Emergency Number: (989) 496-3780
______________________________________________________________________
Section 1 Product Name and Information
______________________________________________________________________
Product (Trade Name and Synonyms): CP-4600 Series
Chemical Name: Polyalphaolefin
Chemical Family: Synthetic Hydrocarbon
Formula: C10nH20n+2
CAS#: Proprietary
______________________________________________________________________
Section 2 Components and Hazard Statement
______________________________________________________________________
This product is non-hazardous. The product contains no known carcinogens. No
special warning labels are required under OSHA 29 CFR 1910.1200.
______________________________________________________________________
Section 3 Safe Handling and Storage
______________________________________________________________________
Handling. Do not take internally. Avoid contact with skin, eyes, and clothing. Upon contact
with skin, wash with soap and water. Flush eyes with water for 15 minutes and consult
physician. Wash contaminated clothing before reuse.
Storage. Keep container tightly sealed when not in use.
page 1
______________________________________________________________________
Section 4 Physical Data
______________________________________________________________________
Appearance: Clear liquid, yellow to light brown tint
Boiling Point:>300掳F
Vapor Pressure: <0.01mmHg @ 20掳C
Specific Gravity (water=1):0.79-0.85
Volatiles, Percent by Volume: 0%
Odor: None
Solubility in Water: Insoluble
Evaporation Rate (butyl acetate=1): Nil
______________________________________________________________________
Section 5 Fire and Explosion Hazards
______________________________________________________________________
Flash Point (by Cleveland Open Cup): 425掳F
Flammable Limits: not established
Autoignition Temperature: no data
HMIS Ratings:
Health: 0
Flammability: 1
Reactivity: 0
NFPA Ratings: not established
Extinguishing Media: Dry chemical; CO2 foam; water spray (fog)
Unusual Fire and Explosion Hazards: None
Special Fire Fighting Techniques: Burning fluid may evolve irritating/noxious fumes.
Firefighters should use NIOSH/MNSA-approved self-contained breathing apparatus.
Use water to cool fire-exposed containers. Use water carefully near exposed liquid to avoid
frothing and splashing of hot liquid.
page 2
______________________________________________________________________
Section 6 Reactivity Data
______________________________________________________________________
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials: Strong oxidizers
Conditions to Avoid: Excessive heat
Hazardous Decomposition Products: Analogous compounds evolve carbon monoxide,
carbon dioxide, and other unidentified fragments when burned. See Section 5.
______________________________________________________________________
Section 7 Health Hazard Data
______________________________________________________________________
3
Threshold Limit Value: 5mg/m ACGIH
Situations to Avoid: Avoid breathing oil mists
First Aid Procedures:
Ingestion: Consult physician at once. DO NOT INDUCE VOMITING. May
cause nausea and diarrhea.
Inhalation: Product is not toxic by inhalation. If oil mist is inhaled, remove to
fresh air and consult physician.
To the best of our knowledge the toxicity of this product has not been fully
investigated. Analogous compounds are considered to be essentially non-toxic.
______________________________________________________________________
Section 8 Personal Protection Information
______________________________________________________________________
Respiratory Protection: Use in well ventilated area
Ventilation: Local exhaust
Protective Gloves: Not required, but recommended, especially for prolonged exposure.
Eye/Face Protection: Goggles
page 3
______________________________________________________________________
Section 9 Spill or Leak Procedures
______________________________________________________________________
In Case of Spill: Wear suitable protective equipment, especially goggles. Stop source of
spill. Dike spill area. Use absorbent materials to soak up fluid (i.e. sand, sawdust, and
commercially available materials). Wash spill area with large amounts of water. Properly
dispose of all materials.
______________________________________________________________________
Section 10 Waste Disposal Methods
______________________________________________________________________
Incinerate this product and all associated wastes in a licensed facility in accordance with
Federal, state, and local regulations.
The information in this material safety data sheet should be provided to all who use, handle,
store, transport, or are otherwise exposed to this product. CPI believes the information in
this document to be reliable and up to date as of the date of publication, but makes no
guarantee that it is.
8/02
page 4
|