MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
Anderol UBS
Product Name:
Lubricant
Product Class:
Class A3 - Carcinogenic
WHMIS Classification:
Class B-5 - Flammable Aerosol
Class D-2B 鈥? Material causing other toxic
effects (Toxic)
Irving Oil (506) 632-2000
Supplier Name and Address: Phone:
10 Sydney Street (506) 648-3060
Emergency:
Saint John, N.B.
E2L 4K1
SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIALS
Hazardous Ingredients CAS# wt% ACGIH-TLV LD50
Propane 74-98-6 10-30 1000 ppm
3
Kerosene (petroleum) 8008-20-6 10-30 200 mg/m Oral (Rabbit)
2835 mg/kg
Isobutane 75-28-5 5-10 1000 ppm
1 3
Tris(dipentyldithiocarbamato-s,s ) antimony 15890-25-2 1-5 0,5 mg/m
SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES
Liquid (Aerosol) 0.88 (Water=1)
Form: Specific Gravity:
o o
Black Open cup: -27 C (-16.6 F) (Cleveland)
Colour: Flash Point:
Petroleum
Odour:
SECTION 4 - FIRE AND EXPLOSION HAZARD
Flammable
Flammability of the product:
The final products of combustion are carbon oxides and water. Nitrogen, sulphur
and metal oxides may also be produced in some case.
Use dry chemical, carbon dioxide, water spray (fog) or foam.
Extinguishing media Suitable:
Extremely flammable liquid and vapour. Vapor may cause flash fire. Vapors may accumulate in
Special exposure hazards:
low or confined areas or travel a considerable distance to a source of ignition and flash back.
Runoff to sewer may create fire or explosion hazard.
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus
Special protective equipment for
(SCBA) with a full face-piece operated in positive pressure mode.
fire-fighters:
SECTION 5 - REACTIVITY DATA
This product is stable.
Stability:
None known.
Conditions of instability:
Reactive with oxidizing materials and acids
Incompatibility with various substances:
Will not occur.
Hazardous polymerization:
None known.
Conditions of reactivity:
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
anderol_ubs english.DOC
Page 1 of 3
MATERIAL SAFETY DATA SHEET
SECTION 6 - TOXICOLOGICAL PROPERTIES
Acute Effects
Irritating to eyes
Eyes:
Irritating to skin
Skin:
Harmful by inhalation
Inhalation:
Harmful if swallowed
Ingestion:
Carcinogenic effects Classified A3 (proven for animals) by ACGIH [Kerosene (petroleum)]. Classified
Potential chronic health
None by NIOSH [Isobutane].
effects:
Mutagenic effects Not available.
Teratogenic effects Not available
Contains material which causes damage to the following organs: the nervous system, upper respiratory
Target organs:
tract, skin, central nervous system (CNS), eye, lens or comea.
SECTION 7 - PREVENTATIVE AND CORRECTIVE MEASURES
Personal Protective Equipment:
Safety glasses with side shields
Eye Protection:
Not applicable
Skin Protection/Body:
Not applicable
Respiratory Protection:
Natural rubber (latex)
Hand Protection:
Use only with adequate ventilation. If user operations generate dust, fumes, vapour or mist, use
Engineering Measures:
process enclosures, loca exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits. The engineering controls also need
to keep gas, vapour or dust concentrations below any lower explosive limits. Use explosion-proof
ventilation equipment.
If emergency personnel are unavailable, contain spilled material. For small spills, add absorbent (soil
Methods of Cleaning Up:
may be used in the absence of other suitable materials) and use a non-sparking or explosion-proof
means to transfer material to a sealable, appropriate container for disposal. For large spills, dike
spilled material or otherwise contain material to ensure runoff does not reach a waterway. Place
spilled material in an appropriate container for disposal.
Avoid dispersal of spilled material, runoff and contact with soil, waterways, drains and sewers.
Environmental Precautions:
Immediately contact emergency personnel. Eliminate all ignition sources. Keep unnecessary
Personal Precautions:
personnel away. Use suitable protective equipment. Do not touch or walk through spilled material.
The generation of waste should be avoided or minimized wherever possible. Avoid dispersal of spilled
Waste Disposal:
material, runoff and contact with soil, waterways, drains and sewers. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of environmental protection and
waste disposal legislation and any regional and local authority requirements.
Storage & Handling
Requirements:
Avoid contact with eyes, skin and clothing. Keep container closed. Use only with adequate ventilation.
Handling:
Keep away from heat, sparks and flame. To avoid fire or explosion, dissipate static electricity during
transfer by grounding and bonding containers and equipment before transferring material. Use
explosion-proof electrical (ventilating, lighting and material handling) equipment.
Store in a segregated and approved area. Keep container in a cool, well-ventilated area. Keep
Storage:
container tightly closed and sealed until ready for use. Avoid all possible sources of ignition (spark or
flame).
Special Shipping Information:
Regulatory Information Proper Shipping Name Class UN Number
UN/IMDG/IATA Classification AEROSOLS, FLAMMABLE, 2.1 UN1950
N.O.S. (each not exceeding 1 L
capacity) (Propane, Isobutane)
DOT Classification AEROSOLS, FLAMMABLE, 2.1 UN1950
N.O.S. (each not exceeding 1 L
capacity) (Propane, Isobutane)
TDG Classification AEROSOLS, FLAMMABLE, 2.1 UN1950
N.O.S. (each not exceeding 1 L
capacity) (Propane, Isobutane)
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
anderol_ubs english.DOC
Page 2 of 3
MATERIAL SAFETY DATA SHEET
SECTION 8 - FIRST AID MEASURES
Check for and remove any contact lenses. In case of contact, immediately flush skin with plenty of water for at least 20
Eye Contact:
minutes while removing contaminated clothing and shoes. Get medical attention if irritation occurs.
Wash with soap and water. Get medical attention if irritation occurs.
Skin Contact:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms appear.
Inhalation:
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention if symptoms
Ingestion:
appear.
Not available
Notes to Physician:
No action shall be taken involving any personal risk or without suitable training.
Protection of
first-aiders:
SECTION 9 - PREPARATION DATE OF MSDS
Irving Lubricants (506) 632-7000
MSDS Prepared by: Phone:
MSDS Date: April 12, 2007
Revision 03
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
anderol_ubs english.DOC
Page 3 of 3
|