MATERIAL SAFETY DATA SHEET
MULTITHANE STD &
MULTITHANE UV
Health Information Personal Protection
Classified as hazardous material
according to the criteria of the Engineering Controls The use of solvent resistant gloves,
NOHSC Follow normal good industrial hygiene coveralls and goggles (against
and chemical precautions, particularly splashes) are recommended. Keep
Identification in respect of flammability.
flame, sparks and sources of ignition
Use in ventilated areas and provide
Multithane Std
away from uncured product. Vapours
flame proof artificial ventilation if
Multithane UV
may collect in low-lying areas. Ensure
required to maintain concentrations
Other Name: Liquid moisture
ventilation, either natural or artificial, is
below Xylene Exposure Standard of
curing
present to disperse vapours.
350g/m2(TWA) 655 mg/m2 (STEL) or
polyurethane
100ppm.
waterproofing
Keep sparks and ignition sources away
Safe Handling
membrane
from product during application, as
Information
product is flammable.
UN Number: 1263
Storage/Handling:
DG Class: NA
Health Effects Store away from flame and ignition
Hazchem Code: 3[Y]
sources. Keep cool, dry and away from
Swallowed:
Poison Schedule: 6
Ingestion could cause irritation and direct sunlight.
Packing Group 3 (Steel Drums)
burning sensation.
Spills:
Use: Waterproofing
Eye:
Remove sources of ignition. Prevent
Membrane
Irritation and burning. Long-term
spills from entering drains and
exposure can cause damage.
Physical Description/ waterways. Absorb with sand or oil
absorbing material. Discard to suitable
Properties / Appearance Skin:
landfill.
Irritation, burning sensation
Appearance: Coloured high
viscosity liquid.
Inhaled: Disposal:
Boiling Point: approx 300潞C.
Irritation with asthma like symptoms. Shovel into drums, incinerate or land
Vapour Pressure: Approx 6.00
It is unlikely that product would be tip in accordance with local regulation.
(Xylene).
inhaled due to its viscosity. Inhaled
Percent Volatile: +- 40%.
matter is likely to be Xylene.
Specific Gravity: +- 1.05. Fire/Explosion:
28掳C (Xylene)
Flash Point: Containers should be kept cool with
First Aid
Flammability Lmt.: 1.1 鈥? 7.0% water spray to prevent pressure build
Swallowed:
(Xylene) up. Burning product may product dense
Do not induce vomiting. Give milk or
Solubility In Water: Insoluble.
irritating smoke. Heat may cause cans
water to drink. Seel medical advice.
to rupture.
Ingredients Eye:
Chemical CAS No. Proportion Flush eye with copious amounts of
Contact
Urethane clean water. Get medical attention.
Duram Industries Pty Ltd
Polymer Not Known 30-60%
Tel: 02 9624-4077 - Australia
Inert Fillers Not Known 10-30% Skin:
Phone 64(09) 527 0551 - New Zealand
Xylene 1330-20-7 30-60% Wipe product off skin. Wash skin with
Minor soap and water. Apply moisturising
Ingredients Not Known <5% cream. JAN 04
IMPORTANT
The product information contained in this data sheet is given in good faith based upon our knowledge and current information and does not imply any warranty.
The information contained herein is provided on the basis that the product is applied in a proper manner strictly in accordance with instructions onto correctly prepared surfaces which shall remain
sound, stable and free of cracking or movement. Instruction application deviation may diminish or negate the performance of the product. Under no circumstances will the Company be liable for any
loss, consequential or otherwise, arising from the use of the product. We reserve the right to amend specification and application techniques without prior notice.
DURAM INDUSTRIES (PTY) LTD ACN 002 968 809 ABN 77 002 968 809
The Ultimate in Waterproofing & Protective Coating Technology
NEW SOUTH WALES: 51 Prince William Drive, Seven Hills, NSW 2147 Tel: (02) 9624 4077 Fax: (02) 9624 4079
WESTERN AUSTRALIA: 49 Banksia Road, Welshpool, WA 6106 Tel: (08) 9350 6565 Fax: (08) 9356 7575
QUEENSLAND: 775 Kingsford Smith Drive, Eagle Farm QLD 4009 Tel: (07) 3868 4888 Fax: (07) 3868 4390
NEW ZEALAND: Unit 3, 65 Elizabeth Knox Place, Mount Wellington, Auckland Tel: (09) 527 0551 Fax: (09) 527 0552
|