85-45
Product Data Sheet
PROPERTIES FOSTER FOS-STIK鈩? ADHESIVE
FOSTER FOS-STIK ADHESIVE is a rapid tacking, low
COLOR:
Clear, light amber soak-in aerosol spray adhesive used to adhere a wide
variety of insulation materials to metal or other construction
surfaces where immediate adhesion and high initial
APPLICATION CONSISTENCY:
Web Spray, Aerosol Can Packaging adhesive strength are required. It can be used either as a
one-way wet or as a two-way contact cement.
AVERAGE WEIGHT / U.S. GALLON (ASTM D 1475):
5.0 lbs. (0.6 kg/l) FOS-STIK ADHESIVE is waterproof, flexible, transparent
and non-staining. It contains no chlorinated solvents or
ozone depleters. It cleans up easily with Mineral Spirits.
AVERAGE NON-VOLATILE (ASTM D 2369):
14-16% by volume (20-21% by weight)
FOS-STIK ADHESIVE meets ASTM C916, Type IV (ASC-A-
7001A, Type IV) requirements.
CAN CONTENTS:
20 fluid ounces
Net Wt. 12 oz. (340 grams) FOS-STIK ADHESIVE can also be used for adhering
difficult substrates like polyethylene film, phenolic,
polyolefin, elastomeric foam, or most plastics, leather, wood,
COVERAGE RANGE (FSTM 72):
(Subject to type of service and nature of material being and cloth.
bonded)
30-45 ft2/can (9.1-13.7 m) FOS-STIK ADHESIVE contains no asbestos, lead, mercury,
or mercury compounds.
BONDING TIME (ASTM D 66):
0 to 5 minutes LIMITATIONS
Store and apply between 40掳F (4掳C) and 100掳F (38掳C).
SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) Not intended for use on vinyl.
-40潞F to 180潞F (-40潞C to 82潞C)
WET FLAMMABILITY (ASTM D 3278):
Flash Point -40潞F (-40潞C)
鈩? Trademark of Specialty Construction Brands, Inc.
Visit us on the web at www.fosterproducts.com
8094
4/03
Specialty Construction Brands, Inc.
601 West Campus Drive 鈼? Suite C7 鈼? Arlington Heights, IL 60004 鈼? 800-231-9541 鈼? fax 800-942-6856
APPLICATION GUIDE
FOR
FOSTER FOS-STIK鈩? ADHESIVE
85-45
MATERIAL PREPARATION
Always shake well before using. Apply only to clean, dry surfaces that are free from dust, dirt, and oil.
APPLICATION
Never aim valve at face. Hold can upright and apply adhesive in a side to side motion 10-14 inches from surface. Surface should be
clean and dry. Spray at 60潞-90潞F for best results. After each use tip can upside down and press tip until spray is free of adhesive.
For more permanent bonds apply adhesive to both surfaces to be mated, spraying the adhesive in opposite directions on each
surface. Allow adhesive to tack and then press together using firm, hard pressure to assure intimate contact across the entire
bonding surface. Use care in placement since the bond will not be adjustable once contacted.
SAFETY
DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR MAY CAUSE FLASH FIRE. Use with adequate ventilation. Consult
can label and MSDS for product hazards and precautions in use.
CLEAN-UP
To clean up use mineral spirits (flammable) or chlorinated solvents (non-flammable).
CUSTOMER SERVICE鈥?800-231-9541 OR 800-338-2975
IMPORTANT: Specialty Construction Brands, Inc. warrants that each of its products will be manufactured in accordance with the specifications in effect on the date of
manufacture. WE MAKE NO OTHER WARRANTIES AND EXPRESSLY DISCLAIM ANY WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If a product fails to meet this limited warranty, purchaser鈥檚 sole and exclusive remedy is replacement of the product or, at our option, refund of the purchase
price. OUR ACCEPTANCE OF ANY ORDERS FOR THE PRODUCT IS EXPRESSLY CONDITIONAL UPON PURCHASER鈥橲 ASSENT TO THE TERMS ON THE
APPLICABLE INVOICE.
ADEQUATE TESTS: The information contained herein we believe is correct to the best of our knowledge and tests. The recommendations and suggestions herein are
made without guarantee or representation as to results. We recommend that adequate tests be performed by you to determine if this product meets all of your
requirements. The warranted shelf life of our products is six months from date of shipment to the original purchaser.
For industrial use only. Keep out of reach of children.
Consult Material Safety Data Sheet and container label for further information.
DSF85-45
|