Search   
MSDS 
:
 4,4'-Methylenedianiline, 99% (Titr.)
CAS 
:
 101-77-9
SYNONYMS 
:
 p,p'-Diaminodiphenylmethane; 4,4'-Diaminodiphenylmethane; MDA.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 101-77-9 |4,4'-Methylenedianiline | 99 | 202-974-4
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T N
Risk Phrases: 20/21/22 43 45 48/20/21 51/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. May
cause sensitization by skin contact. May cause cancer. Harmful :
danger of serious damage to health by prolonged exposure through
inhalation and in contact with skin. Toxic to aquatic organisms; may
cause long-term adverse effects in the aquatic environment.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation. Harmful if absorbed through the skin. May
cause skin sensitization, an allergic reaction, which becomes evident
upon re-exposure to this material.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
4,4'-Methylenedianiline can cause liver disease (toxic hepatitis).
Symptoms include loss of appetite, jaundice, dark urine, fever,
upper abdominal pain and fatigue.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation.
Chronic:
Repeated exposure may cause sensitization dermatitis. Effects may be
delayed. Potential cancer hazard. 4,4'-Methylenedianiline can cause
heart damage. One case of transient cardiac ischemia (deficiency of
blood) following exposure to MDA dusts has been documented.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. May polymerize
explosively when involved in a fire. Contact with metals may evolve
flammable hydrogen gas. Containers may explode when heated.
Combustible material; may burn but does not ignite readily.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Appearance: almost white
Odor: faint odor
pH: 9-10 (10% slurry)
Vapor Pressure: 0.06 hPa @ 20 C
Viscosity: Not available.
Boiling Point: 398-399 deg C @ 768mmHg
Freezing/Melting Point: 88-92 deg C
Autoignition Temperature: 267 deg C ( 512.60 deg F)
Flash Point: 220 deg C ( 428.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 270 deg C
Solubility in water: Insoluble.
Specific Gravity/Density: 1.06 g/cm3
Molecular Formula: C13H14N2
Molecular Weight: 198.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, aniline.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 101-77-9: BY5425000
LD50/LC50:
CAS# 101-77-9: Draize test, rabbit, eye: 100 mg/24H Moderate; Oral,
mouse: LD50 = 264 mg/kg; Oral, rabbit: LD50 = 620 mg/kg; Oral, rat:
LD50 = 517 mg/kg; Skin, rabbit: LD50 = 200 mg/kg.
Carcinogenicity:
4,4'-Methylenedianiline -
ACGIH: A3 - Animal Carcinogen
California: carcinogen; initial date 1/1/88
NIOSH: potential occupational carcinogen
NTP: Suspect carcinogen
OSHA: Possible Select carcinogen
IARC: Group 3 carcinogen (listed as ** undefined **).
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: 4,4'-DIAMINODIPHENYLMETHANE
Hazard Class: 6.1
UN Number: 2651
Packing Group: III
IMO
Shipping Name: 4,4'-DIAMINODIPHENYLMETHANE
Hazard Class: 6.1
UN Number: 2651
Packing Group: III
RID/ADR
Shipping Name: 4,4'-DIAMINODIPHENYLMETHANE
Hazard Class: 6.1
UN Number: 2651
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T N
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 43 May cause sensitization by skin contact.
R 45 May cause cancer.
R 48/20/21 Harmful : danger of serious damage to
health by prolonged exposure through inhalation and in
contact with skin.
R 51/53 Toxic to aquatic organisms; may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/Safety data sheets.
WGK (Water Danger/Protection)
CAS# 101-77-9: 3
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits
CAS# 101-77-9: MEL-United Kingdom, TWA 0.01 ppm TWA; 0.08 mg/m3 TWA

Canada
CAS# 101-77-9 is listed on Canada's DSL List.
CAS# 101-77-9 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 101-77-9: OEL-AUSTRALIA:TWA 0.1 ppm (0.8 mg/m3);Skin
OEL-BELGIUM:TWA 0.1 ppm (0.81 mg/m3);Skin;Carcinogen
OEL-DENMARK:TWA 0.1 ppm (0.8 mg/m3)
OEL-GERMANY;Skin;Carcinogen
OEL-THE NETHERLANDS:TWA 0.1 ppm (0.8 mg/m3)
OEL-SWITZERLAND:TWA 0.1 ppm (0.8 mg/m3);Skin;Carcinogen
OEL-UNITED KINGDOM:TWA 0.1 ppm (0.8 mg/m3);STEL 0.5 ppm
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 101-77-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #8 Date: 7/16/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Hexadien-1-Ol, 99%, Mixture of Isomers 111-28-4
Benzalkoniumchloride, 50 wt% Aq.Solution 7732-18-5
3-Bromo-1,1,1-trifluoro-2-propanol, 96% (g c) 88378-50-1
Glutaraldehyde sodium bisulfite addition compound, 95% 28959-35-5
4-Bromobenzoyl chloride, 98% 586-75-4
4,4'-Methylenedianiline, 99% (Titr.) 101-77-9
2-Methylcinnamic acid, 99% 2373-76-4
Platinum black, 98% Pt 7440-06-4
Rubidium nitrate, 99.8% 13126-12-0
Calcium Hypochlorite 7778-54-3
cis-2-Amino-1-cyclopentanecarboxylic acid hydrochloride hemihydrate 7664-93-9
Dichlorodiphenylmethane, 99% 2051-90-3
Tryptone
2-Butene-1,4-Diol, 97% Cis 6117-80-2
Boric acid, 2 % w/v aqueous solution 7732-18-5
Molecular Sieves, 5A, Powder, Max. Grain-Size 50 Micron 0-00-1
Heptaldehyde, 96% (gc) 111-71-7
Alpha-Amylase 9000-90-2
Lead, 1000 ppm, standard metal solution in approx. M nitric acid 7439-92-1
2-Picoline, 98% 109-06-8
Vinyl sulfone,97% stabilized with 500 ppm hydroquinone 77-77-0
Potassium Chloride, saturated solution 7447-40-7
Potassium Chloride 3 M-4 M Solutions 7447-40-7
Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric 333-20-0
Sodium Thiosulfate, 0.100 N Solution 7732-18-5
Ethanol SDA1, Anhydrous 64-17-5
1-O-Octyl-beta-D-glucopyranoside 29836-26-8
Soap solution - Wanklyn 143-18-0
1-Octane sulfonic acid, sodium salt 5324-84-5
This is a test. 67-56-1
Polyurethane foam (polymer A) 0-00-0
Tetrabromocatechol, 96% 488-47-1
Alpha-Bromo-4-Nitro-O-Cresol 772-33-8
Trimethyl-ethoxysilane 7732-18-5
Diethyl citrate, tech. 7553-56-2
alpha-Cyano-3-hydroxycinnamic acid, 99% 54673-07-3
2,4,6-Triphenyl-s-triazine 493-77-6
Zinc Metal (Granular and Mossy) 7440-66-6
Magnesium Powder 7439-95-4
Geometric Data Fixative (BSI) 67-56-1
Isopropyl-dimethyl-chlorosilane 67-63-0
Wright Stain 67-56-1
Lithium diisopropylamide, 2M solution in THF/n-heptane 100-41-4
Gastrak 4 Molar Potassium Chloride (BSI) 7447-40-7
1-Acetyl-2-Phenylhydrazine, 98% 114-83-0
Sulfosalicylic acid 20% 97-05-2
Hydrochloric Acid 4N, 5N and 6N 7647-01-0
Hydrochloric Acid 0.01 N to 1.0N 7647-01-0
Hydrochloric Acid 0.1 N 90-43-7
Acetic acid 1N 64-19-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net