MATERIAL SAFETY DATA SHEET
PAVECURE W
COMPANY DETAILS Page 1 of 3
Name: Aitken Freeman Pty. Ltd.,
Address: 7 / 7-9 Brough St, Springvale Vic 3171
Phone: (03) 9701 3955
Fax: (03) 9701 3956
IDENTIFICATION
Product Name: Pavecure W U.N. Number: N/A
Shipping Name: N/A Dangerous Goods Class: N/A
Subsidiary Risk: N/A Hazchem Code: N/A
Poisons Schedule: 5 Packaging Group: N/A
Chemical Description: Emulsion of resin and low aromatic solvent in water.
Use: Concrete curing compound.
PHYSICAL DESCRIPTION / PROPERTIES
Appearance: Milky homogeneous liquid Flammability Limit (%):
See Fire/
or with red fugitive dye Explosion
Hazard
Solubility in water (g/l):Emulsifies In organic solvents: Part Soluble
Boiling Point: 100-196掳C Vapour Pressure @25掳C NAS
pH: 7 Relative Density: 0.98
Volatiles (%): 10% hydrocarbon, 70% water Shelf Life: 12 months
Flash Point (掳C): 84掳C Other properties: NAS
INGREDIENTS
Threshold Limit Value
Chemical Entity CAS Number Proportion %
Hydrocarbon liquid 64742-89-7 Low approximately 10% WW
Hydrocarbon resin 68131-77-1 20-40%
Due to composition or concentration, all other ingredients exempted from HN and MRC
Standard for Uniform Scheduling of Drugs and Poisons and TLV-Worksafe Australia.
N/A = Not applicable MSDS Pavecure W Edition 7鈥?.01/02/08
NAS = Not assigned
Page 2 of 3
HEALTH HAZARD INFORMATION
HEALTH EFFECTS
Acute: Swallowed: Slight irritant
Eye: Moderate irritant
Skin: Slight skin irritant
Inhaled: Irritant, causes dizziness, loss of consciousness.
Chronic:
FIRST AID
Swallowed: Do not induce vomiting. Give glass of water. Contact a doctor or
Poisons Information Centre.
Eye: Remove contact lenses. While holding eyes open gently flush with
water for 15 minutes. Promptly obtain medical aid.
Skin: Remove contaminated clothes. Wash before re-use. Wash
contaminated skin well with soap and water.
Inhaled: Remove to fresh air. Avoid becoming a casualty.
Apply artificial respiration if breathing stopped. Seek medical aid.
First Aid Facility: Ensure availability of clean water for eye/skin wash.
Advice to Doctor: Treat symptomatically.
PRECAUTIONS FOR USE
Exposure Standards: See ingredients, page 1.
Engineering Controls:
Ventilation: Using non-ignitive equipment assure positive ventilation or suitable
breathing equipment, for example, 3M Model 8712, to maintain
vapour levels below TLV-TWA.
Personal Protection: Gloves Long Impervious: YES Overalls: YES
Eye Protection: YES
Flammability: N/A Flashpoint 84掳C
SAFE HANDLING INFORMATION
Storage and Transport: Avoid heat, flames, oxidising agents
Spills: Wear appropriate personal protection and ensure adequate
ventilation.
Sweep up first: YES
Wash down with detergent/water: YES
Absorb in dry inert material: YES
Disposal: Observe all Federal, State and Local regulations.
Fire/Explosion Hazard: Explosion Limit - upper:lower NAS
Dust explosion hazard: N/A
Hazardous decomposition products: NAS
Hazardous polymerisation products/reaction Unlikely
Extinguishing medium Foam CO虏
Firefighters should wear self contained breathing apparatus in
enclosed areas.
N/A = Not applicable MSDS Pavecure W Edition 7鈥?.01/02/08
NAS = Not assigned
Page 3 of 3
CONTACT POINTS
ORGANISATION LOCATION TELEPHONE
Aitken Freeman Pty. Ltd. 7/7-9 Brough St, (03) 9701 3955 Business Hours
SPRINGVALE. Vic 3171 (03) 9710 3955 After Hours
All information contained in this Data Sheet is as accurate and up to date as possible. No warranty expressed or implied is made as
to its accuracy, reliability or completeness.
N/A = Not applicable MSDS Pavecure W Edition 7鈥?.01/02/08
NAS = Not assigned
|