Brilliance - Harrell's Page 1 of 4
MSDS Number: 710045 March 14, 2007
MATERIAL SAFETY DATA SHEET
Brilliance - Harrell's
1. PRODUCT AND COMPANY IDENTIFICATION
Product Identification
Product Name: Brilliance - Harrell's
Chemical Name: Non-ionic surfactant blend
Chemical Family: Polyoxyalkylene polymer
CAS Number: Blend
Company Identification
Milliken Chemical
P.O. Box 817
1440 Campton Road
Inman, SC 29349 USA
1-864-472-9041 (For questions and emergencies)
1-800-424-9300 or 1-703-527-3887 (CHEMTREC)
PRODUCT USE:
Liquid for fine cut turf to reduce heat stress.
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW:
The health hazards of this product should be low under normal industrial and commercial uses. May cause eye irritation. Avoid eye
contact. Where contact with this material is likely, chemical goggles are recommended.
HFRP Rating:
Health - 1
Flammability - 1
Reactivity - 0
Personal Protection Index - B
EYE:
May cause eye irritation. Discomfort and blurring of vision may occur. Not known to cause permanent injury to eye tissue.
SKIN:
Prolonged or repeated skin contact may cause irritation.
INHALATION:
No known hazards in normal industrial use.
INGESTION:
No information regarding ingestion available.
MISCELLANEOUS:
Solutions extremely slippery when spilled.
3. COMPOSITION/INFORMATION ON INGREDIENTS
COMPONENT LISTING:
UNCONTROLLED DOCUMENT
Brilliance - Harrell's Page 2 of 4
MSDS Number: 710045 March 14, 2007
Chemical Name Amount CAS Number
BRILLIANCE 100.0 % Proprietary
4. FIRST AID MEASURES
EYE CONTACT FIRST AID:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops or
persists.
SKIN CONTACT FIRST AID:
Wash affected area with large amounts of soap and water. Wash contaminated clothing before reuse. Get medical attention if
irritation develops or persists.
INHALATION FIRST AID:
Although this product is not known to cause respiratory problems, if breathing is difficult, remove to fresh air and provide oxygen.
Avoid circumstances that produce respirable particles. Get medical attention if cough or other symptoms develop.
INGESTION FIRST AID:
Ingestion is not considered a potential route of exposure. If swallowed, immediately give 2 glasses of water. Never give anything by
mouth to an unconscious person. Contact a physician.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
COC Flash Point: 235 C (455.0 F)
Autoignition Temperature: N/A
FLAMMABLE LIMITS IN AIR
LEL: N/A
UEL: N/A
EXTINGUISHING MEDIA:
Water, carbon dioxide, foam or dry powder.
FIRE & EXPLOSION HAZARDS:
No known unusual hazards in a fire/explosion situation.
FIRE FIGHTING INSTRUCTIONS:
Evacuate non-emergency personnel to a safe area. As in any fire, wear self-contained breathing apparatus pressure-demand
MSHA/NIOSH (approved or equivalent) and full protective gear. Avoid breathing smoke, fumes, and decomposition products.
6. ACCIDENTAL RELEASE MEASURES
SAFEGUARDS (PERSONNEL):
Wear appropriate personal protective equipment.
SPILL PROCEDURE:
Absorb spills with inert material. Clean residual material by washing area with water. Collect washings for disposal.
INITIAL CONTAINMENT:
Contain spilled material. Floor may become slippery.
7. HANDLING AND STORAGE
RECOMMENDED STORAGE TEMPERATURE
UNCONTROLLED DOCUMENT
Brilliance - Harrell's Page 3 of 4
MSDS Number: 710045 March 14, 2007
Minimum: 4 C (39.2 F)
Maximum: 50 C (122.0 F)
HANDLING (PERSONNEL):
Avoid prolonged contact with skin or eyes. Wash hands thoroughly after handling. Wash contaminated clothing before reuse.
HANDLING (PHYSICAL ASPECTS):
Keep container closed to avoid contamination.
STORAGE PRECAUTIONS:
Store in a well ventilated place.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses. Where contact with this material is likely, chemical goggles are recommended.
SKIN PROTECTION REQUIREMENTS:
Wear protective gloves to minimize skin contamination. Selection of specific items such as gloves, boots, apron or full-body suit
will depend on operation.
RESPIRATORY PROTECTION REQUIREMENTS:
Under normal use conditions, with adequate ventilation, no special respiratory protective equipment is required.
EXPOSURE GUIDELINES:
No Information Available.
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Liquid
COLOR: Pale Yellow
ODOR: Mild odor
VAPOR PRESSURE: < 1 mm Hg @ 25 C
VAPOR DENSITY: > 1 (Air = 1)
SOLUBILITY IN WATER: Soluble
SPECIFIC GRAVITY: 1.04 (Water = 1)
BULK DENSITY: 8.66 lbs/gal
MELTING/FREEZING POINT: <0C
PH: 5 - 7.5
% VOLATILES: < 1 % @ 100 C
10. STABILITY AND REACTIVITY
STABILITY:
This product is stable at ambient conditions.
POLYMERIZATION:
Hazardous polymerization will not occur.
INCOMPATIBILITY WITH OTHER MATERIALS:
Avoid contact with strong bases. Avoid contact with strong oxidizing agents.
DECOMPOSITION:
In the case of a fire, oxides of carbon, hydrocarbons, fumes, and smoke may be produced.
UNCONTROLLED DOCUMENT
Brilliance - Harrell's Page 4 of 4
MSDS Number: 710045 March 14, 2007
11. TOXICOLOGICAL INFORMATION
No information available.
12. ECOLOGICAL INFORMATION
No information available.
13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL:
All waste materials should be packaged, labeled and transported in accordance with all national, state/provincial, and local
requirements.
14. TRANSPORT INFORMATION
PRODUCT LABEL: Brilliance - Harrell's
D.O.T. SHIPPING NAME: Not Regulated
D.O.T. LABEL: Non Hazardous
15. REGULATORY INFORMATION
CHEMICAL INVENTORY INFORMATION:
This material or all of its components are listed on the Inventory of Existing Chemical Substances under the Toxic Substance
Control Act (TSCA). This material or all of its components are listed on the Canadian Domestic Substances List (DSL). This
material or all of its components are listed (or considered as having been notified) on the European Inventory of Existing Chemical
Substances (EINECS).
16. OTHER INFORMATION
PREPARED BY: Randy Petrea
APPROVED BY: Randy Petrea
TITLE: Senior Research Chemist
APPROVAL DATE: August 30, 2006
SUPERCEDES DATE: August 16, 2006
MSDS NUMBER: 710045
**********************************************************************
The information contained in this Material Safety Data Sheet is furnished without warranty, expressed or implied, except that it is
accurate to the best knowledge of Milliken Chemical. The data on this sheet are related only to the specific material designated
herein. Milliken Chemical assumes no legal responsibility for use or reliance upon these data.
**********************************************************************
END OF MSDS
**********************************************************************
UNCONTROLLED DOCUMENT
|