**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 97-05-2 |5-Sulfosalicylic acid | 20 | 202-555-6 |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | 80 | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes and skin.Corrosive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Contact with liquid is corrosive and causes severe burns and
ulceration.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Substance is nonflammable; use agent most appropriate to extinguish
surrounding fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Absorb spill with
an alkaline material such as soda ash or lime.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Do not get in eyes, on skin, or on clothing. Do not
ingest or inhale.
Storage:
Store in a cool, dry place.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 97-05-2:
CAS# 5965-83-3:
CAS# 7732-18-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: Odorless.
pH: 1.3
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 100 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Complete in water.
Specific Gravity/Density: 1.2 (Water=1)
Molecular Formula: C7H6O6S.2H2O
Molecular Weight: 254.1252
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents and strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, sulfur oxides (SOx), including
sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 97-05-2: VO6500000
CAS# 5965-83-3 unlisted.
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 97-05-2: Oral, rat: LD50 = 1850 mg/kg.
CAS# 5965-83-3.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
5-Sulfosalicylic acid -
Not listed by ACGIH, IARC, or NTP.
Sulfosalcylic acid, dihydrate -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUIDS, N.O.S.(20% SULFOSALICYCLIC ACID
)
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUIDS, N.O.S.(20% SULFOSALICYCLIC ACID
)
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUIDS, N.O.S.(20% SULFOSALICYCLIC ACID
)
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 97-05-2: 1
CAS# 5965-83-3: No information available.
CAS# 7732-18-5: No information available.
Canada
CAS# 97-05-2 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 97-05-2 is not listed on Canada's Ingredient Disclosure List.
CAS# 5965-83-3 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 97-05-2 is listed on the TSCA inventory.
CAS# 5965-83-3 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).
CAS# 7732-18-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Text for R-phrases from Section 2
MSDS Creation Date: 12/12/1997 Revision #3 Date: 1/26/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,4-Hexadien-1-Ol, 99%, Mixture of Isomers
| 111-28-4 |
|
Benzalkoniumchloride, 50 wt% Aq.Solution
| 7732-18-5 |
|
3-Bromo-1,1,1-trifluoro-2-propanol, 96% (g c)
| 88378-50-1 |
|
Glutaraldehyde sodium bisulfite addition compound, 95%
| 28959-35-5 |
|
4-Bromobenzoyl chloride, 98%
| 586-75-4 |
|
4,4'-Methylenedianiline, 99% (Titr.)
| 101-77-9 |
|
2-Methylcinnamic acid, 99%
| 2373-76-4 |
|
Platinum black, 98% Pt
| 7440-06-4 |
|
Rubidium nitrate, 99.8%
| 13126-12-0 |
|
Calcium Hypochlorite
| 7778-54-3 |
|
cis-2-Amino-1-cyclopentanecarboxylic acid hydrochloride hemihydrate
| 7664-93-9 |
|
Dichlorodiphenylmethane, 99%
| 2051-90-3 |
|
Tryptone
| |
|
2-Butene-1,4-Diol, 97% Cis
| 6117-80-2 |
|
Boric acid, 2 % w/v aqueous solution
| 7732-18-5 |
|
Molecular Sieves, 5A, Powder, Max. Grain-Size 50 Micron
| 0-00-1 |
|
Heptaldehyde, 96% (gc)
| 111-71-7 |
|
Alpha-Amylase
| 9000-90-2 |
|
Lead, 1000 ppm, standard metal solution in approx. M nitric acid
| 7439-92-1 |
|
2-Picoline, 98%
| 109-06-8 |
|
Vinyl sulfone,97% stabilized with 500 ppm hydroquinone
| 77-77-0 |
|
Potassium Chloride, saturated solution
| 7447-40-7 |
|
Potassium Chloride 3 M-4 M Solutions
| 7447-40-7 |
|
Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric
| 333-20-0 |
|
Sodium Thiosulfate, 0.100 N Solution
| 7732-18-5 |
|
Ethanol SDA1, Anhydrous
| 64-17-5 |
|
1-O-Octyl-beta-D-glucopyranoside
| 29836-26-8 |
|
Soap solution - Wanklyn
| 143-18-0 |
|
1-Octane sulfonic acid, sodium salt
| 5324-84-5 |
|
This is a test.
| 67-56-1 |
|
Polyurethane foam (polymer A)
| 0-00-0 |
|
Tetrabromocatechol, 96%
| 488-47-1 |
|
Alpha-Bromo-4-Nitro-O-Cresol
| 772-33-8 |
|
Trimethyl-ethoxysilane
| 7732-18-5 |
|
Diethyl citrate, tech.
| 7553-56-2 |
|
alpha-Cyano-3-hydroxycinnamic acid, 99%
| 54673-07-3 |
|
2,4,6-Triphenyl-s-triazine
| 493-77-6 |
|
Zinc Metal (Granular and Mossy)
| 7440-66-6 |
|
Magnesium Powder
| 7439-95-4 |
|
Geometric Data Fixative (BSI)
| 67-56-1 |
|
Isopropyl-dimethyl-chlorosilane
| 67-63-0 |
|
Wright Stain
| 67-56-1 |
|
Lithium diisopropylamide, 2M solution in THF/n-heptane
| 100-41-4 |
|
Gastrak 4 Molar Potassium Chloride (BSI)
| 7447-40-7 |
|
1-Acetyl-2-Phenylhydrazine, 98%
| 114-83-0 |
|
Sulfosalicylic acid 20%
| 97-05-2 |
|
Hydrochloric Acid 4N, 5N and 6N
| 7647-01-0 |
|
Hydrochloric Acid 0.01 N to 1.0N
| 7647-01-0 |
|
Hydrochloric Acid 0.1 N
| 90-43-7 |
|
Acetic acid 1N
| 64-19-7 |
|
|