Search   
MSDS 
:
 Heptaldehyde, 96% (gc)
CAS 
:
 111-71-7
SYNONYMS 
:
 Heptanal; Enanthaldehyde; Oeranthol.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111-71-7 |Heptaldehyde | 96.0 | 203-898-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and
skin.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation. Vapors may cause dizziness
or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water. Cool containers with flooding quantities of water until well
after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Handle under an inert atmosphere. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Keep containers tightly
closed. Store under nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-71-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: oily, colorless
Odor: none reported - penetrating odor - fruity odor
pH: Not available.
Vapor Pressure: 3 hPa @ 20 C
Viscosity: 0.977 cP 15 deg C
Boiling Point: 153 deg C @ 760.00mm Hg
Freezing/Melting Point: -43.00 - - 0.00 deg C
Autoignition Temperature: Not available.
Flash Point: 35 deg C ( 95.00 deg F)
Explosion Limits, lower: 1.10 vol %
Explosion Limits, upper: 5.20 vol %
Decomposition Temperature:
Solubility in water: Slightly soluble in water
Specific Gravity/Density: .8500g/cm3
Molecular Formula: C7H14O
Molecular Weight: 114.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, ignition sources, excess heat, strong
oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, strong acids, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, acrid smoke and fumes.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 111-71-7: MI6900000
LD50/LC50:
CAS# 111-71-7: Draize test, rabbit, eye: 100 uL Severe; Inhalation,
rat: LC50 = >18400 mg/m3/4H; Oral, mouse: LD50 = 3200 mg/kg; Oral,
rat: LD50 = 3200 mg/kg; Oral, rat: LD50 = 5000 mg/kg; Skin, rabbit:
LD50 = >5 gm/kg.
Carcinogenicity:
Heptaldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 36 Wear suitable protective clothing.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 111-71-7: No information available.
Canada
CAS# 111-71-7 is listed on Canada's DSL List.
CAS# 111-71-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-71-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/07/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,4-Hexadien-1-Ol, 99%, Mixture of Isomers 111-28-4
Benzalkoniumchloride, 50 wt% Aq.Solution 7732-18-5
3-Bromo-1,1,1-trifluoro-2-propanol, 96% (g c) 88378-50-1
Glutaraldehyde sodium bisulfite addition compound, 95% 28959-35-5
4-Bromobenzoyl chloride, 98% 586-75-4
4,4'-Methylenedianiline, 99% (Titr.) 101-77-9
2-Methylcinnamic acid, 99% 2373-76-4
Platinum black, 98% Pt 7440-06-4
Rubidium nitrate, 99.8% 13126-12-0
Calcium Hypochlorite 7778-54-3
cis-2-Amino-1-cyclopentanecarboxylic acid hydrochloride hemihydrate 7664-93-9
Dichlorodiphenylmethane, 99% 2051-90-3
Tryptone
2-Butene-1,4-Diol, 97% Cis 6117-80-2
Boric acid, 2 % w/v aqueous solution 7732-18-5
Molecular Sieves, 5A, Powder, Max. Grain-Size 50 Micron 0-00-1
Heptaldehyde, 96% (gc) 111-71-7
Alpha-Amylase 9000-90-2
Lead, 1000 ppm, standard metal solution in approx. M nitric acid 7439-92-1
2-Picoline, 98% 109-06-8
Vinyl sulfone,97% stabilized with 500 ppm hydroquinone 77-77-0
Potassium Chloride, saturated solution 7447-40-7
Potassium Chloride 3 M-4 M Solutions 7447-40-7
Potassium thiocyanate, 0.1N solution stabilized with 10 ppm mercuric 333-20-0
Sodium Thiosulfate, 0.100 N Solution 7732-18-5
Ethanol SDA1, Anhydrous 64-17-5
1-O-Octyl-beta-D-glucopyranoside 29836-26-8
Soap solution - Wanklyn 143-18-0
1-Octane sulfonic acid, sodium salt 5324-84-5
This is a test. 67-56-1
Polyurethane foam (polymer A) 0-00-0
Tetrabromocatechol, 96% 488-47-1
Alpha-Bromo-4-Nitro-O-Cresol 772-33-8
Trimethyl-ethoxysilane 7732-18-5
Diethyl citrate, tech. 7553-56-2
alpha-Cyano-3-hydroxycinnamic acid, 99% 54673-07-3
2,4,6-Triphenyl-s-triazine 493-77-6
Zinc Metal (Granular and Mossy) 7440-66-6
Magnesium Powder 7439-95-4
Geometric Data Fixative (BSI) 67-56-1
Isopropyl-dimethyl-chlorosilane 67-63-0
Wright Stain 67-56-1
Lithium diisopropylamide, 2M solution in THF/n-heptane 100-41-4
Gastrak 4 Molar Potassium Chloride (BSI) 7447-40-7
1-Acetyl-2-Phenylhydrazine, 98% 114-83-0
Sulfosalicylic acid 20% 97-05-2
Hydrochloric Acid 4N, 5N and 6N 7647-01-0
Hydrochloric Acid 0.01 N to 1.0N 7647-01-0
Hydrochloric Acid 0.1 N 90-43-7
Acetic acid 1N 64-19-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net