MATERIAL SAFETY DATA SHEET
SECTION 1 - PRODUCT IDENTIFICATION AND USE
2 Cycle +
Product Name:
Ashless two stroke engine oil/lubricant.
Product Class:
Class B3 Combustible Liquid
WHMIS Classification:
Class D2B Other toxic effects - Skin Irritant
Irving Oil Limited 1-800-irving1 (1-800-478-4641)
Supplier Name and Address: Phone:
10 Sydney Street (506) 648-3060
Emergency:
Saint John, N.B.
E2L 4K1
SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIALS
Hazardous Ingredients CAS# wt% ACGIH-TLV LC50 LD50
Petroleum Solvent 64742-88-7 20-30% 100 ppm, 525 Rat: Inhalation > Rat: Oral > 8.0 ml/kg
3 3
mg/m 13100 mg/m 4 Dermal > 4.0 ml/kg
hours
SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES
Liquid
Form:
Dark Blue-Green
Colour:
Petroleum
Odour:
o o
0.86
Specific Gravity @ 15 C(60 F)
Insoluble
Solubility in Water:
o
> 284 > 544
Boiling Point ( C) (F) :
SECTION 4 - FIRE AND EXPLOSION HAZARD
Flammability: 鈱es Open flame or other sources of ignition.
No Conditions:
o o
Flash Point : 106 C (223 F) (COC)
Not determined. Not determined.
Upper Flammable Limit: Lower Flammable Limit:
Not available. Not classified.
Auto Ignition Temperature: TDG Flammability Classification:
None. None.
Sensitivity to Impact: Sensitivity to Static Discharge:
Water fog, Carbon dioxide, dry chemical, foam.
Means of Extinction:
Carbon monoxide and carbon dioxide.
Hazardous Combustion Products:
Wear self-contained breathing apparatus when fighting fire. Use water to cool fire-exposed
Special Procedures:
containers. Combustible - exclude air. Product will float and can be re-ignited on surface of water.
SECTION 5 - REACTIVITY DATA
This product is stable.
Stability:
Will not occur.
Hazardous Polymerisation:
Excessive heat or open flame.
Conditions to avoid:
Strong oxidising agents.
Incompatibility with other substances:
Thermal decomposition from high temperature or combustion will produce hydrogen sulphide
Hazardous decomposition products:
and oxides of carbon, nitrogen, and sulphur.
SECTION 6 - TOXICOLOGICAL PROPERTIES
鈱ye 鈱kin Contact 鈱? Inhalation 鈱? Ingestion
Route of Entry: Skin Absorption
May cause irritation to skin and eyes. Prolonged exposure or excessive inhalation of vapours may cause
Effects of Acute Exposure:
headache, nausea, vomiting, dizziness and central nervous system depression. In rare cases may
sensitise heart muscle causing heart arrhythmia.
Prolonged and repeated contact with skin can cause defatting and drying of the skin resulting in irritation
Effects of Chronic Exposure:
and dermatitis.
3
5 mg/m Not established.
Exposure Limits: Carcinogenicity:
Not established. Not established.
Reproductive Toxicity: Teratogenicity:
Skin and eye irritant. Not established.
Irritancy of Product: Mutagenicity:
The information contained in this form is based on data from sources considered to be reliable but Irving Oil Limited does not guarantee the accuracy or completeness thereof. The
information is provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including
consequential loss or for injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
Limited.
2_cycle.DOC
Page 1 of 2
MATERIAL SAFETY DATA SHEET
SECTION 7 - PREVENTATIVE AND CORRECTIVE MEASURES
Gloves: Impervious (viton, nitrile) should be worn when handling this material.
Personal Protective Equipment:
Eye: Chemical safety glasses or full face shield.
Respiratory: An approved respirator is advised, if exposed to levels greater than the
exposure limit. Use either an atmosphere-supplying respirator or an air-
purifying respirator for organic vapours. Proper equipment for high
concentrations includes an atmosphere supplied, positive pressure demand,
self-contained or airline breathing apparatus.
Footwear: Oil/Chemical resistant.
Clothing: In confined spaces where risk of skin exposure is much higher, impervious
clothing should be worn.
Other:
Mechanical ventilation is recommended for all indoor situations to control fugitive emissions. Electrical
Engineering Controls:
and mechanical equipment should be explosion-proof.
Eliminate all sources of ignition, ground handling equipment. Avoid direct contact with material.
Leak and Spill Procedure:
Prevent spill from entering sewers or water courses. Contain and absorb with sand or inert material.
Remove and dispose of contaminated materials.
Consult local authorities.
Waste Disposal:
Keep container closed, in a cool, dry area.
Storage Requirements:
Special Shipping Information:
SECTION 8 - FIRST AID MEASURES
If affected, remove to fresh air immediately. If breathing has stopped administer artificial respiration, seek medical
Inhalation:
attention.
Do not induce vomiting, seek medical attention. Guard against aspiration into lungs by having the individual turn on to
Ingestion:
their left side. If spontaneous vomiting occurs keep head below hips to prevent aspiration of liquid into lungs.
Flush with water for 15 minutes, seek medical attention.
Eye:
Clean area exposed with soap and water. Remove contaminated clothing. If irritation occurs, seek medical attention.
Skin:
Notes to Physician: The main hazard following accidental ingestion is aspiration of the liquid into the lungs producing
General Advice:
chemical pneumonitis. Cardiac arrythmias have been reported with solvent exposure. If more than 2.0 ml/kg has been
ingested, vomiting should be induced with supervision. If the symptoms such as loss of gag reflex, convulsions or
unconsciousness occur before vomiting, gastric lavage with a cuffed endotracheal tube should be considered.
SECTION 9 - PREPARATION DATE OF MSDS
Irving Lubricants (506) 632-7000
MSDS Prepared by: Phone:
MSDS Date: February 14, 2007
Revision 02
The information contained in this form is based on data from sources considered to be reliable but Irving Oil Limited does not guarantee the accuracy or completeness thereof. The
information is provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including
consequential loss or for injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
Limited.
2_cycle.DOC
Page 2 of 2
|