ZEP Inc.
11627 178th Street
Material Safety Data Sheet
Edmonton, Alberta T5S 1N6
1-800-I-877-I-BUY-ZEP (428-9937)
www.zep.com
Section 1. Chemical Product and Company Identification
Product name COLD GALVANIZE COATING
Aerosol. Coating., Corrosion inhibitor.
Product use
Product code 0190
Date of issue Supersedes 02/10/05
01/17/08
Emergency Telephone Numbers
For MSDS Information:
Technical Services Group
Telephone (780) 453-8100
(Business Hours 8:00am - 5:00pm)
For Medical or Transportation Emergency
CANUTEC (24 Hours)
(613) 996-6666 - Call Collect
Prepared By
Technical Services Group
Printing date: 07/02/08
11627 178th Street
Edmonton, Alberta T5S 1N6
Section 2. Hazards Identification
Emergency overview
Flammable aerosol
EXTREMELY FLAMMABLE.
Extremely flammable. Flammable aerosol. Avoid contact with skin and clothing.
NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse effects are lessened by following all
prescribed safety precautions, including the use of proper personal protective equipment.
Absorbed through skin. Inhalation.
Acute Effects Routes of Entry
Irritating to eyes. Inflammation of the eye is characterized by redness, watering and itching.
Eyes
Harmful in contact with skin. Irritant, permeator. Skin inflammation is characterized by itching,
Skin
scaling, or reddening.
Inhalation Harmful by inhalation. Avoid breathing vapors, spray or mists. Over-exposure by inhalation may
cause respiratory irritation. Can cause central nervous system (CNS) depression. Symptoms and
signs include headache, dizziness, fatigue, muscular weakness, drowsiness and, in extreme cases,
loss of consciousness.
Ingestion Harmful if swallowed. Aspiration hazard if swallowed. Can enter lungs and cause damage.
Prolonged skin contact may cause dermatitis with drying and cracking of skin. Overexposure of
Chronic effects
this product by inhalation or absorption can produce central nervous system depression resulting
in headache, nausea and/or dizziness.
Additional Information: See Toxicological Information (Section 11)
Section 3. Composition/Information on Ingredients
Name of Hazardous Ingredients CAS number % by Weight
68476-85-7 15 - 40
PROPANE; liquefied petroleum gas
7440-66-6 10 - 30
ZINC DUST AND RESIN BINDER
64742-89-8 15 - 40
ALIPHATIC PETROLEUM DISTILLATE; lactol spirits
Section 4. First Aid Measures
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and
Eye Contact
remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.
Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if
Skin Contact
symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide
Inhalation
artificial respiration or oxygen by trained personnel. Get immediate medical attention.
Aspiration hazard if swallowed. Can enter lungs and cause damage. Never give anything by mouth to an
Ingestion
unconscious person. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs,
the head should be kept low so that vomit does not enter the lungs. Get medical attention immediately.
Page: 1/3
Product Name COLD GALVANIZE COATING
Material Safety Data Sheet
Product code 0190
Section 5. Fire Fighting Measures
Closed cup: 27.2掳C (81掳F)
Flash Point
[Tagliabue.]
Flammable Limits not available
Extremely flammable. (CSMA) Aerosol that may
Flammability
flash back.
Auto-ignition Temperature
Fire-fighters should wear appropriate protective equipment and self-contained breathing
Fire-Fighting Procedures
apparatus (SCBA) with a full face-piece operated in positive pressure mode. Use dry chemical or
CO2. Cool containers with water jet in order to prevent pressure build-up, auto-ignition or
explosion.
In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of
Fire hazard
a subsequent explosion. Gas may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back, causing fire or explosion. Bursting aerosol
containers may be propelled from a fire at high speed.
carbon oxides (CO, CO2) May emit toxic fumes under fire conditions.
Products of Combustion
Not available.
Explosion hazard
Section 6. Accidental Release Measures
Stop leak if without risk. Dilute with water and mop up if water-soluble or absorb with an inert dry material and
Spill Clean up
place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. Large
spills are unlikely due to packaging.
Section 7. Handling and Storage
Put on appropriate personal protective equipment (see section 8). Store and use away from heat, sparks, open flame
Handling
or any other ignition source. Use only with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Avoid breathing vapors, spray or mists. Avoid contact with eyes, skin and clothing. Wash thoroughly
after handling.
CONTENTS UNDER PRESSURE. Do not store above the following temperature: 49掳C (120.2掳F). Store and use
Storage
away from heat, sparks, open flame or any other ignition source. Store away from direct sunlight in a dry, cool and
well-ventilated area, away from incompatible materials (see section 10) and food and drink. Do not puncture or
incinerate. Keep out of the reach of children.
Section 8. Exposure Controls/Personal Protection
Product name Exposure limits
Propane ACGIH TLV (United States).
: 800 ppm 8 hour(s).
OSHA PEL (United States).
TWA: 1000 ppm 8 hour(s).
Zinc dust ACGIH TLV (United States).
TWA: 15 mg/m鲁 8 hour(s). Form: Dust
Personal Protective Equipment (PPE)
Recommended: Splash goggles.
Eyes
Hands and Nitrile gloves. Neoprene gloves. Rubber gloves.
Body
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering
controls to keep the airborne concentrations of vapors below their respective
occupational exposure limits. Wear appropriate respirator when ventilation is
inadequate. Approved/certified respirator with organic vapor cartridge.
Section 9. Physical and Chemical Properties
Liquid. [Aerosol.] Color Gray.
Physical State
Not available. Odor Solvent-like.
pH
42.7掳C (108.9掳F) Vapor Pressure Not determined.
Boiling Point
1.105 (water = 1) Vapor Density Not determined.
Specific Gravity
Insoluble in the following materials: cold water and Evaporation Rate Not available.
Solubility
hot water.
VOC (Consumer) 75%
Freezing Point
Page: 2/3
Product Name COLD GALVANIZE COATING
Material Safety Data Sheet
Product code 0190
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Avoid contact with strong oxidizers, excessive heat, sparks or open flame.
Incompatibility
Hazardous Polymerization Will not occur.
Hazardous Decomposition Products carbon oxides (CO, CO2) May emit toxic fumes under fire conditions.
Section 11. Toxicological Information
Carcinogenicity Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Acute Toxicity
Not available.
Section 12. Ecological Information
No known significant effects or critical hazards.
Environmental Effects
Aquatic Ecotoxicity
Not available.
Section 13. Disposal Considerations
Waste Information
Waste must be disposed of in accordance with applicable regulations. Consult your local or regional authorities for additional information.
Waste Stream
Section 14. Transport Information
Regulatory information UN number Proper shipping name Classes PG* Label Additional information
TDG Classification 1950 Aerosols, flammable 2.1 - Explosive Limit
and Limited
Quantity Index
2
1
-
IMDG Class
NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to
the Bill of Lading with your shipment. Limited Quantity: Small quantities of controlled goods are not regulated as Dangerous
Goods according to TDG regulations.
PG* : Packing group
Section 15. Regulatory Information
Canada
Class A: Compressed gas.
WHMIS (Canada)
Class B-5: Flammable aerosol.
Class D-2B: Material causing other toxic effects (Toxic).
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|