Material
Safety
FOR CHEMICAL EMERGENCY SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT
CALL (CHEMTREC) 800-424-9300. THIS MSDS COMPLIES WITH 29 CFR 1919.1200
Data Sheet
(THE HAZARD COMMUNICATION STANDARD)
Section 1 - Chemical Product and Company Identi铿乧ation
Distributor Name: Alpha Professional Tools庐
Product / Chemical Name:
Address: 103 Bauer Drive, Oakland, NJ 07436
Sandpaper (Hook & Loop Backed) Emergency Tel. No.: 800-648-7229
Product Identi铿乧ation No: Rezgrip sheets and discs
Chemical Name: N/A
Chemical Family: N/A
Chemical Formula: N/A
Trade Name and Synonyms: Coated Abrasives
Material Use: Sanding
Molecualar Weight: N/A
Section 2 - Hazardous Ingredients of Material
Hazardous Ingredients Approximate C.A.S.N.A. or 鈥淓xposure Limits鈥? LD50/LC50
Concentration % U.N. Numbers Specify Species
and Route
Silico Carbide 10 - 30% As nuisance dust NE
10mg/m3
Cured Phenolic Resin 10 - 30% NE for solid resin
Section 3 - Physical Data for Material
Physical State: Solid
Evaporation Rate: NA
Odor and Appearance: White or brown abrasive paper
Boiling Point (0C): NA
backing.
Freezing Point (0C): NA
Odor Threshold (p.p.m.): NE
Solubility in Water (200C): NIL
Speci铿乧 Gravity: Greater than 1
% Volatile (By volume): NIL
Vapor Pressure (mm): NA
pH: NA
Vapor Density (Air=1): NA
Coef铿乧ient of Water/Oil Distribution: NA
Section 4 - Fire and Explosion Hazard of Material
Flammabiltiy: Yes Lower Explosion Limit (% by volume):
IF yes, under which conditions: Direct exposure to 铿乺e Hazardous Combustion Products: C.O. Gas from incom-
Extinguishing Media: Water - Co2 - Foam - Dry chemicals plete combustion.
Special Prodcedures: None Explosion Data Sensitivity to Mechanical Impact: NA
Flashpoint (0C) and Method: NA Rate of Burning: NE
Auto Ignition Temperature (0C): 2500C Explosive Power: None
Upper Explosion Limit (% by volume): NA Sensitivity to Static Discharge: None
Section 5 - Reactivity Data (NIL)
Copyright 漏 2002 Alpha Professional Tools. All rights reserved.
Chemical Stability: ___Yes ___No Reactivity and Under What Condition: Abrasive grain
IF no, under which conditions?: will not burn. Adhesive will char. Baking is combustible.
Compatibility to other substances: ___Yes ___No Hazardous Decomposition Products:
If so, which ones?:
Doc# 500 - Revised 08/08
103 Bauer Drive, Oakland, NJ 07436 鈥? 800-648-7229 鈥? Fax: 800-286-0114 www.alpha-tools.com
Section 6 - Toxicological Properties of Products
LC50 of Product (Specify Species): NE
Route of Entry: Skin, Eye contact, Inhalation acute, Inhalation
Sensitization to Product: NE
chronic.
Synergistic Materials: NE
Effects of Acute Exposure to Product: Abrasive dust may
Carcinogenicity:
irritate eyes. Inhalation may cause coughing. Skin contact
Reproductive Effects:
may cause physical abrasion.
Teratogenicity:
Effects of Chronic Exposure to Product: Inhalation may
Mutagenicity:
affect breathing capacity.
LD50 of Product (Specify Species and Route): NE
Irritancy of Product: NE
Exposure Limits of Product: NE
Section 7 - Preventive Measures
Personal Protective Equipment: Long sleeves to minimize Handling Procedures & Equipment: No special
contact with dust particles. requirements.
Storage Requirements: Recommend 400F to 900F
Gloves (Specify): Leather
Footwear (Specify): Regular 40% to 70% relative humidity.
Engineering Controls (E.G. ventilation, enclosed process, Special Shipping Information:
specify): Recommend local ventilation to prevent dust Respiratory (Specify): Dust mask (see below)
inhalation and keep dust below TLV. Eye (Specify): Safety glasses
Leak & Spill Procedure: No special precautions Clothing (Specify): Regular
Waste Disposal: Normal disposal containers or by
incineration.
Section 8 - First Aid Measures
Ingestion: No known adverse effects.
Skin: May cause abrasion or skin irritation (See doctor for
General Advise: Highly recommend that opera-
serious abrasions)
tors use industrial approved dust masks.
Eye: See doctor for removal of any grain or dust particles.
Inhalation: Remove victim to fresh air location: apply arti铿乧ial
respiration as needed.
Note: NA = Not Available, NE = Not Established.
Doc# 500 - Revised 08/08
103 Bauer Drive, Oakland, NJ 07436 鈥? 800-648-7229 鈥? Fax: 800-286-0114 www.alpha-tools.com
|