Aftek                                 250 Princes Hwy, Dandenong, Vic., 3175

                                       P.O. Box 548, Noble Park, Vic., 3174

Aitken Freeman Technologies            Phone (03) 9701 3955

                                       Fax (03) 9701 3956





      MATERIAL SAFETY DATA SHEET

    ----------------------------------------------------

           IDENTIFICATION



Product: Aftek Coolroom Mastic

Chemical Family: Oil-based mastic.

Uses: A joint sealant designed to remain permanently flexible.

UN No: None assigned                  Class: Not applicable

Subsidiary Risk: Not applicable.      Hazchem Code: Not applicable

Poisons Schedule: Not scheduled       Appearance: Pigmented paste.

Odour: Hydrocarbon.                   Boiling Point: >250° C.

Melting Point: Not applicable.        Vapour Pressure: Not determined.

Flash Point: >295° C                  Percent Volatiles: Nil.

Specific Gravity: 1.5(approx.)        Solubility in Water: Insoluble.

Autoignition Temp: Not determined

Flammability Limits: Not applicable



Ingredients:                   Content                       CAS. No.

Mineral process oil            10 - 60%

Inorganic pigments and fillers >60%









MSDS:                         Aftek Coolroom Mastic                        22/02/06

                                                                         Page 1 of 3

   HEALTH HAZARD INFORMATION



Health Effects



Swallowed: Of low oral toxicity. Ingestion is not expected to occur in normal

industrial use.

Eye: Mild irritant.

Skin: Mild irritant.

Inhaled: Vapour pressure is so low that inhalation does not present a problem

under normal conditions.



First Aid



Swallowed: DO NOT induce vomiting. Give a glass of water. Contact a doctor or

Poisons Information Centre.

Eye: The eye should be flushed with water for 15 minutes, padded and the patient

taken to hospital.

Skin: Contaminated clothing should be removed and skin washed thoroughly.

Inhaled: Not known to be a problem.



Poisons Information Centre: 131 126 (ANYWHERE IN AUSTRALIA)









MSDS:                        Aftek Coolroom Mastic                   22/02/06

                                                                   Page 2 of 3

        PRECAUTIONS FOR USE

Exposure Limits: (NH & MRC Occupational Health Guide - May 1986)



Occupational exposure limits not applicable due to the non hazardous nature of

the product and its method of use.



Ventilation: Use in a well ventilated area.

Personal Protection: Wear PVC or rubber gloves to avoid skin contamination.

Flammability: The product will not burn at normal temperatures.







   SAFE HANDLING INFORMATION

Storage and Transport: Product is non hazardous and needs no special

requirements for storage or transport.



Spills and Disposal: Isolate spill. Collect and place in a sealed container.

Dispose of in an approved waste disposal facility.



Fire/Explosion Hazard: Product is not flammable, but is combustible and will

burn at elevated temperatures.



Extinguishing Media: Use dry chemical, CO2 or foam.



Special Fire Fighting Procedures: Wear self contained breathing apparatus in

confined spaces.



Dangerous Decomposition Products: Carbon dioxide, carbon monoxide, and

hydrocarbons may be produced on burning.



Contact Point: Technical Manager, phone (03) 9701 3955 (business hours.)









MSDS:                         Aftek Coolroom Mastic                     22/02/06

                                                                      Page 3 of 3