Material
Safety
Hi-Yield(R) Mole and Gopher Bait
Data
Sheet
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Name: Voluntary Purchasing Groups, Inc. Box 460, Bonham, TX 75418
Emergency Telephone: (903) 583-5501 or (800) 424-9300 (Chemtrec)
For Additional Information Contact: Product Manager or Date Prepared: 01/23/00
Chemtrec
Common Name (Used on Label): Chemical Family: Mixture
Hi-Yield(R) Mole and Gopher Bait
Chemical Name: Mixture Formula: Zinc Phosphide mixture
Trade Name & Synonyms: Hi-Yield(R) Mole and Gopher Bait
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
HAZARDOUS COMPONENT CAS NUMBER % (TYPICAL) TLV (UNITS) PEL (UNITS)
Zinc Phosphide [1] 1314-84-7 2.0 Not established Not established
[1]NOTE: This is a toxic chemical and is subject to the reporting requirements of section 313 of Title II of the
Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
PEL: Permissible Exposure Limit established by the Occupational Safety and Health Administration.
TLV: Threshold Limit Value recommended by the American conference of Governmental Industrial Hygienists.
SECTION 3 - PHYSICAL DATA
BOILING POINT (掳F) SPECIFIC GRAVITY (H2O=1) VAPOR PRESSURE (mm Hg)
1100 degrees C Not determined Not determined
PERCENT VOLATILE BY VOLUME (%) VAPOR DENSITY (AIR=1) EVAPORATION RATE (ethyl ether=1)
Not determined Not determined determined Does not apply
SOLUBILITY IN WATER REACTIVITY IN WATER
Insoluble Will react with water to produce highly toxic phosphine
APPEARANCE AND ODOR
Gray crystalline powder; garlic odor
SECTION 4 - FIRE AND EXPLOSION DATA
FLASH POINT (掳F) FLAMMABLE LIMITS IN AIR (% by volume)
Does not apply Lower: Not determined Upper: Not determined
EXTINGUISHING MEDIA AUTO IGNITION TEMPERATURE
Dry chemical, soda ash, lime, or sand. Not determined
UNUSUAL FIRE AND EXPLOSION HAZARDS
Will react slowly with water, and more rapidly with dilute acids to release highly toxic and spontaneously flammable
phosphine.
SPECIAL FIRE FIGHTING PROCEDURES
Product Name: Hi-Yield(R) Mole and Gopher Bait ID Number: Page: 1
Move container from fire area if possible. Do not use water or foam. Avoid breathing toxic vapors. Keep upwind.
Utilize self-contained breathing apparatus with full facepiece operated in pressure demand or other positive pressure
mode.
SECTION 5 - HEALTH INFORMATION
PRIMARY ROUTES OF EXPOSURE AND TARGET ORGANS
Inhalation, ingestion, eye or skin contact.
SIGNS AND SYMPTOMS OF EXPOSURE
(1) ACUTE OVEREXPOSURE
Zinc phosphide is a highly toxic hepatoxin. Poisoning affects the liver, kidneys, nervous system, and lungs. Inhalation
or ingestion may result in symptoms of headache, dizziness, nausea, vomiting, fatigue, coughing, jaundice,
paresthesias, ataxia, tremor, hypertension, dyspnea, pulmonary edema, cyanosis, shock, cardiac arrythmias,
convulsions, and coma. Contact with moist skin or the eyes may result in burns.
(2) CHRONIC OVEREXPOSURE
Prolonged inhalation or ingestion may cause toothache, followed by swelling of the jaw, and later necrosis of the jaw,
anemia, and bone fractures.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Disorders of the kidneys, nervous system, and lungs.
CHEMICAL/COMPONENT LISTED AS CARCINOGEN OR POTENTIAL CARCINOGEN
None
NTP IARC OSHA
YES NO YES NO YES NO
OTHER EXPOSURE LIMITS
ACGIH TLV for nuisance dusts=10mg/m3; OSHA PEL for nuisance dusts=15mg/m3
EMERGENCY AND FIRST AID PROCEDURES
INHALATION: Remove to fresh air. If not breathing, give artificial respiration, preferably mouth-to-mouth. If breathing is
difficult, give oxygen. Call a physician. INGESTION: Induce vomiting immediately by giving two glasses of water and
sticking finger down throat. Never give anything by mouth to an unconscious person. Call a physician. EYE OR
SKIN CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes. Call a physician. Flush skin with
water. Wash clothing before reuse.
SECTION 6 - REACTIVITY DATA
STABILITY CONDITIONS TO AVOID
Unstable Stable Keep dry and away from acids.
INCOMPATIBILITY (Materials to Avoid)
Water, acids, oxidizers
HAZARDOUS DECOMPOSITION PRODUCTS
Reaction will produce phosphine. Thermal decomposition releases irritating oxides of phosphorous and toxic fumes of
zinc oxide.
HAZARDOUS POLYMERIZATION CONDITIONS TO AVOID
May Occur Will Not occur Does not apply
Product Name: Hi-Yield(R) Mole and Gopher Bait ID Number: Page: 2
SECTION 7 - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS LEAKED OR SPILLED
Eliminate ignition sources. Do not touch spilled material. Do not get water on spilled material or inside container.
Using a shovel place material into clean, dry, labeled container and seal. Neutralize spill residue with agricultural lime,
slaked lime, crushed limestone, or sodium bicarbonate. Comply with all applicable governmental regulations
concerning spill reporting, handling, and disposal of waste. Run-off to sewer may create fire or explosion hazard.
WASTE DISPOSAL METHOD
Dispose of in accordance with Federal, State, and local regulations.
SECTION 8 - PERSONAL PROTECTION INFORMATION
RESPIRATORY PROTECTION
NIOSH/MSHA approved respiratory devices to protect against particulate matter.
VENTILATION
General or local exhaust to maintain employee exposure below the TLV/PEL.
PROTECTIVE GLOVES
Impervious material to prevent skin contact.
EYE PROTECTION
Splash proof or dust resistant safety goggles to prevent eye contact with this substance. Contact lenses should not
be worn.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
When necessary utilize impervious clothing and other equipment to prevent contact with this substance.
SECTION 9 - SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING & STORING
Store in a cool, dry, well ventilated area, away from acids and water. Contact with water produces toxic and
flammable gas.
OTHER PRECAUTIONS
Eye wash fountain and quick drench shower should be available.
SECTION 10 - OTHER INFORMATION
The information contained within was obtained from authoritative sources and is believed to be accurate
for the manner in which the product is intended to be used. Other uses could result in ramifications which
are not included within this document.
Product Name: Hi-Yield(R) Mole and Gopher Bait ID Number: Page: 3
|