Zep Manufacturing Co. of Canada
Material Safety Data Sheet
11627 178th Street
Edmonton, Alberta T5S 1N6
1-800-I-BUY-ZEP
and Safe Handling and Disposal Information
Section 1. Chemical Product and Company Identification
Product name IRONCLAD
Product Use Aerosol Corrosion Inhibitor
Product Code 0152
Date of issue Supersedes06/11/03
03/14/06
Emergency For MSDS Information:
Telephone Technical Services Group
Zep Manufacturing of Canada
Numbers
Telephone: (780) 453-8100 (Business Hours 8:00-5:00)
For a Medical or Transportation Emergency:
CANUTEC (24 Hours)
(613) 996-6666 - Call Collect
Prepared by Technical Services Group
Zep Manufacturing Co. of Canada
11627 178th Street
Edmonton, Alberta T5S 1N6
Printing date: 17/03/06
Date of Preparation : 03/14/06
Section 2. Composition, Information on Ingredients
Name of Hazardous Ingredients CAS # % by Weight Toxicity Data
PETROLEUM SPIRITS; vm&p naphtha; refined solvent naphtha 64742-89-8 15 - 40 LC50 Rat Inhalation 3400 ppm (4
hour(s))
BLEND OF ISOBUTANE & PROPANE 74-98-6; 75-28-5 10-30 Not Not Not Not available.
available. available. available.
Section 3. Hazards Identification
Acute Effects Routes of EntryDermal contact. Inhalation.
Skin Hazardous in case of skin contact (irritant, permeator). Direct contact may cause irritation and redness. Skin
inflammation is characterized by itching, scaling, or reddening. Product may be dermal absorbed.
Eyes Hazardous in case of eye contact (irritant). Inflammation of the eye is characterized by redness, watering, and
itching.
Inhalation Hazardous in case of inhalation. Avoid breathing vapors or spray mists. Over-exposure by inhalation may cause
respiratory irritation. Can cause central nervous system depression.
Ingestion Harmful if swallowed. Aspiration hazard if swallowed- can enter lungs and cause damage.
Chronic Effects The substance may be toxic to kidneys, liver. Overexposure of this product by inhalation or absorption
can produce central nervous system depression resulting in headache, nausea and/or dizziness.
Repeated or prolonged exposure to the substance can produce target organs damage. Prolonged or
repeated contact may dry skin and cause irritation. Repeated exposure to a highly toxic material may
produce general deterioration of health by an accumulation in one or many human organs.
Additional information : See Toxicological Information (section 11)
Section 4. First Aid Measures
Eye Contact Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15
minutes, keeping eyelids open. Get medical attention immediately.
Skin Contact In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes.
Wash clothing before reuse. Get medical attention if irritation develops.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
Inhalation
oxygen. Get medical attention.
Ingestion Aspiration hazard if swallowed- can enter lungs and cause damage. Do NOT induce vomiting unless
directed to do so by medical personnel. If vomiting occurs, keep head lower than hips to help prevent
aspiration. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Section 5. Fire Fighting Measures
Flammable LimitsNot available.
Flash Point Not available.
Extremely flammable. (CSMA) Aerosol that may flashback.
Flammability
Auto-ignition Temperature
Fire-Fighting Procedures Use dry chemical or CO Wear special protective clothing and positive pressure, self-contained
2.
breathing apparatus. Cool closed containers exposed to fire with water.
Fire Hazard FLAMMABLE LIQUID AND VAPOR. Vapor may cause flash fire. Vapors may accumulate in low or
confined areas, travel considerable distance to source of ignition and flash back. Container explosion may
occur under fire conditions or when heated.
Products of Combustion Carbon Dioxide, Carbon Monoxide and other organic materials..
Explosion hazard
Page: 1/3
Material Safety Data Sheet Product Name IRONCLAD
Product Code 0152
Section 6. Accidental Release Measures
Spill Clean up Large spills are unlikely due to packaging.
Section 7. Handling and Storage
Handling Keep away from heat, sparks and flame. Avoid contact with eyes, skin and clothing. Use only with adequate
ventilation. Avoid breathing vapors or spray mists. Do not ingest. Wash contaminated clothing before
reusing. Wash thoroughly after handling.
Storage CONTENTS UNDER PRESSURE. Avoid all possible sources of ignition (spark or flame). Keep container in a
cool, well-ventilated area. Do not store above 49掳C (120.2掳F). Do not puncture or incinerate. Keep out of the
reach of children.
Section 8. Exposure Controls, Personal Protection
Engineering Controls
Personal Protection Protective Clothing (Pictograms)
Eyes Safety glasses.
Hands and Body Nitrile gloves. Rubber gloves. Neoprene glove
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective occupational exposure limits. Wear appropriate respirator when
ventilation is inadequate. Approved/certified respirator with organic vapor cartridges.
Exposure Limits
Name of Hazardous Ingredients CAS # Exposure Limits
Blend of Propane and Isobutane 74-98-6; 75-28-5 ACGIH TLV (United States).
TWA: 800 ppm 8 hour(s).
OSHA PEL (United States).
TWA: 1000 ppm 8 hour(s).
Consult local authorities for acceptable exposure limits.
Section 9. Physical and Chemical Properties
Physical State Liquid. (Aerosol.) Color Tan. Opaque.
Odor Hydrocarbon.
pH Not applicable.
Vapor Pressure Not determined.
Boiling Point Not determined.
Vapor Density Not determined.
Freezing Point
Evaporation RateNot determined.
Specific Gravity 0.75 (Water = 1)
VOC (Consumer) 598.5 (g/l). 4.99 lbs/gal 79.55%
Solubility Insoluble in cold water, hot water.
Section 10. Stability and Reactivity
Stability and Reactivity The product is stable.
Incompatibility Avoid contact with strong oxidizers, excessive heat, sparks or open flame.
Reactivity Will not occur.
Hazardous Decomposition Products Carbon Dioxide, Carbon Monoxide and other organic materials..
Section 11. Toxicological Information
Carcinogenic Effects Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Reproductive Effects
Mutagenic Effects
Teratogenic Effects
Section 12. Ecological Information
Ecotoxicity Not available.
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste Stream Code: D001
Waste Information Waste must be disposed according to applicable
Classification: - (Hazardous waste.)
regulations. Consult your local or regional
Origin: - (RCRA waste.)
authorities.
Section 14. Transport Information
Label
Regulatory UN Proper shipping Class Packing Additional
Information number name Group information
1950 Aerosols, flammable 2.1 - Expl osi ve Li mi t
TDG
Classification and Limited
Quantity Index
2
1
Limited Quantity: Small quantities of controlled goods are not regulated as Dangerous Goods according to the TDG regulations.
Page: 2/3
Material Safety Data Sheet Product Name IRONCLAD
Product Code 0152
Section 15. Regulatory Information
WHMIS (Canada) Class A: Compressed gas.
Class B-5: Flammable aerosol.
Class D-2B: Material causing other toxic effects (TOXIC).
Other Regulations
This product has been classifed according to the hazard criteria of the CPR and the MSDS contains all of the available information required by the CPR.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with cautio
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exis
|