MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
Form Oil
Product Name:
Release Agent.
Product Class:
Class B3 - Combustible Liquids
WHMIS Classification:
Irving Oil (506) 632-2000
Supplier Name and Address: Phone:
10 Sydney Street (506) 648-3060
Emergency:
Saint John, NB
E2L 4K1
SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIALS
Hazardous Ingredients CAS# wt% ACGIH-TLV LC50 LD50
3
Stoddard solvent 8052-41-3 15-40 > 5 g/m rat > 5 g/kg oral rat
Light distillate-Hydrotreated 64742-47-8 7-13 > 5 g/kg oral rat
> 3 g/kg skin rabbit
SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES
o
Liquid. 3.2 cSt
Form: Viscosity @ 40 C:
Amber
Colour:
Mild petroleum odour.
Odour:
o
0.87
Specific Gravity @ 15 C:
Negligible.
Solubility in Water:
o
199 C
Boiling Point:
SECTION 4 - FIRE AND EXPLOSION HAZARD
Flammability: 鈱es At or above flashpoint.
No Conditions:
o
Flash Point : 102 C (COC)
Not determined. Not determined.
Upper Flammable Limit: Lower Flammable Limit:
Not determined.
Auto Ignition Temperature: TDG Flammability Classification:
Not available. Not determined.
Sensitivity to Impact: Sensitivity to Static Discharge:
Foam, dry chemical or water spray.
Means of Extinction:
Fumes, smoke and carbon monoxide.
Hazardous Combustion Products:
Use water to cool fire exposed containers. Use self-contained breathing apparatus for fighting
Special Procedures:
fires.
SECTION 5 - REACTIVITY DATA
This product is stable.
Stability:
Will not occur.
Hazardous Polymerisation:
Temperatures at or above flashpoint.
Conditions to avoid:
Strong oxidising agents.
Incompatibility with other substances:
None.
Hazardous decomposition products:
SECTION 6 - TOXICOLOGICAL PROPERTIES
鈱ye 鈱? Skin Contact 鈱? Inhalation 鈱? Ingestion
Route of Entry: Skin Absorption
High vapour concentrations (greater than 1000 ppm) are irritating to eyes and respiratory tract, and may
Effects of Acute Exposure:
cause headaches, dizziness, anaesthesia, drowsiness, unconsciousness, and other central nervous
system effects, including death. Small amounts of liquid aspirated into the respiratory system during
ingestion or from vomiting may cause mild to severe pulmonary injury and possibly death. Slightly
irritating to eyes , but will not injure eye tissue. Low toxicity.
Frequent or prolonged skin contact may irritate, cause skin rash or aggravate an existing dermatitis
Effects of Chronic Exposure:
condition.
3
5 mg/m Oil mist Not determined.
Exposure Limits: Carcinogenicity:
Not determined. Not determined.
Reproductive Toxicity: Teratogenicity:
Slight to eyes and skin. Not determined.
Irritancy of Product: Mutagenicity:
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
form oil.DOC
Page 1 of 2
MATERIAL SAFETY DATA SHEET
SECTION 7 - PREVENTATIVE AND CORRECTIVE MEASURES
Gloves: Oil/Chemical resistant.
Personal Protective Equipment:
Eye: Chemical safety glasses or full face shield.
Respiratory: NOISH respirator if exposure limits are exceeded.
Footwear: No special requirements under normal conditions.
Clothing: No special requirements under normal conditions.
Other:
Local exhaust at source of vapours.
Engineering Controls:
Contain spills with dikes or absorbent material. Eliminate fire hazards. Prevent from entering sewers
Leak and Spill Procedure:
or water courses. Pick up free liquid for recycle and/or disposal. Absorb residual liquid and transfer
absorbed material into containers.
Follow local and governmental regulations.
Waste Disposal:
Cool, dry location. Keep containers closed. Do not weld, heat, drill or apply pressure to containers.
Storage Requirements
Special Shipping Information:
SECTION 8 - FIRST AID MEASURES
Remove to fresh air or give artificial respiration. If breathing is difficult, give oxygen and seek medical attention.
Inhalation:
Do not induce vomiting, give two glasses of water or milk and seek medical attention.
Ingestion:
Flush with water for 15 minutes.
Eye:
Wash contaminated area with soap and water. Clean contaminated clothing before wearing again.
Skin:
General Advice:
SECTION 9 - PREPARATION DATE OF MSDS
Irving Lubricants (506) 632-7000
MSDS Prepared by: Phone:
MSDS Date: February 14, 2007
Revision 02
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
form oil.DOC
Page 2 of 2
|