Zep Inc.
Material Safety Data Sheet
1310 Seaboard Industrial Blvd.
Atlanta, GA 30318
1-877-I-BUY-ZEP (428-9937)
and Safe Handling and Disposal Information
www.zep.com
Section 1. Chemical Product and Company Identification
Product name ZEP STAINLESS STEEL POLISH
Aerosol Stainless Steel Cleaner and Polish
Product use
Product code 0143
Date of issue Supersedes 04/07/95
11/16/04
Emergency For MSDS Information:
Telephone Compliance Services 1-877-I-BUY-ZEP (428-9937)
Numbers
For Medical Emergency
INFOTRAC: (877) 541-2016 Toll Free - All Calls
Recorded
For Transportation Emergency
CHEMTREC: (800) 424-9300 - All Calls Recorded
In the District of Columbia (202) 483-7616
Prepared By
Compliance Services
Printing date: 06/23/08
1420 Seaboard Industrial Blvd.
Atlanta, GA 30318
Section 2. Composition, Information on Ingredients
Name of hazardous ingredients CAS # % by Weight Exposure Limits
PARAFFIN OIL; blend of heavy and light naphthenic petroleum distillate 64742-52-5 60 - 70 OSHA PEL (United States).
: 5 mg/m 3 8 hour(s). Form: Mist
ACGIH TLV (United States).
: 5 mg/m 3 8 hour(s). Form: Mist
PETROLEUM SPIRITS; vm&p naphtha; refined solvent naphtha 8032-32-4 10 - 20 ACGIH (United States).
TWA: 300 ppm
OSHA (United States).
STEL: 400 ppm
D-LIMONENE - orange distillate; citrus terpene; cyclohexene, 1-methyl- 5989-27-5 5 - 10
4-(1-methylethenyl)-, (R)-
ISOPROPYL ALCOHOL; ipa; dimethylcarbinol; 2-propanol 67-63-0 <5 ACGIH TLV (United States).
TWA: 200 ppm 8 hour(s).
OSHA PEL (United States).
TWA: 400 ppm 8 hour(s).
ACGIH/OSHA (United States).
STEL: 400 ppm 15 minute(s).
Section 3. Hazards Identification HMIS
Health 1
Routes of Entry Absorbed through skin. Eye contact. Inhalation.
Acute Effects
Fire Hazard 3
Hazardous by the following route of exposure: of skin contact (irritant, permeator, sensitizer).
Skin Reactivity 0
May cause allergic reactions in certain individuals. Skin inflammation is characterized by
itching, scaling, reddening or, occasionally, blistering. Defatting properties, may aggravate
an existing dermatitis
Hazardous by the following route of exposure: of eye contact (irritant). Inflammation of the
Eyes Personal Protection B
eye is characterized by redness, watering and itching.
Inhalation Hazardous by the following route of exposure: of inhalation. May cause respiratory tract
irritation. Can cause central nervous system (CNS) depression. Medical conditions
aggravated by over-exposure Respiratory
Ingestion Unlikely in this form.
NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse health effects are lessened by
following all prescribed safety precautions, including use of proper personal protective equipment.
Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Carcinogenic Effects
Prolonged or repeated contact may dry skin and cause irritation. Over-exposure by inhalation or
Chronic Effects
absorption can cause central nervous system depression.
See Toxicological Information (section 11)
Page: 1/3
Product code 0143 Product Name ZEP STAINLESS STEEL POLISH
Material Safety Data Sheet
Section 4. First Aid Measures
Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Get medical
Eye Contact
attention.
Wash affected area with soap or mild detergent and water. Remove contaminated clothing and shoes. Get
Skin Contact
medical attention if irritation develops.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
Inhalation
oxygen. Get medical attention.
Aspiration hazard if swallowed. Can enter lungs and cause damage. Do not induce vomiting unless directed
Ingestion
to do so by medical personnel. If vomiting occurs, keep head lower than hips to help prevent aspiration.
Never give anything by mouth to an unconscious person. Get medical attention immediately.
Section 5. Fire Fighting Measures
Closed cup (Tagliabue.): <26掳C Flammable Limits Not available. 3
Flash Point
(<79掳F). 1 0
FLAMMABLE. (CSMA)
Flammability
FLAMMABLE LIQUID AND VAPOR. Vapor may cause flash fire. Vapors may accumulate
Fire hazard
in low or confined areas or travel a considerable distance to a source of ignition and flash back.
Cool closed containers exposed to fire with water.
Use dry chemical or CO2. Wear special protective clothing and positive
Fire-fighting procedures
pressure, self-contained breathing apparatus.
Section 6. Accidental Release Measures
Large spills are unlikely due to packaging.
Spill Clean up
Section 7. Handling and Storage
Keep away from heat, sparks and flame. Avoid contact with eyes, skin and clothing. Avoid breathing vapors,
Handling
spray or mists. Use only with adequate ventilation. Wash contaminated clothing before reusing.
CONTENTS UNDER PRESSURE. Store and use away from heat, sparks, open flame or any other ignition source.
Storage
Keep away from heat and direct sunlight. Keep container in a cool, well-ventilated area. Do not store above the
following temperature: 49掳C (120.2掳F). Do not puncture or incinerate. Keep out of the reach of children.
Section 8. Exposure Controls, Personal Protection
Personal Protection Protective Clothing (Pictograms)
Safety glasses.
Eyes
Nitrile gloves.
Body
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective occupational exposure limits.
Section 9. Physical and Chemical Properties
Physical State Liquid. [Aerosol.] Amber.
Color
Citrus
Not available. Odor
pH
Not available.
82.222掳C (180掳F) Vapor Pressure
Boiling Point
Not available.
Specific Gravity 0.856 Vapor Density
Not available.
Evaporation Rate
Insoluble in the following materials: cold water, hot
Solubility
24.8% 1.77 lbs/gal 212 g/l
water. VOC (Consumer)
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Avoid contact with strong oxidizers, excessive heat, sparks or open flame. Incompatible with some
Incompatibility
alkalis.
Hazardous Polymerization Will not occur.
Hazardous Decomposition Products Carbon dioxide., Carbon monoxide. and other organic materials..
Section 11. Toxicological Information
Toxicity to Animals Petroleum spirits:^[25,45,50,70
VAPOR (LC50): Acute: 3400 ppm 4 hour(s) [Rat].
d-Limonene:^[25,45,50,70
ORAL (LD50): Acute: 5600 mg/kg [Mouse]. 4400 mg/kg [Rat].
DERMAL (LD50): Acute: >5000 mg/kg [Rabbit].
Isopropyl Alcohol:^[25,45,50,70
ORAL (LD50): Acute: 4700 mg/kg [Rat].
DERMAL (LD50): Acute: 13000 mg/kg [Rabbit].
VAPOR (LC50): Acute: 22500 ppm 8 hour(s) [Rat (Male)]. 19000 ppm 8 hour(s) [Rat
(Female)].
Page: 2/3
Product code 0143 Product Name ZEP STAINLESS STEEL POLISH
Material Safety Data Sheet
Section 12. Ecological Information
Not available.
Ecotoxicity
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, Waste Stream Code: D001
Waste
Classification: - [Hazardous waste.]
state and local environmental control regulations.
Information
Origin: - [RCRA waste.]
Consult your local or regional authorities.
Section 14. Transport Information
Proper shipping name Consumer commodity
ORM-D UN number Not regulated.
DOT Classification
NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to
the Bill of Lading with your shipment.
ORM-D
TDG Classification
Section 15. Regulatory Information
SARA 313 toxic chemical notification and release reporting:
U.S. Federal Regulations
No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
All Components of this product are listed or exempt from listing on TSCA inventory.
WARNING: This product contains a chemical or chemicals known to the state of California to
State Regulations
cause cancer, birth defects or other reproductive harm.: Benzene; Toluene
Class A: Compressed gas.
WHMIS (Canada)
Class B-5: Flammable aerosol.
Class D-2B: Material causing other toxic effects (Toxic).
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|