**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 54673-07-3 |alpha-Cyano-3-hydroxycinnamic acid | 99 | 259-289-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. If breathing has ceased
apply artificial respiration using oxygen and a suitable mechanical
device such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Keep container tightly
closed.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 54673-07-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: Yellow Powder
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 232 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H7NO3
Molecular Weight: 189.17
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, oxidizers.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong acids - strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 54673-07-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
alpha-Cyano-3-hydroxycinnamic acid -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 54673-07-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 54673-07-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 54673-07-3 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 10/17/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,4-Hexadien-1-Ol, 99%, Mixture of Isomers
| 111-28-4 |
|
Benzalkoniumchloride, 50 wt% Aq.Solution
| 7732-18-5 |
|
3-Bromo-1,1,1-trifluoro-2-propanol, 96% (g c)
| 88378-50-1 |
|
Glutaraldehyde sodium bisulfite addition compound, 95%
| 28959-35-5 |
|
4-Bromobenzoyl chloride, 98%
| 586-75-4 |
|
4,4'-Methylenedianiline, 99% (Titr.)
| 101-77-9 |
|
2-Methylcinnamic acid, 99%
| 2373-76-4 |
|
Platinum black, 98% Pt
| 7440-06-4 |
|
Rubidium nitrate, 99.8%
| 13126-12-0 |
|
Calcium Hypochlorite
| 7778-54-3 |
|
cis-2-Amino-1-cyclopentanecarboxylic acid hydrochloride hemihydrate
| 7664-93-9 |
|
Dichlorodiphenylmethane, 99%
| 2051-90-3 |
|
Tryptone
| |
|
2-Butene-1,4-Diol, 97% Cis
| 6117-80-2 |
|
Boric acid, 2 % w/v aqueous solution
| 7732-18-5 |
|
Molecular Sieves, 5A, Powder, Max. Grain-Size 50 Micron
| 0-00-1 |
|
Heptaldehyde, 96% (gc)
| 111-71-7 |
|
Alpha-Amylase
| 9000-90-2 |
|
Lead, 1000 ppm, standard metal solution in approx. M nitric acid
| 7439-92-1 |
|
2-Picoline, 98%
| 109-06-8 |
|
Vinyl sulfone,97% stabilized with 500 ppm hydroquinone
| 77-77-0 |
|
Potassium Chloride, saturated solution
| 7447-40-7 |
|
Potassium Chloride 3 M-4 M Solutions
| 7447-40-7 |
|
Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric
| 333-20-0 |
|
Sodium Thiosulfate, 0.100 N Solution
| 7732-18-5 |
|
Ethanol SDA1, Anhydrous
| 64-17-5 |
|
1-O-Octyl-beta-D-glucopyranoside
| 29836-26-8 |
|
Soap solution - Wanklyn
| 143-18-0 |
|
1-Octane sulfonic acid, sodium salt
| 5324-84-5 |
|
This is a test.
| 67-56-1 |
|
Polyurethane foam (polymer A)
| 0-00-0 |
|
Tetrabromocatechol, 96%
| 488-47-1 |
|
Alpha-Bromo-4-Nitro-O-Cresol
| 772-33-8 |
|
Trimethyl-ethoxysilane
| 7732-18-5 |
|
Diethyl citrate, tech.
| 7553-56-2 |
|
alpha-Cyano-3-hydroxycinnamic acid, 99%
| 54673-07-3 |
|
2,4,6-Triphenyl-s-triazine
| 493-77-6 |
|
Zinc Metal (Granular and Mossy)
| 7440-66-6 |
|
Magnesium Powder
| 7439-95-4 |
|
Geometric Data Fixative (BSI)
| 67-56-1 |
|
Isopropyl-dimethyl-chlorosilane
| 67-63-0 |
|
Wright Stain
| 67-56-1 |
|
Lithium diisopropylamide, 2M solution in THF/n-heptane
| 100-41-4 |
|
Gastrak 4 Molar Potassium Chloride (BSI)
| 7447-40-7 |
|
1-Acetyl-2-Phenylhydrazine, 98%
| 114-83-0 |
|
Sulfosalicylic acid 20%
| 97-05-2 |
|
Hydrochloric Acid 4N, 5N and 6N
| 7647-01-0 |
|
Hydrochloric Acid 0.01 N to 1.0N
| 7647-01-0 |
|
Hydrochloric Acid 0.1 N
| 90-43-7 |
|
Acetic acid 1N
| 64-19-7 |
|
|