polymerization
Will not occur
Printed On 23-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
518 INK MARAPROP PP
Material Id Trade Name 3/ 4
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation, ingestion, skin and eye contact.
Carcinogenicity
NATIONAL TOXICOLOGY PROGRAM: No OSHA: No I.A.R.C. MONOGRAPHS: 3 (Component Xylene)
12 ECOLOGICAL INFORMATION
EcoToxicological Information
Dispose of or incinerate in accordance with local, state and federal regulations.
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Dispose of or incinerate in accordance with local, state, and federal regulations.
14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Paint Related Material
UN/NA Code 1263
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 2 Reactivity 0 Personal Prot. Equip. C
Following ingredients of this product are listed in SARA313
SARA Listed Ingredient Name CAS Number Maximum %
***SEE ATTACHED SARA TITLE III ADDENDUM***
16 OTHER INFORMATION
Disclaimer
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product
features and shall not establish a legally valid contractual relationship. This information is furnished without warranty,
expressed or implied, except that it is accurate to the best knowledge of ITW Trans Tech.
6/23/2008 9/15/2005
Replaces Sheet Dated
Completed On
Completed By
Printed On 23-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
518 INK MARAPROP PP
Material Id Trade Name 4/ 4
|