MATERIAL SAFETY DATA SHEET
Product Name:
Naphtha (LSR) (3601)
SECTION 1 鈥? PRODUCT IDENTIFICATION AND USE
Product name PIN #, UN #
Light Straight Run (LSR) Naphtha 1268
Chemical name TDG, DOT class
Petroleum distillates Class 3
Common Packing group
High flash naphtha. Ligroin. Mineral spirits I, ll, or lll, depending on
names
and synonyms . VM&P Naphtha. Shipping method.
Product use Refinery intermediate Shipping name Petroleum distillates, N.O.S.;
or Petroleum Products, N.O.S.
WHMIS Flammable liquid Class B Division 3
classification Toxic Class D Division 2 Subdivision B
Health 4 if S-containing; 1, otherwise HMIS Health 4 if S-containing; 1, otherwise
Hazard codes NFPA
Flammability 4 Flammability 4
Reactivity 0 Reactivity 0
NFPA & HMIS Ratings: 0=Insignificant/No Hazard. 1=Slight Hazard. 2=Moderate Hazard. 3=High/Serious Hazard. 4=Extreme/Severe
Irving Oil Limited, Refining Division (506) 202-2000
Supplier Phone
Emergency
Box 1260, Saint John 1-800-424-9300
(Chemtrec)
New Brunswick Canada E2L 4H6 (506) 202-3000
Refinery
SECTION 2 鈥? HAZARDOUS INGREDIENTS
Ingredients CAS# Wt (%) ACGIH-TLVs OSHA PELs NIOSH RELs LD50 LC50
(2004) (2004) (general industry) (2004) (rat, oral) (rat, 4 hr)
400 mg/m3 TWA
Petroleum distillates 8030-30-6 100 400 ppm TWA 100 ppm TWA >5 g/kg NAv
(Naphtha) (100 ppm)
May also contain:
Sulphur (S) 7704-34-9 Varied NAv NAv NAv >8.4 mg/kg NAv
Which may result in the evolution of:
Hydrogen sulphide (H2S) 7783-04-6 NAp 10 ppm TWA 20 ppm CEILING 10 ppm CEILING NAp 444 ppm
15 ppm STEL
Light Straight Run Naphtha is a complex mixture of C5 to C13 paraffinic hydrocarbons. It may include a small concentration of aromatics.
SECTION 3 鈥? PHYSICAL DATA
Form. Colour Vapour
Clear, non-viscous liquid 362 to 775 mm Hg
Odour Evaporation rate
Rotten eggs if S present; kerosene-like if S-free NAv
Specific gravity
Note: H2S deadens the sense of smell. Absence of rotten 0.66 to 0.69 (60掳F)
Vapour density
egg smell does not mean absence of H 2S. NAv
Odour Boiling point
<0.15 ppm for H 2S; Not available for sulphur-free product 24 to 49掳C (75 - 120掳F)
PH Freezing point
NAp NAv
Coefficient of water/oil NAv
SECTION 4 鈥? FIRE AND EXPLOSION HAZARDS
Condition
Yes No Easily ignited by heat, sparks or flames.
Flammability
Flash point Auto ignition
Approximately -7掳C (20掳F) (cc) NAv
Lower flammable Upper flammable limit
~0.9% ~6%
Explosion data: Sensitivity to: Mechanical impact Not expected to be sensitive Static discharge Yes
Means of extinctionIn general, do not extinguish fire unless flow can be stopped. Use carbon dioxide, dry chemical, or
foam. Cool containers with flooding quantities of water until well after the fire is out.
Special precautions Vapour is heavier than air. It will spread along the ground & collect in low or confined areas (sewers,
basements). Also travels to source of ignition and flashes back. Containers may explode when
Hazardous combustion Carbon monoxide (CO). Nitrogen oxides (NOx). Aromatic hydrocarbons. H 2S and
products sulphur dioxide (SO2) if product contains sulphur.
SECTION 5 鈥? REACTIVITY INFORMATION
Stability Stable
Conditions to avoid Sources of ignition. Static discharges. High temperatures.
Incompatible substances Oxidizers such as peroxides, nitric acid, and perchlorates.
Hazardous decomposition CO. NOx. Aromatic hydrocarbons. H 2S and SO2 if product contains sulphur.
products
The information contained in this form is based on data from sources considered to be reliable but Irving Oil Limited does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil Limited expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil Limited
Page 1 of 2
MATERIAL SAFETY DATA SHEET
Product Name:
Naphtha (LSR) (3601)
SECTION 6 鈥? HEALTH HAZARD INFORMATION
Route of Entry Eye Hazardous Contact Eye
Skin absorption Skin
Inhalation
Ingestion
Acute exposure Headache, nausea, dizziness and other symptoms of central nervous system (CNS) depression.
Aspiration into the lungs can cause severe pneumonitis (serious lung irritation), with coughing, gagging,
shortness of breath, chest pain, and/or pulmonary edema (swelling and fluid accumulation).
H2S is very toxic. At concentrations as low as 1 to 5 ppm, nausea and severe eye irritation may occur.
Sense of smell may be impaired at about 20 ppm, with headache and res piratory tract lung irritation. At
250 to 500 ppm, potentially fatal pulmonary edema (fluid in the lungs) may occur. Dizziness, sudden
(often fatal) collapse, unconsciousness, and death occur at higher concentrations. Note: Pulmonary
edema may be delayed a s long as 48 hours after exposure.
Chronic Specific information is not available. However, the following is expected, as for gasoline: Peripheral &
exposure CNS damage, such as tremors, hallucinations, memory loss, & impaired mental capacity. Damage to
kidneys and blood-producing system. Prolonged skin contact may cause dermatitis. Fatigue, and
severe nervous and respiratory system symptoms may follow survival of H 2S poisoning.
Carcinogenicity Not classified by ACGIH, EPA, NTP, NIOSH, or Teratogenicity Not available
Reproductive Not available
OSHA, as to carcinogenicity. IARC lists stoddard
solvent (a closely-related product) as unclassifiable. Sensitization No
Mutagenicity Irritancy
Not known to be mutagenic No
Toxicologically synergistic Other CNS depressants are expected to produce additive or synergistic effects.
SECTION 7 鈥? FIRST AID
Do not attempt rescue of an H 2S knockdown victim without the use of proper respiratory protective equipment.
Inhalation Move victim to fresh air Give artificial respiration if breathing has stopped and if a qualified AR administrator is
available. Apply CPR if both pulse and breathing have stopped. Obtain medical attention immediately.
Ingestion Never give anything by mouth if the person is unconscious, rapidly losing consciousness, or convulsing. If the
person is conscious, have them drink 8 to 10 ounces of water or milk to dilute the material in the stomach.
Do not induce vomiting. If vomiting occurs spontaneously, have the person lean forward to avoid aspiration.
Obtain medical attention immediately.
Eye Flush eye with lukewarm, gently flowing fresh water for at least 10 minutes. Obtain medical attention.
Skin Quickly and gently blot away excess chemical. Remove and isolate contaminated clothing and shoes. Flush
skin with water for at least 10 minutes. Wash gently and thoroughly with water and non-abrasive soap. Obtain
medical assistance.
SECTION 8 鈥? PRECAUTIONARY MEASURES
Personal Gloves Nitrile or Viton鈩? preferred.
protective Eye Chemical safety goggle or face shield, as a good general safety practice.
equipmen Respiratory NIOSH-approved. A qualified OHS professional should advise on respirator selection. SCBA or air
line respirator with escape cylinder for confined spaces or work with S-containing product.. If an
t
air-purifying respirator is appropriate, use a 鈥淧 series鈥? filter & organic vapour cartridges.
Clothing & Coveralls to prevent skin contact. If clothing or footwear is contaminated with product, remove it
footwear immediately & completely decontaminate it before re-use, or discard it as flammable waste.
Engineering Enclose processes. Use local exhaust ventilation to remove vapour at its site of generation. Handle
controls laboratory samples in a fu me hood. Use mechanical ventilation in confined spaces.
Handling Avoid heating open containers of product so as to minimize vapour production and accumulation. Use
procedures & non-sparking equipment, explosion-proof ventilation, and intrinsically safe electrical equipment. Ground
equipment handling equipment. Have clean emergency eyewash and shower readily available in the work area.
Leak & spill Keep unauthorized persons away. Eliminate all sources of ignition. Ventilate area. Stop leak if it can be
Procedure done safely. Prevent entry into sewers, waterways, or confined spaces. Vapour-suppressing foam may
be used to reduce vapour. Absorb or cover with dry earth, sand or other non-combustible material and
use clean, non-sparking tools to transfer to container.
Waste Consult local authorities for advice.
Storage May be stored at ambient temperatures. Containers should be vented and equipped with a flame
Shipping Stable during transport.
SECTION 9 鈥? PREPARATION DATE OF MSDS
Prepared by Phone
Irving Oil Limited, Refining Division (506) 202-3000
Revision date To re-order MSDS,
July 28, 2005 (506) 202-2000
The information contained in this form is based on data from sources considered to be reliable but Irving Oil Limited does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil Limited expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil Limited
Page 2 of 2
|