Zep Manufacturing Co. of Canada
Material Safety Data Sheet
11627 178th Street
Edmonton, Alberta T5S 1N6
1-800-I-BUY-ZEP
and Safe Handling and Disposal Information
v0:52tq:8a6Chemical Product and Company Identification
Product name LUBRISIL
Aerosol Lubricant
Product Use
Product Code 0058
Date of issue Supersedes 01/06/03
10/04/05
Emergency For MSDS Information:
Telephone Technical Services Group
Zep Manufacturing of Canada
Numbers
Telephone: (780) 453-8100 (Business Hours 8:00-5:00)
For a Medical or Transportation Emergency:
CANUTEC (24 Hours)
(613) 996-6666 - Call Collect
Prepared by Technical Services Group
Zep Manufacturing Co. of Canada
11627 178th Street
Edmonton, Alberta T5S 1N6
Printing date: 04/10/05
Date of Preparation : 10/04/05
Section 2. Composition, Information on Ingredients
Name of Hazardous Ingredients CAS # % by Weight Toxicity Data
TRICHLOROETHYLENE; acetylene trichloride; 1-chloro-2,2- 79-01-6 60 - 100 LD50 Rat Oral 4920 mg/kg
dichloroethylene LD50 Mouse Oral 2402 mg/kg
LD50 Rabbit Dermal 29800 mg/kg
LC50 Mouse Inhalation 12500 ppm (4
hour(s))
BLEND OF ISOBUTANE & PROPANE 74-98-6; 75-28-5 10 - 30 Not Not Not Not available.
available. available. available.
Section 3. Hazards Identification
Routes of Entry Absorbed through skin. Inhalation.
Acute Effects
Hazardous in case of skin contact (irritant, permeator). Non-sensitizer for skin. Skin inflammation is characterized
Skin
by itching, scaling, reddening, or, occasionally, blistering.
Hazardous in case of eye contact (irritant). Liquid in eye may cause irritation with possible damage if not rinsed
Eyes
immediately.
Inhalation Hazardous in case of inhalation (lung irritant). Can cause central nervous system depression. Inhalation of
vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness, and nausea, and
may lead to unconsciousness or death. Prolonged repeated exposure may cause chemical pneumontitis. Medical
Conditions Aggravated by Overexposure: Respiratory, Heart (Cardiac).
Ingestion Aspiration hazard if swallowed- can enter lungs and cause damage.
The substance may be toxic to kidneys, liver, central nervous system (CNS), and heart. Repeated or
Chronic Effects
prolonged exposure to the substance can produce target organs damage. Defatting to the skin.
Prolonged skin contact may cause dermatitis with drying and cracking of skin.
Additional information : See Toxicological Information (section 11)
Section 4. First Aid Measures
Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get
Eye Contact
medical attention.
Skin Contact Wash affected area with soap or mild detergent and water. Remove contaminated clothing and shoes. Get
medical attention if irritation develops.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
Inhalation
oxygen. Get medical attention.
Aspiration hazard if swallowed- can enter lungs and cause damage. Do NOT induce vomiting unless
Ingestion
directed to do so by medical personnel. If vomiting occurs, keep head lower than hips to help prevent
aspiration. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Section 5. Fire Fighting Measures
Not applicable. Flammable Limits Not applicable.
Flash Point
Non-flammable. (CSMA
Flammability
Not applicable.
Auto-ignition Temperature
In case of fire, use water spray (fog), foam, dry chemical, or C2O. Wear special protective clothing and positive
Fire-Fighting Procedures
pressure, self-contained breathing apparatus.
Container explosion may occur under fire conditions or when heated. Thermal decomposition of product can produce toxic
Fire Hazard
vapors of Hydrogen Chloride (HCl), Chlorine and Phosgene Gas.
Products of Combustion Carbon Dioxide, Carbon Monoxide, Hydrogen Chloride (HCl), Chlorine and Phosgene Gas.
Not available.
Explosion hazard
Page: 1/3
Material Safety Data Sheet Product Name LUBRISIL
Product Code 0058
Section 6. Accidental Release Measures
Spill Clean up Large spills are unlikely due to packaging.
Section 7. Handling and Storage
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or spray mists. Use only with adequate
Handling
ventilation. Wash thoroughly after handling. Wash contaminated clothing before reusing. Watch for
accumulation in low confined areas. Do not pressurize, cut, weld, braze, solder, drill, grind, on or near
containers.
Keep away from heat and direct sunlight. Keep container in a cool, well-ventilated area. Do not store above
Storage
49掳C (120.2掳F). Do not puncture or incinerate. Keep out of the reach of children.
Section 8. Exposure Controls, Personal Protection
Engineering Controls Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors
below their respective occupational exposure limits. Ensure that eyewash stations and safety showers
are proximal to the work-station location.
Personal Protection Protective Clothing (Pictograms)
Safety glasses.
Eyes
Hands and Body Chemical resistant gloves.
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective occupational exposure limits. Wear appropriate respirator when
ventilation is inadequate.
Exposure Limits
Name of Hazardous Ingredients CAS # Exposure Limits
Trichloroethylene 79-01-6 ACGIH TLV (United States).
TWA: 50 ppm 8 hour(s).
STEL: 100 ppm 15 minute(s).
OSHA PEL (United States).
TWA: 50 ppm 8 hour(s).
STEL: 200 ppm 15 minute(s).
Blend of Propane and Isobutane 74-98-6; 75-28-5 ACGIH TLV (United States).
TWA: 800 ppm 8 hour(s).
OSHA PEL (United States).
TWA: 1000 ppm 8 hour(s).
Consult local authorities for acceptable exposure limits.
Section 9. Physical and Chemical Properties
Physical State Liquid. (Aerosol.) Color Clear. Colorless.
Odor Mild. Solvent-like.
Not applicable.
pH
Vapor Pressure 7.9 kPa (59 mmHg) (at 20掳C)
87.2掳C (189掳F)
Boiling Point
Vapor Density Not available.
Freezing Point Not available.
Evaporation Rate<1
Specific Gravity 1.41 (Water = 1)
VOC (Consumer) 95.1% 11.1 (lb/gal) 1338
Insoluble in cold water, hot water.
Solubility
(g/l)
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Reactive with oxidizing agents, metals, alkalis.
Incompatibility
Will not occur.
Reactivity
Hazardous Decomposition Products Carbon Dioxide, Carbon Monoxide, Hydrogen Chloride (HCl), Chlorine and
Phosgene Gas.
Section 11. Toxicological Information
Trichloroethylene - Classified + (Proven) by OSHA, Classified 2A (Probable for human) by IARC,
Carcinogenic Effects
Group 2 (Reasonably Anticipated To Be Human Carcinogen) by NTP
Not available.
Reproductive Effects
Not available.
Mutagenic Effects
Not available.
Teratogenic Effects
Section 12. Ecological Information
Not available.
Ecotoxicity
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste Stream Not available.
Waste Information Consult your local or regional authorities. Waste
must be disposed according to applicable
regulations.
Page: 2/3
Material Safety Data Sheet Product Name LUBRISIL
Product Code 0058
Section 14. Transport Information
Label
Regulatory UN Proper shipping Class Packing Additional
Information number name Group information
Limited
TDG
Quantity
Classification
Limited Quantity: Small quantities of controlled goods are not regulated as Dangerous Goods according to the TDG regulations.
Section 15. Regulatory Information
Class A: Compressed gas.
WHMIS (Canada)
Class D-2B: Material causing other toxic effects (TOXIC).
Not available.
Other Regulations
This product has been classifed according to the hazard criteria of the CPR and the MSDS contains all of the available information required by the CPR.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with cautio
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exis
|