SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES
Semi-solid paste >1
Form: Vapour Density (Air=1):
-5 -2
o
Grey/Black to Amber ~ 1 x 10 to 2 x 10
Colour: Vapour Pressure(mmHg@25 C):
Mild soap Negligible
Odour: % Volatiles by Volume:
o
Not determined
Specific Gravity @ 15 C: Evaporation Rate(n-butyl
<1
acetate=1):
Negligible
Solubility in Water:
o
~ 270 - 427
Boiling Point ( C):
SECTION 4 - FIRE AND EXPLOSION HAZARD
Flammability: 鈱es Open flame above flash point.
No Conditions:
o
Flash Point : ~ 128 - 269 C (COC)
Not determined. Not determined.
Upper Flammable Limit: Lower Flammable Limit:
Not applicable. Not classified.
Auto Ignition Temperature: TDG Flammability Classification:
Not applicable. Not applicable.
Sensitivity to Impact: Sensitivity to Static Discharge:
Water fog, Carbon dioxide, dry chemical, foam, earth or sand. Water may cause frothing.
Means of Extinction:
Carbon monoxide and carbon dioxide.
Hazardous Combustion Products:
Wear self-contained breathing apparatus when fighting fire. Use water to cool fire-exposed
Special Procedures:
containers.
SECTION 5 - REACTIVITY DATA
This product is stable.
Stability:
Will not occur.
Hazardous Polymerisation:
Excessive heat or open flame.
Conditions to avoid:
Strong oxidants, acids and caustics.
Incompatibility with other substances:
Not determined.
Hazardous decomposition products:
Irritation to skin and eyes.
Effects of Acute Exposure:
Not determined.
Effects of Chronic Exposure:
Not determined. Not determined.
Exposure Limits: Carcinogenicity:
Not determined. Not determined.
Reproductive Toxicity: Teratogenicity:
Slight. Not determined.
Irritancy of Product: Mutagenicity:
SECTION 7 - PREVENTATIVE AND CORRECTIVE MEASURES
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information
is provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
af_tmg.DOC
Page 1 of 2
MATERIAL SAFETY DATA SHEET
Gloves: Oil/Chemical resistant.
Personal Protective Equipment:
Eye: Chemical safety glasses or full face shield.
Respiratory: None normally required.
Footwear: None normally required.
Clothing: None normally required.
Other:
None normally required.
Engineering Controls:
Absorb with sand or inert material. Sweep or scoop to remove.
Leak and Spill Procedure:
Consult local authorities.
Waste Disposal:
o
Keep container closed, in a cool, dry area. Store below 65 C.
Storage Requirements
None.
Special Shipping Information:
SECTION 8 - FIRST AID MEASURES
Not applicable.
Inhalation:
Do not induce vomiting, seek medical attention.
Ingestion:
Flush with water for 15 minutes.
Eye:
Clean area exposed with soap and water.
Skin:
General Advice:
SECTION 9 - PREPARATION DATE OF MSDS
Irving Lubricants (506) 632-7000
MSDS Prepared by: Phone:
MSDS Date: February 17,2005
Revision 01
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information
is provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
af_tmg.DOC
Page 2 of 2
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP