MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name INK TYPE PP NT
1
MSDS Number
- -0
CAS Number
ITW TRANS TECH
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
NAPHTHA, SOLVENT 150 64742-94-5 3-5% ND
NAPHTHA, SOLVENT 100 64742-95-6 35 - 50 % OSHA PEL: 100ppm ACGIH TLV:
125ppm
WHITE SPIRIT 10 - 20 % NA
3 HAZARDS IDENTIFICATION
Emergency Overview
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Reports have associated
repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage.
Effects of Long-Term (Chronic) Exposure
Health studies have shown that many solvents pose potential human health risks which may vary from person to person.
As a precaution, exposure to liquids and vapors should be minimized. -Prolonged or continuous inhalation of vapors may
result in delayed lung damage. -Repeated or prolonged inhalation of vapor may cause liver and kidney damage. -Repeated
inhalation of vapor in high concentration can change the blood picture.
4 FIRST AID MEASURES
Skin
Wash with soap and water.
Eye
Flush with water for at least 15 minutes, consult a physician.
Inhalation
Move to fresh air. Give artificial respiration if necessary.
Ingestion
Do not induce vomiting. Do not drink water, milk or oil. Consult physician or poison contaol center immediately. Treat
symptomatically.
Printed On 10-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
1 INK TYPE PP NT
Material Id Trade Name 1/ 3
Medical Conditions Aggravated by Exposure
ND
5 FIRE FIGHTING MEASURES
Extinguishing Media
Foam, carbon dioxide, dry chemical powder
Basic Fire Fighting Procedures
Water may be ineffective. Water should be used to cool containers exposed to fire. Fire fighting personnel should wear
self-contained breathing apparatus.
Unusual Fire & Explosion Hazards
Keep containers tightly closed, isolate from heat, sparks, electrical equipment and open flame. Closed containers may
explode when exposed to extreme heat. During emergency conditions over exposure to decomposition products may cause
a health hazard. Symptoms may not be immediately apparent. Obtain medical attention.
38 C
Flash Point
6 ACCIDENTAL RELEASE MEASURES
Spill or Leak Procedure
Refer to protective measures listed in sections 4, 5, 6, 8, and 9. Remove all sources of ignition, avoid breathing vapors,
ventilate area, remove with liquid binding material.
7 HANDLING & STORAGE
Handling
Do not take internally, use approved printing procedures, observe lable precautions. Keep closures tight and container
upright to prevent leakage. Do not weld or flame cut an empty drum, do not handle until the manufacturers safety
procautions have been read and understood.
Storage
Store containers out of sun and away from heat, sparks and open flames, close containers after each use. Consult N.F.P.A.
Code for additional storage requirements.
Ventilation
Provide sufficient ventilation to keep vapor concentration below the given TLV and LEL.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Use safety eyewear designed to protect against splash of liquids.
Skin Protection: Personal Protection Equipments (PPE)
Required for prolonged or repeated contact, refer to safety equipment supplier for effective glove recommendations.
General
Eye bath and shower should be available. Use chemical resistant clothing. Liquid may penetrate shoes and leather causing
delayed irritation.
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Colored paste w/ordor of organic solvents
147 C
Boiling Point
0
Specific Gravity
NI
Melting Point
Printed On 10-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
1 INK TYPE PP NT
Material Id Trade Name 2/ 3
51 - 73
Percent Volatile
NI
Vapor Pressure
NI
Evaporation Rate
NI
Vapor Density
NI
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable Avoid peroxides and other strong oxidizing materials.
Hazardous Reactions/Decomposition Products
Carbon monoxide, carbon dioxide, smoke, oxides of nitrogen.
Hazardous Polymerization
Will not occur.
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Ni
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Incinerate in an approved facility, do not incinerate closed containers. Dispose of in accordance with federal, state, and
local pollution control requirements.
14 TRANSPORT INFORMATION
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 2 Flammability 2 Reactivity 1 Personal Prot. Equip. C
16 OTHER INFORMATION
Disclaimer
ITW Trans Tech. Makes no warranty or takes liability, expressed or implied, as to the accuracy of information contained
herein; except that such information is, to the best of Trans Tech America's knowledge and belief, considered reliable and
accurate of the data supplied on the data sheet. Material may present unknown health hazards and should be used with
caution. Although hazardous ingredients are desribed herein, we cannot guarantee that these are the only hazards that
exist. Before adopting our products for any use, it is the responsibility of the user to confirm the suitability of any material
and be tested under your local conditions and in your own intended applications.
6/10/2008 1/7/1998
Replaces Sheet Dated
Completed On
Completed By
Printed On 10-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
1 INK TYPE PP NT
Material Id Trade Name 3/ 3
|