1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name INK-PS 65-06 NT
416
MSDS Number
ITW TRANS TECH
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
DIAPROPYLENGLYCOL-MONOMETHYLE 34590-94-8 10 - 15 % ND
BUTYL GLYCOL ACETATE 112-07-2 5 - 10 % N/A
SOLVENT NAPHTHA 64742-95-6 5 - 10 % NA
BUTANOL 3 78-83-1 < 0.5 % OSHA PEL: 100ppm ACGIH TLV:
150mg/m3
BUTYLGLYCOLATE 7397-62-8 1-5% ND
FORMALDEHYDE 50-00-0 < 0.5 % ND
3 HAZARDS IDENTIFICATION
4 FIRST AID MEASURES
Skin
Wash area thoroughly with soap and water and rinse. Do not use solvents or thinners to clean the skin.
Eye
Remove contact lenses, keep eyelids open. Keep eyelids lifted. Flush with water for 15 minutes. Call a physician.
Inhalation
Take the casualty into the fresh air and keep warm. Irregular breathing/no breathing: artificial respiration. Call a
physician.
5 FIRE FIGHTING MEASURES
38 C
Flash Point
300 C
AutoIgnition Temperature
6 ACCIDENTAL RELEASE MEASURES
Printed On 23-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
416 INK-PS 65-06 NT
Material Id Trade Name 1/ 3
Environmental Precautions
Do not empty into drains. If the product contaminates lakes, rivers or sewer systems, inform appropriate authorities in
accordance with local regulations.
Spill or Leak Procedure
Contain and collect spillage with non-combustible absorbent materials, e.g., sand, earth, vermiculite, diatomaceous earth
and place in container for disposal according to local regulations. Clean preferably with a detergent; avoid use of solvents.
7 HANDLING & STORAGE
Handling
Prevent the creation of flammable or explosive concentration of vapor in air and avoid vapor concentration higher than the
occupational exposure limits. Additionally, the product should only be used in areas from which all naked lights and other
sources of ignition have been excluded. Comply with the health and safety at work laws.
Storage
Prevent the creation of flammable or explosive concentrations of vapor in air and avoid vapor concentration higher than the
occupational exposure limits additionally, the product should only be used in areas from which all naked lights and other
sources of ignition have been excluded. Comply with the health and safety at work laws. Vapors are heavier than air and
may spread along floors. Vapors may form explosive mixtures with air. Containers which are opened must be carefully
resealed and kept upright to prevent leakage. Keep container closed. Never use pressure to empty: container is not a
pressure vessel. No smoking. Prevent unauthorized access.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Use safety eyewear designed to protect against splash of liquids.
Skin Protection: Personal Protection Equipments (PPE)
Use solvent proof rubber gloves. After washing hands, replace lost skin fat by fat containing skin creams.
Respiratory Protection: Personal Protection Equipments (PPE)
If work place limits are exceeded, a gas mask approved for this particular job must be worn.
General
In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious
person. Unconsciousness: Lateral position - call a physician.
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Pasty to liquid black in color and odor of solvent
186 C
Boiling Point
1.1 %
Specific Gravity
36 %
Percent Volatile
50 C
Vapor Pressure
20 C
Vapor Density
20 C
Viscosity
No
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable under recommended storage and handling conditions.
Printed On 23-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
416 INK-PS 65-06 NT
Material Id Trade Name 2/ 3
Hazardous Reactions/Decomposition Products
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and
dioxide, smoke, oxides of nitrogen.
11 TOXICOLOGICAL INFORMATION
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Do not empty into waters or drains. Bring the empty containers to scrap reclamation or reconditioning. Packing drums which
have not been emptied properly must be treated as special rubbish.
14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Printing Ink
Hazard Class 3 UN/NA Code 1210
Packaging Group Class III
Labels Required Flammable liquid
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 2 Reactivity 1 Personal Prot. Equip. B
16 OTHER INFORMATION
Disclaimer
This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of ITW
Trans Tech. The data on this sheet applies only to the specific material designated herein. ITW Trans Tech. assumes no
legal responsibility for use of reliance upon this data.
6/23/2008 9/25/2007
Replaces Sheet Dated
Completed On
Completed By
Printed On 23-Jun-08
ND = No Data NA = Not Applicable NI = Not Indicated
416 INK-PS 65-06 NT
Material Id Trade Name 3/ 3
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP