**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1112-66-9 |Tetraallylsilane | ca 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
Poison by ingestion. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. The toxicological properties of this
substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Toxic if inhaled.
Aspiration may lead to pulmonary edema. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Combustible liquid. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. Containers may explode when heated.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Cool containers with
flooding quantities of water until well after fire is out. Use water
spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1112-66-9:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 90 deg C @ 3.00mmHg
Freezing/Melting Point: 80 deg C
Autoignition Temperature: Not available.
Flash Point: 77 deg C ( 170.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8310g/cm3
Molecular Formula: (H2C=CHCH2)4Si
Molecular Weight: 192.38
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1112-66-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetraallylsilane -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 28 After contact with skin, wash immediately
with...
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1112-66-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1112-66-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1112-66-9 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/03/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Octakis-6-Bromo-6-Deoxy-??5-Cyclodextrin
| 53784-84-2 |
|
Octakis-6-Iodo-6-Deoxy-??5-Cyclodextrin
| 168296-33-1 |
|
4-Chromanol 96%
| 1481-93-2 |
|
Octakis-6-(Dimethyl-Tert-Butylsilyl)-6-Deoxy-??5-Cyclodextrin
| 0-01-1 |
|
Diphenyl phthalate
| 84-62-8 |
|
DL-4-Chlorophenylalanine Methyl Ester Hydrochloride, 99%
| 14173-40-1 |
|
1H-Benzotriazole, 98%
| 95-14-7 |
|
m-Cresol, 95%
| 108-39-4 |
|
Thiodiglycolic Acid,98%
| 123-93-3 |
|
n-Acetyl-s-(2-hydroxyethyl)-l-cysteine
| 15060-26-1 |
|
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR)
| 98258-72-1 |
|
Barium oxide
| 1304-28-5 |
|
Zinc Sulfide, Pieces, 3-12 mm, 99.9%
| 1314-98-3 |
|
Bromobenzene-d5, 99.5 atom% D
| 4165-57-5 |
|
Toluene-d8, 99.5+ atom % D
| 2037-26-5 |
|
1-Butanol-d10, packaged in ampules, 99+ atom % D
| 71-36-3 |
|
Ethylbenzene-d10, packaged in ampules, 99+ atom% D
| 25837-05-2 |
|
Mesitylene-d12, packaged in ampule, 98 atom% D
| 69441-16-3 |
|
Methylcyclohexane-d14, packaged in ampules, 99 atom % D
| 108-87-2 |
|
Methyl-d3 methacrylate-d5, stabilized
| 80-62-6 |
|
Aniline-d7, 99 atom% D
| 4165-61-1 |
|
Benzyl chloroformate, 50 wt% solution in toluene
| 108-88-3 |
|
Nitrobenzene-D5, 99.5 Atom% D
| 4165-60-0 |
|
1,1,2,2-Tetrachloroethane-d2, 99.5+ atom% D
| 33685-54-0 |
|
4,4'-Ethylenedianiline, 95%
| 621-95-4 |
|
Bromoform-d, stabilized with copper, 99 atom% D
| 75-25-2 |
|
1,2-Bis(dichlorophosphino)ethane, 97%
| 28240-69-9 |
|
N-Benzyl-4-cyano-4-(1-piperidino)-piperidine
| 84254-97-7 |
|
1,3,6,8-Pyrenetetrasulfonic Acid Tetrasodium Salt, 85+% (UV-VIS)
| 59572-10-0 |
|
Dittmer reagent, 95%
| |
|
Isoquinoline, 97%
| 119-65-3 |
|
Alkylbenzene sulfonic acid, mixture of C10-C13 isomers
| |
|
Methyltriallylsilane
| 1112-91-0 |
|
Tetraallylsilane
| 1112-66-9 |
|
2-Ethoxy-2-(2'-phenylsulfonylethyl)-1,3-dioxolane
| 149099-23-0 |
|
Sodium Hydride, Dispersion in Mineral Oil, 75%
| 7646-69-7 |
|
Hexaphenyldisilane
| 1450-23-3 |
|
Citronellal (pract), 93% (gc)
| 106-23-0 |
|
Hydriodic Acid, 57 Wt.% Aq. Solution, Distilled, Unstabilized
| 7732-18-5 |
|
Cyclopentylamine, 99+%
| 1003-03-8 |
|
(Bromomethyl)triphenylphosphonium bromide, 98%
| 1034-49-7 |
|
Methyl trans-3-methoxyacrylate, 95%
| 5788-17-0 |
|
Benzyltriphenylphosphonium borohydride, 98%
| 18117-29-8 |
|
2-Methyl-6-phenylbenzothiazole, 97%
| 107559-02-4 |
|
Ethylenediaminetetraacetic acid ferric sodium salt, trihydrate, 98%
| 15708-41-5 |
|
2,4-Dichlorobenzyl Alcohol, 99%
| 1777-82-8 |
|
Diethyldithiocarbamic Acid Diethylammonium Salt, 98% (Titr.)
| 1518-58-7 |
|
Hydriodic acid, reagent ACS, 55% in water, without stabilizer
| 10034-85-2 |
|
2,2,6,6-Tetramethyl-4-Piperidone Hydrochloride, 97%
| 33973-59-0 |
|
Cellulose Acetate Hydrogen Phthalate, Acetyl Content 17.0-22.0%
| 9004-38-0 |
|
|