Search   
MSDS 
:
 Hydrochloric Acid 0.1 N
CAS 
:
 90-43-7
SYNONYMS 
:
 Muriatic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 90-43-7 |Dowicide B | <1.0 | 201-993-5 |
|----------------|--------------------------------------|----------|-----------|
| 7647-01-0 |Hydrogen chloride | 0.365 % | 231-595-7 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Discard contaminated clothing in a
manner which limits further exposure. Flush skin with plenty of soap
and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Large spills may be neutralized
with dilute alkaline solutions of soda ash (sodium carbonate,
Na2CO3), or lime (calcium oxide, CaO). Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get in eyes,
on skin, or on clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 90-43-7:

CAS# 7647-01-0:
United Kingdom, WEL - TWA: 1 ppm TWA (aerosol mist and gas); 2 mg
TWA (aerosol mist and gas)
United Kingdom, WEL - STEL: 5 ppm STEL (aerosol mist and gas); 8
mg/m3 STEL (aerosol mist and gas)
United States OSHA: ; 5 ppm Ceiling; 7 mg/m3 Ceiling
Belgium - TWA: 5 ppm VLE; 8 mg/m3 VLE
Belgium - STEL: 10 ppm VLE; 15 mg/m3 VLE
France - VLE: 5 ppm VLE; 7.5 mg/m3 VLE
Germany: 8 mg/m3 TWA
Japan: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Malaysia: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Netherlands: 10 ppm STEL; 15 mg/m3 STEL
Netherlands: 5 ppm MAC; 8 mg/m3 MAC
Russia: 5 mg/m3 TWA
Spain: 5 ppm VLA-ED; 7.6 mg/m3 VLA-ED
Spain: 10 ppm VLA-EC; 15 mg/m3 VLA-EC
CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Pungent odor.
pH: 1
Vapor Pressure: 14 mm Hg @ 20 C
Viscosity: Not available.
Boiling Point: 212 deg F
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Complete in water.
Specific Gravity/Density: 1.0-1.2 (Water=1)
Molecular Formula: Not applicable.
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, contact with water.
Incompatibilities with Other Materials:
Alcohols and glycols (e.g. butyl alcohol, ethanol, methanol, ethylene
glycol), aldehydes (e.g. acetaldehyde, acrolein, chloral hydrate,
formaldehyde), amides (e.g. butyramide, diethyltoluamide, dimethyl
formamide), amines (aliphatic and aromatic, e.g. dimethyl amine,
propylamine, pyridine, triethylamine), azo, diazo, and hydrazines
(e.g. dimethyl hydrazine, hydrazine, methyl hydrazine), carbamates
(e.g. carbanolate, carbofuran), caustics (e.g. ammonia, ammonium
hydroxide, calcium hydroxide, potassium hydroxide, sodium hydroxide),
cyanides (e.g. potassium cyanide, sodium cyanide), dithiocarbamates
(e.g. ferbam, maneb, metham, thiram), esters (e.g. butyl acetate,
ethyl acetate, propyl formate), ethers (e.g. dioxane, furfuran,
tetrahydrofuran (THF)), fluorides (inorganic, e.g. ammonium fluoride,
calcium fluoride, cesium fluoride), halogenated organics (e.g.
dibromoethane, hexachlorobenzene, methyl chloride,
trichloroethylene), isocyanates (e.g. methyl isocyanate), ketones
(e.g. acetone, acetophenone, MEK, MIBK), mercaptans and other organic
sulfides (e.g. butyl mercaptan, carbon disulfide, methanethiol),
metals (alkali and alkaline, e.g. cesium, potassium, sodium), metals
as powders (e.g. hafnium, raney nickel), metals as non-powders (e.g.
brass, bronze, iron), metals and metal compounds (toxic, e.g.
beryllium, lead acetate, nickel carbonyl, tetraethyl lead), nitrides
(e.g. potassium nitride, sodium nitride), nitriles (e.g.
acetonitrile, methyl cyanide), hydrocarbons (aliphatic, unsaturated,
e.g. cyclopentene, ethylene, heptene), peroxides and hydroperoxides
(organic, e.g. acetyl peroxide, benzoyl peroxide, butyl peroxide,
methyl ethyl ketone peroxide), phenols and cresols (e.g. carbolic
acid, creosote, cresol, phenol, resorcinol), organophosphates,
phosphothioates (e.g. methylparathion, parathion, phorate,
thionazin), sulfides (inorganic, e.g. ferric sulfide, lead sulfide,
sodium sulfide), epoxides (e.g. butyl glycidyl ether), combustible
and flammable materials (e.g..
Hazardous Decomposition Products:
Hydrogen chloride, hydrogen gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 90-43-7: DV5775000
CAS# 7647-01-0: MW4025000 MW4031000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 90-43-7: Draize test, rabbit, eye: 50 ug/24H Severe; Draize
test, rabbit, skin: 250 mg; Draize test, rabbit, skin: 20 mg/24H
Moderate; Oral, mouse: LD50 = 1050 mg/kg; Oral, rat: LD50 = 2 gm/kg;
Oral, rat: LD50 = 2700 mg/kg.
CAS# 7647-01-0: Inhalation, mouse: LC50 = 1108 ppm/1H; Inhalation,
mouse: LC50 = 20487 mg/m3/5M; Inhalation, mouse: LC50 = 3940
mg/m3/30M; Inhalation, mouse: LC50 = 8300 mg/m3/30M; Inhalation,
rat: LC50 = 3124 ppm/1H; Inhalation, rat: LC50 = 60938 mg/m3/5M;
Inhalation, rat: LC50 = 7004 mg/m3/30M; Inhalation, rat: LC50 =
45000 mg/m3/5M; Inhalation, rat: LC50 = 8300 mg/m3/30M; Oral,
rabbit: LD50 = 900 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Dowicide B -
California: carcinogen, initial date 8/4/00
Hydrogen chloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Trout LC100=10 mg/l/24H Shrimp LC50=100-330 ppm Starfish LC50=100-330
mg/l/48H Shore crab LC50=240 mg/l/48H Chronic plant toxicity=100 ppm
Fish-toxicity LC50:862 mg/l

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
USA RQ: CAS# 7647-01-0: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 90-43-7: 2
CAS# 7647-01-0: 1
CAS# 7732-18-5: No information available.
Canada
CAS# 90-43-7 is listed on Canada's DSL List.
CAS# 7647-01-0 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 90-43-7 is listed on Canada's Ingredient Disclosure List.
CAS# 7647-01-0 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 90-43-7 is listed on the TSCA inventory.
CAS# 7647-01-0 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 36/37/38 Irritating to eyes, respiratory system and
skin.
MSDS Creation Date: 10/13/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Hexadien-1-Ol, 99%, Mixture of Isomers 111-28-4
Benzalkoniumchloride, 50 wt% Aq.Solution 7732-18-5
3-Bromo-1,1,1-trifluoro-2-propanol, 96% (g c) 88378-50-1
Glutaraldehyde sodium bisulfite addition compound, 95% 28959-35-5
4-Bromobenzoyl chloride, 98% 586-75-4
4,4'-Methylenedianiline, 99% (Titr.) 101-77-9
2-Methylcinnamic acid, 99% 2373-76-4
Platinum black, 98% Pt 7440-06-4
Rubidium nitrate, 99.8% 13126-12-0
Calcium Hypochlorite 7778-54-3
cis-2-Amino-1-cyclopentanecarboxylic acid hydrochloride hemihydrate 7664-93-9
Dichlorodiphenylmethane, 99% 2051-90-3
Tryptone
2-Butene-1,4-Diol, 97% Cis 6117-80-2
Boric acid, 2 % w/v aqueous solution 7732-18-5
Molecular Sieves, 5A, Powder, Max. Grain-Size 50 Micron 0-00-1
Heptaldehyde, 96% (gc) 111-71-7
Alpha-Amylase 9000-90-2
Lead, 1000 ppm, standard metal solution in approx. M nitric acid 7439-92-1
2-Picoline, 98% 109-06-8
Vinyl sulfone,97% stabilized with 500 ppm hydroquinone 77-77-0
Potassium Chloride, saturated solution 7447-40-7
Potassium Chloride 3 M-4 M Solutions 7447-40-7
Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric 333-20-0
Sodium Thiosulfate, 0.100 N Solution 7732-18-5
Ethanol SDA1, Anhydrous 64-17-5
1-O-Octyl-beta-D-glucopyranoside 29836-26-8
Soap solution - Wanklyn 143-18-0
1-Octane sulfonic acid, sodium salt 5324-84-5
This is a test. 67-56-1
Polyurethane foam (polymer A) 0-00-0
Tetrabromocatechol, 96% 488-47-1
Alpha-Bromo-4-Nitro-O-Cresol 772-33-8
Trimethyl-ethoxysilane 7732-18-5
Diethyl citrate, tech. 7553-56-2
alpha-Cyano-3-hydroxycinnamic acid, 99% 54673-07-3
2,4,6-Triphenyl-s-triazine 493-77-6
Zinc Metal (Granular and Mossy) 7440-66-6
Magnesium Powder 7439-95-4
Geometric Data Fixative (BSI) 67-56-1
Isopropyl-dimethyl-chlorosilane 67-63-0
Wright Stain 67-56-1
Lithium diisopropylamide, 2M solution in THF/n-heptane 100-41-4
Gastrak 4 Molar Potassium Chloride (BSI) 7447-40-7
1-Acetyl-2-Phenylhydrazine, 98% 114-83-0
Sulfosalicylic acid 20% 97-05-2
Hydrochloric Acid 4N, 5N and 6N 7647-01-0
Hydrochloric Acid 0.01 N to 1.0N 7647-01-0
Hydrochloric Acid 0.1 N 90-43-7
Acetic acid 1N 64-19-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net