Search   
MSDS 
:
 Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric
CAS 
:
 333-20-0
SYNONYMS 
:
 Potassium isothiocyanate; potassium thiocyanide; potassium rhodanate;     potassium rhodacyanate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 333-20-0 |Potassium thiocyanate | 0.97 | 206-370-1 |
|----------------|--------------------------------------|----------|-----------|
| 7487-94-7 |Mercuric chloride | 0.001 | 231-299-8 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | 99.029 | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XN
Risk Phrases: 21/22 32

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Contact with acids
liberates very toxic gas.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with skin and eyes.
Storage:
Keep from contact with oxidizing materials.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 333-20-0:
United States OSHA: 5 mg/m3 TWA (listed under Cyanide anion).
Germany: (listed as cyanide anion): Skin absorber
Netherlands: (listed as cyanide anion): 5 mg/m3 MAC (as CN)
CAS# 7487-94-7:
United States OSHA: 0.1 mg/m3 Ceiling (listed under Mercury, ary
and inorganic compounds).
Belgium - TWA: (listed as mercury, aryl and inorganic compounds):
mg/m3 VLE (as Hg)
France - VME: (listed as mercury, aryl and inorganic compounds):
mg/m3 VME (as Hg)
Germany: (listed as mercury, aryl and inorganic compounds): 0.1 m
VME (as Hg)
Germany: (listed as mercury inorganic compounds): Skin absorber
Malaysia: (listed as mercury, aryl and inorganic compounds): 0.1
mg/m3 TWA (as Hg)
Netherlands: (listed as mercury inorganic compounds): 0.15 mg/m3
Netherlands: (listed as mercury inorganic compounds): 0.05 mg/m3
Russia: (listed as mercury inorganic compounds): 0.2 mg/m3 TWA (a
Hg)
Russia: (listed as mercury inorganic compounds): 0.05 mg/m3 STEL
Hg)
Spain: (listed as mercury, aryl and inorganic compounds): 0.1 mg/
VLA-ED (as Hg)
CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: KCNS
Molecular Weight: Not available.

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light.
Incompatibilities with Other Materials:
Strong oxidizing agents, light and strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide,
nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 333-20-0: XL1925000
CAS# 7487-94-7: OV9100000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 333-20-0: Oral, mouse: LD50 = 594 mg/kg; Oral, mouse: LD50 =
590 mg/kg; Oral, rat: LD50 = 854 mg/kg.
CAS# 7487-94-7: Draize test, rabbit, eye: 50 ug/24H Severe; Draize
test, rabbit, skin: 500 mg/24H Severe; Oral, mouse: LD50 = 6 mg/kg;
Oral, rat: LD50 = 1 mg/kg; Skin, rat: LD50 = 41 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Potassium thiocyanate -
Not listed by ACGIH, IARC, or NTP.
Mercuric chloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 32 Contact with acids liberates very toxic gas.
Safety Phrases:
S 2 Keep out of reach of children.
S 13 Keep away from food, drink and animal feeding
stuffs.
WGK (Water Danger/Protection)
CAS# 333-20-0: No information available.
CAS# 7487-94-7: 3
CAS# 7732-18-5: No information available.
Canada
CAS# 333-20-0 is listed on Canada's DSL List.
CAS# 7487-94-7 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 333-20-0 is not listed on Canada's Ingredient Disclosure List.
CAS# 7487-94-7 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 333-20-0 is listed on the TSCA inventory.
CAS# 7487-94-7 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 12/12/1997 Revision #3 Date: 9/29/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Hexadien-1-Ol, 99%, Mixture of Isomers 111-28-4
Benzalkoniumchloride, 50 wt% Aq.Solution 7732-18-5
3-Bromo-1,1,1-trifluoro-2-propanol, 96% (g c) 88378-50-1
Glutaraldehyde sodium bisulfite addition compound, 95% 28959-35-5
4-Bromobenzoyl chloride, 98% 586-75-4
4,4'-Methylenedianiline, 99% (Titr.) 101-77-9
2-Methylcinnamic acid, 99% 2373-76-4
Platinum black, 98% Pt 7440-06-4
Rubidium nitrate, 99.8% 13126-12-0
Calcium Hypochlorite 7778-54-3
cis-2-Amino-1-cyclopentanecarboxylic acid hydrochloride hemihydrate 7664-93-9
Dichlorodiphenylmethane, 99% 2051-90-3
Tryptone
2-Butene-1,4-Diol, 97% Cis 6117-80-2
Boric acid, 2 % w/v aqueous solution 7732-18-5
Molecular Sieves, 5A, Powder, Max. Grain-Size 50 Micron 0-00-1
Heptaldehyde, 96% (gc) 111-71-7
Alpha-Amylase 9000-90-2
Lead, 1000 ppm, standard metal solution in approx. M nitric acid 7439-92-1
2-Picoline, 98% 109-06-8
Vinyl sulfone,97% stabilized with 500 ppm hydroquinone 77-77-0
Potassium Chloride, saturated solution 7447-40-7
Potassium Chloride 3 M-4 M Solutions 7447-40-7
Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric 333-20-0
Sodium Thiosulfate, 0.100 N Solution 7732-18-5
Ethanol SDA1, Anhydrous 64-17-5
1-O-Octyl-beta-D-glucopyranoside 29836-26-8
Soap solution - Wanklyn 143-18-0
1-Octane sulfonic acid, sodium salt 5324-84-5
This is a test. 67-56-1
Polyurethane foam (polymer A) 0-00-0
Tetrabromocatechol, 96% 488-47-1
Alpha-Bromo-4-Nitro-O-Cresol 772-33-8
Trimethyl-ethoxysilane 7732-18-5
Diethyl citrate, tech. 7553-56-2
alpha-Cyano-3-hydroxycinnamic acid, 99% 54673-07-3
2,4,6-Triphenyl-s-triazine 493-77-6
Zinc Metal (Granular and Mossy) 7440-66-6
Magnesium Powder 7439-95-4
Geometric Data Fixative (BSI) 67-56-1
Isopropyl-dimethyl-chlorosilane 67-63-0
Wright Stain 67-56-1
Lithium diisopropylamide, 2M solution in THF/n-heptane 100-41-4
Gastrak 4 Molar Potassium Chloride (BSI) 7447-40-7
1-Acetyl-2-Phenylhydrazine, 98% 114-83-0
Sulfosalicylic acid 20% 97-05-2
Hydrochloric Acid 4N, 5N and 6N 7647-01-0
Hydrochloric Acid 0.01 N to 1.0N 7647-01-0
Hydrochloric Acid 0.1 N 90-43-7
Acetic acid 1N 64-19-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net