MATERIAL SAFETY DATA SHEET FOR: MAXBOND
Replaces: Oct, 2000. Date of issue: May, 2001.
COMPANY DETAILS
Company: H. B. Fuller Company
Address: 16-22 Red Gum Drive, Dandenong South VIC 3175
Telephone: (03) 9797 6222
Emergency Telephone No: 1800 033 111
Not classified as hazardous according to criteria of Worksafe Australia
IDENTIFICATION
Product Name: Maxbond
Other Names: Construction Adhesive, ADHESIVES containing flammable liquid.
Manufacturer鈥檚 Code: Not Applicable
UN Number: 1133
Dangerous Goods Class: 3
Subsidiary Risk: None allocated
Hazchem Code: 3[Y]
Poisons Schedule: Not scheduled
Packaging Group: III
Use: For bonding various substrates in the building industry. Apply directly, in bead form,
using a caulking gun.
Physical Description/Properties
Appearance: Thick beige paste
Melting Point: Not established
Boiling Point: > 87掳C (heptane)
Vapour Pressure: 16.6kPa at 15掳C (heptane)
Specific Gravity: approx. 1.07
Flashpoint: <-12掳C (heptane)
Flammability Limits: Not Established
Solubility in water: Not Soluble
Other Properties
None that are relevant
Ingredients
CHEMICAL ENTITY CAS NO PROPORTION
Heptane 142-82-5 High
Kaolin 1332-58-7 High
Aromatic hydrocarbon resins Not available Med
SBS thermoplastic rubber Not available Med
Other ingredients determined not to be hazardous Not applicable Low
Low <10% Med. 10-30% High 30-60% V High >60%
Page 1 of 4
MATERIAL SAFETY DATA SHEET FOR: MAXBOND
Replaces: Oct, 2000. Date of issue: May, 2001.
HEALTH HAZARD INFORMATION
Risk Phrases:
R11 Highly flammable.
Health Effects
ACUTE:
Swallowed:
An unlikely route of entry. Ingestion may result in vomiting and nausea.
Eye:
An eye irritant due to the presence of heptane.
Skin:
Contact with skin may result in mild irritation.
Inhaled:
Overexposure to vapours in poorly ventilated areas will cause irritation of the nose, throat and
respiratory tract and may cause dizziness, headaches, nausea or unconsciousness. Inhalation of high
concentrations can produce central nervous system depression which can lead to loss of co-
ordination, impaired judgement and, if exposure is prolonged, unconsciousness and possibly death.
CHRONIC:
Prolonged or repeated skin contact may lead to dermatitis due to the defatting effect of heptane.
First Aid
Swallowed:
If swallowed, rinse mouth thoroughly with water. Give plenty of water to drink. Do NOT induce
vomiting. If vomiting occurs, ensure that victim鈥檚 head is lower than hips to prevent vomitus entering
lungs. See a doctor if any ill effects persist
Eyes:
Hold eyelids open and irrigate immediately with copious amounts of water for 15 minutes. See a
doctor.
Skin:
Wash affected areas with copious quantities of soap and water immediately.
Remove contaminated clothing and wash before reuse.
Inhaled:
Remove from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen
remaining clothing. Restore breathing if necessary. Allow patient to assume most comfortable position
and keep warm. See a doctor.
First Aid Facilities:
Have eyewashes available where eye contact can occur. Provide safety showers.
Page 2 of 4
MATERIAL SAFETY DATA SHEET FOR: MAXBOND
Replaces: Oct, 2000. Date of issue: May, 2001.
Advice to Doctor
Treat symptomatically.
PRECAUTIONS FOR USE
Safety Phrases:
S2 Keep out of the reach of children.
S23 Do not breathe vapour.
S24 Avoid contact with skin
Exposure standards: : TWA
Heptane 370ppm (Manufacturer鈥檚 recommendation)
2mg/m3 (ACGIH)
Kaolin
Engineering Controls:
Local exhaust ventilation preferred. Provide ventilation to control exposure levels below airborne
exposure limits.
Personal Protection:
Wear safety overalls, safety glasses and rubber gloves. If airborne exposure limits are likely to be
exceeded, wear organic half face canister type respirators. Ensure that cartridges are correct for the
potential air contamination and are in good working order ( for selection guide see AS 1715). Always
wash hands before smoking, eating, drinking or using the toilet.
Flammability:
Classified as a class 3 (highly flammable) liquid. All potential sources of ignition, (open flames, pilot
lights, welding equipment, spark producing switches and electrical equipment etc), must be eliminated
both in and near the work area. DO NOT SMOKE.
SAFE HANDLING INFORMATION
Storage and Transport:
Keep containers securely sealed and protected against physical damage. Store in a well ventilated
area, away from sources of heat and ignition. This product is a Class 3 Dangerous Good having the
Proper Shipping Name ADHESIVES containing flammable liquid. Transport as required by the ADG
Code.
Hazardous Polymerisation:
Will not occur
Incompatibilities:
None established.
Spills and Disposal:
Contain - prevent contamination of waterways and drains. Immobilise using absorbent and transfer to
a suitable container for disposal. Use non-sparking tools. For disposal, consult responsible authority
regarding statutory requirements
Page 3 of 4
MATERIAL SAFETY DATA SHEET FOR: MAXBOND
Replaces: Oct, 2000. Date of issue: May, 2001.
Fire/Explosion Hazard:
This product is highly flammable. Fire fighters to wear self contained breathing apparatus if risk of
exposure to vapours. Fire fighters to wear full protective equipment. Keep containers cool with water
spray to avoid pressure build up and rupture of containers.
Hazardous Decomposition:
Incomplete combustion can yield low molecular weight hydrocarbons, carbon monoxide and other
hazardous products of combustion.
OTHER INFORMATION
No data
CONTACT POINT
Technical Manager (03) 9797 6222
This MSDS summarises at the date of issue our best knowledge of the health and safety hazard information of the
product, and in particular, how to safely handle and use the product in the workplace. Since H.B.Fuller Company
Australia Pty Ltd cannot anticipate or control the conditions under which the product may be used, each user
must, prior to usage, review this MSDS in the context of how the user intends to handle and use the product in the
workplace.
If clarification or further information is needed to ensure that an appropriate assessment can be made, the user
should contact this company.
Our responsibility for the products sold is subject to our standard terms and conditions, a copy of which is sent to
our customers and is also available on request.
Page 4 of 4
|