MATERIAL SAFETY DATA SHEET
EMERGENCY NUMBER: 989-496-3780
SECTION 1 PRODUCT NAME & INFORMATION
Product (Trade Name and Synonyms): Sullair Flushing Fluid (Part Number 250029-015)
Chemical Name: Ester
Chemical Family: Diester
Formula: Proprietary
CAS #: Proprietary
SECTION 2 COMPONENTS & HAZARD STATEMENT
This product is non-hazardous. The product contains no known carcinogens. No special warning labels are required
under OSHA 29 CFR 1910.1200.
SECTION 3 SAFE HANDLING & STORAGE
HANDLING: Do not take internally. Avoid contact with skin, eyes, and clothing. Upon contact with skin, wash
with soap and water. Flush eyes with water for 15 minutes and consult physician. Wash contaminated clothing
before reuse.
STORAGE: Keep container tightly sealed when not in use.
SECTION 4 PHYSICAL DATA
Appearance: Clear liquid, light brown to amber tint
Boiling Point: >700掳F
Vapor Pressure: <0.01mmHg @ 20掳C
Specific Gravity (water=1): 0.94-0.97
Volatiles, Percent by Volume: 0%
Odor: Mild, distinct
Solubility in Water: Negligible
Evaporation Rate (butyl acetate=1): Nil
Page 1
Product: Sullair Flushing Fluid
SECTION 5 FIRE & EXPLOSION HAZARDS
掳
Flash Point (by Cleveland Open Cup): 444掳F
Flammable Limits: Not established
Autoignition Temperature: No data
HMIS Ratings:
Health 0
Flammability 1
Reactivity 0
NFPA Ratings: Not established
Extinguishing Media: Dry Chemical; CO2 Foam; Water Fog (see below)
Unusual Fire and Explosion Hazards: None
Special Fire Fighting Techniques: Burning fluid may evolve irritating/noxious fumes. Firefighters should use
NIOSH/MNSA-approved self-contained breathing apparatus. Use water fog to cool fire-exposed containers. USE
WATER CAREFULLY NEAR EXPOSED/BURNING LIQUIDS. May cause frothing and splashing of hot material.
SECTION 6 REACTIVITY DATA
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials: Strong oxidizers; caustic or acidic solutions
Conditions to Avoid: Excessive heat
Hazardous Decomposition Products: Analogous compounds evolve carbon monoxide, carbon dioxide, and other
unidentified fragments when burned. See Section 5.
SECTION 7 HEALTH HAZARD DATA
Threshold Limit Value: Not established
Situations to Avoid: Avoid breathing oil mists
First Aid Procedures:
Ingestion 鈥? Consult physician at once. May cause nausea and diarrhea.
Inhalation 鈥? Product is not toxic by inhalation. If oil mist is inhaled, remove to fresh air and consult physician.
To the best of our knowledge, the toxicity of this product has not been fully investigated. Analogous
compounds are considered to be essentially non-toxic.
SECTION 8 PERSONAL PROTECTION INFORMATION
Respiratory Protection: Use in well ventilated area
Ventilation: Local exhaust
Protective Gloves: Not required, but recommended, especially for prolonged exposure.
Eye/Face Protection: Goggles
Page 2
Product: Sullair Flushing Fluid
SECTION 9 SPILL OR LEAK PROCEDURES
In Case of Spill: Wear suitable protective equipment, especially goggles. Stop source of spill. Dike spill area.
Use absorbent materials to soak up fluid (i.e. sand, sawdust, and commercially available materials). Wash spill area
with large amounts of water. Properly dispose of all materials.
SECTION 10 WASTE DISPOSAL METHODS
Incinerate this product and all associated wastes in a licensed facility in accordance with Federal, State, and
Local Regulations.
The information in the Material Safety Data Sheet should be provided to all who use, handle, store, transport, or are
otherwise exposed to this product. CPI believes the information in this document to be reliable and up to date of
publication, but makes no guarantee that it is.
Page 3
|