Search   
MSDS 
:
 Hydrochloric Acid 0.01 N to 1.0N
CAS 
:
 7647-01-0
SYNONYMS 
:
 Chlorohydric acid; Hydrogen chloride; Muriatic acid; Spirits of salt;     Hydrochloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7647-01-0 |Hydrogen chloride | 0.04-3.6 | 231-595-7 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | >96.4 | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN C
Risk Phrases: 35 20

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes severe burns. Harmful by inhalation.Corrosive.

Potential Health Effects
Eye:
May cause irreversible eye injury. Vapor or mist may cause
irritation and severe burns. Contact with liquid is corrosive to the
eyes and causes severe burns. May cause painful sensitization to
light.
Skin:
May cause skin sensitization, an allergic reaction, which becomes
evident upon re-exposure to this material. Contact with liquid is
corrosive and causes severe burns and ulceration.
Ingestion:
May cause circulatory system failure. Causes severe digestive tract
burns with abdominal pain, vomiting, and possible death. May cause
corrosion and permanent tissue destruction of the esophagus and
digestive tract.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Exposure to the mist and
vapor may erode exposed teeth. Causes corrosive action on the mucous
membranes.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Repeated
exposure may cause erosion of teeth. May cause fetal effects.
Laboratory experiments have resulted in mutagenic effects. Prolonged
exposure may cause conjunctivitis, photosensitization, and possible
blindness.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes). SPEEDY ACTION IS CRITICAL!
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
soap and water for at least 15 minutes while removing contaminated
clothing and shoes. Wash clothing before reuse. Destroy contaminated
shoes.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately. Give milk of
magnesia.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Do NOT use sodium bicarbonate in an attempt to neutralize the acid.
Antidote:
Do NOT use oils or ointments in eye.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water runoff can cause environmental damage. Dike
and collect water used to fight fire. During a fire, irritating and
highly toxic gases may be generated by thermal decomposition or
combustion. Not flammable, but reacts with most metals to form
flammable hydrogen gas. Use water spray to keep fire-exposed
containers cool. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas. Reaction with
water may generate much heat which will increase the concentration
of fumes in the air. Containers may explode when heated.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Substance is nonflammable; use agent most
appropriate to extinguish surrounding fire. Do NOT get water inside
containers. Do NOT use straight streams of water. Most foams will
react with the material and release corrosive/toxic gases. Cool
containers with flooding quantities of water until well after fire
is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Large spills may be neutralized with dilute alkaline solutions of
soda ash, or lime. Avoid runoff into storm sewers and ditches which
lead to waterways. Clean up spills immediately, observing
precautions in the Protective Equipment section. Provide
ventilation. A vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Remove contaminated clothing and wash before reuse. Contents may
develop pressure upon prolonged storage. Do not breathe dust, vapor,
mist, or gas. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Discard
contaminated shoes.
Storage:
Store in a cool, dry place. Do not store in direct sunlight. Keep
container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area. Do not store in metal
containers.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Personal Protective Equipment

Eyes:
Wear chemical goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure. Wear neoprene or polyvinyl chloride gloves
to prevent exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Appearance: colourless - colorless to slight yellow
Odor: strong, pungent
pH: 2.02(0.01N Solution)
Vapor Pressure: 5.7 mm Hg @ 0 deg C
Viscosity: Not available.
Boiling Point: 81.5-110 deg C @ 760 mmHg
Freezing/Melting Point: -74 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Miscible.
Specific Gravity/Density: 1.0 - 1.2
Molecular Formula: HCl
Molecular Weight: 36.46

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, metals, excess heat.
Incompatibilities with Other Materials:
Bases, acetic anhydride, alkali metals, aluminum, amines, copper,
copper alloys, fluorine, iron, sodium hydroxide, steel, sulfuric
acid, vinyl acetate, zinc, potassium permanganate, cesium acetylene
carbide, rubidium acetylene carbide, rubidium carbide, sodium,
chlorosulfonic acid, oleum, carbonates, perchloric acid, calcium
phosphide, metal oxides, acetates, cesium carbide,
beta-propiolactone, ethyleneimine, propylene oxide, lithium
silicides, alcohols + hydrogen cyanide, 2-aminoethanol, ammonium
hydroxide, calcium carbide, 1,1-difluoroethylene, ethylene diamine,
magnesium boride, mercuric sulfate, silver perchlorate + carbon
tetrachloride, uranium phosphide.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, carbon monoxide, carbon dioxide,
hydrogen gas.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7647-01-0: MW4025000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 7647-01-0: Inhalation, mouse: LC50 = 1108 ppm/1H; Inhalation,
rat: LC50 = 3124 ppm/1H; Oral, rabbit: LD50 = 900 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Hydrogen chloride -
IARC: Group 3 carcinogen
Water -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Bluegill/Sunfish: 3.6 mg/L; 48 Hr; Lethal (unspecified)Fish:
Bluegill/Sunfish: LD50; 96 Hr; pH 3.0-3.5
Other
For more information, see "HANDBOOK OF ENVIRONMENTAL FATE AND
EXPOSURE DATA."

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN C
Risk Phrases:
R 35 Causes severe burns.
R 20 Harmful by inhalation.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7647-01-0: 1
CAS# 7732-18-5: No information available.
United Kingdom Occupational Exposure Limits
CAS# 7647-01-0: OES-United Kingdom, TWA 1 ppm TWA; 2 mg/m3 TWA
CAS# 7647-01-0: OES-United Kingdom, STEL 5 ppm STEL; 8 mg/m3 STEL
CAS# 7647-01-0: OES-United Kingdom, STEL 5 ppm STEL; 8 mg/m3 STEL

Canada
CAS# 7647-01-0 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 7647-01-0 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 7647-01-0: OEL-AUSTRALIA:TWA 5 ppm (7 mg/m3)
OEL-AUSTRIA:TWA 5 ppm (7 mg/m3)
OEL-BELGIUM:STEL 5 ppm (7.7 mg/m3)
OEL-DENMARK:STEL 5 ppm (7 mg/m3)
OEL-FINLAND:STEL 5 ppm (7 mg/m3);Skin
OEL-FRANCE:STEL 5 ppm (7.5 mg/m3)
OEL-GERMANY:TWA 5 ppm (7 mg/m3)
OEL-HUNGARY:STEL 5 mg/m3
OEL-JAPAN:STEL 5 ppm (7.5 mg/m3)
OEL-THE NETHERLANDS:TWA 5 ppm (7 mg/m3)
OEL-THE PHILIPPINES:TWA 5 ppm (7 mg/m3)
OEL-POLAND:TWA 5 mg/m3
OEL-RUSSIA:STEL 5 ppm (5 mg/m3)
OEL-SWEDEN:STEL 5 ppm (8 mg/m3)
OEL-SWITZERLAND:TWA 5 ppm (7.5 mg/m3);STEL 10 ppm (15 mg/m3)
OEL-THAILAND:TWA 5 ppm (7 mg/m3)
OEL-TURKEY:TWA 5 ppm (7 mg/m3)
OEL-UNITED KINGDOM:TWA 5 ppm (7 mg/m3);STEL 5 ppm (7 mg/m3)
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 7647-01-0 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 2/06/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Hexadien-1-Ol, 99%, Mixture of Isomers 111-28-4
Benzalkoniumchloride, 50 wt% Aq.Solution 7732-18-5
3-Bromo-1,1,1-trifluoro-2-propanol, 96% (g c) 88378-50-1
Glutaraldehyde sodium bisulfite addition compound, 95% 28959-35-5
4-Bromobenzoyl chloride, 98% 586-75-4
4,4'-Methylenedianiline, 99% (Titr.) 101-77-9
2-Methylcinnamic acid, 99% 2373-76-4
Platinum black, 98% Pt 7440-06-4
Rubidium nitrate, 99.8% 13126-12-0
Calcium Hypochlorite 7778-54-3
cis-2-Amino-1-cyclopentanecarboxylic acid hydrochloride hemihydrate 7664-93-9
Dichlorodiphenylmethane, 99% 2051-90-3
Tryptone
2-Butene-1,4-Diol, 97% Cis 6117-80-2
Boric acid, 2 % w/v aqueous solution 7732-18-5
Molecular Sieves, 5A, Powder, Max. Grain-Size 50 Micron 0-00-1
Heptaldehyde, 96% (gc) 111-71-7
Alpha-Amylase 9000-90-2
Lead, 1000 ppm, standard metal solution in approx. M nitric acid 7439-92-1
2-Picoline, 98% 109-06-8
Vinyl sulfone,97% stabilized with 500 ppm hydroquinone 77-77-0
Potassium Chloride, saturated solution 7447-40-7
Potassium Chloride 3 M-4 M Solutions 7447-40-7
Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric 333-20-0
Sodium Thiosulfate, 0.100 N Solution 7732-18-5
Ethanol SDA1, Anhydrous 64-17-5
1-O-Octyl-beta-D-glucopyranoside 29836-26-8
Soap solution - Wanklyn 143-18-0
1-Octane sulfonic acid, sodium salt 5324-84-5
This is a test. 67-56-1
Polyurethane foam (polymer A) 0-00-0
Tetrabromocatechol, 96% 488-47-1
Alpha-Bromo-4-Nitro-O-Cresol 772-33-8
Trimethyl-ethoxysilane 7732-18-5
Diethyl citrate, tech. 7553-56-2
alpha-Cyano-3-hydroxycinnamic acid, 99% 54673-07-3
2,4,6-Triphenyl-s-triazine 493-77-6
Zinc Metal (Granular and Mossy) 7440-66-6
Magnesium Powder 7439-95-4
Geometric Data Fixative (BSI) 67-56-1
Isopropyl-dimethyl-chlorosilane 67-63-0
Wright Stain 67-56-1
Lithium diisopropylamide, 2M solution in THF/n-heptane 100-41-4
Gastrak 4 Molar Potassium Chloride (BSI) 7447-40-7
1-Acetyl-2-Phenylhydrazine, 98% 114-83-0
Sulfosalicylic acid 20% 97-05-2
Hydrochloric Acid 4N, 5N and 6N 7647-01-0
Hydrochloric Acid 0.01 N to 1.0N 7647-01-0
Hydrochloric Acid 0.1 N 90-43-7
Acetic acid 1N 64-19-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net