Search   
MSDS 
:
 Methyl trans-3-methoxyacrylate, 95%
CAS 
:
 5788-17-0
SYNONYMS 
:
 2-Propenoic acid, 3-methoxy-, methyl ester, (E)-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5788-17-0 |Methyl trans-3-methoxyacrylate | 95 | 412-900-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
May cause sensitization by skin contact.

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears).
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation. May cause headache. May cause
nausea and possible vomiting.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, immediately flush skin with soap and plenty of
water. Remove contaminated clothing and shoes. Get medical aid if
symptoms occur. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Fire or excessive heat may result in violent
rupture of the container due to bulk polymerization. Combustible
liquid and vapor.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Use
only with adequate ventilation. Keep away from heat and flame. Avoid
breathing vapor or mist.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Keep refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5788-17-0:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless - light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 56 deg C @ 18 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 62 deg C ( 143.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0800 g/cm3
Molecular Formula: C5H8O3
Molecular Weight: 116.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
May polymerize.
Conditions to Avoid:
High temperatures, ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5788-17-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl trans-3-methoxyacrylate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 24 Avoid contact with skin.
S 37 Wear suitable gloves.
WGK (Water Danger/Protection)
CAS# 5788-17-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5788-17-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5788-17-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/14/1998 Revision #3 Date: 6/06/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Octakis-6-Bromo-6-Deoxy-??5-Cyclodextrin 53784-84-2
Octakis-6-Iodo-6-Deoxy-??5-Cyclodextrin 168296-33-1
4-Chromanol 96% 1481-93-2
Octakis-6-(Dimethyl-Tert-Butylsilyl)-6-Deoxy-??5-Cyclodextrin 0-01-1
Diphenyl phthalate 84-62-8
DL-4-Chlorophenylalanine Methyl Ester Hydrochloride, 99% 14173-40-1
1H-Benzotriazole, 98% 95-14-7
m-Cresol, 95% 108-39-4
Thiodiglycolic Acid,98% 123-93-3
n-Acetyl-s-(2-hydroxyethyl)-l-cysteine 15060-26-1
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR) 98258-72-1
Barium oxide 1304-28-5
Zinc Sulfide, Pieces, 3-12 mm, 99.9% 1314-98-3
Bromobenzene-d5, 99.5 atom% D 4165-57-5
Toluene-d8, 99.5+ atom % D 2037-26-5
1-Butanol-d10, packaged in ampules, 99+ atom % D 71-36-3
Ethylbenzene-d10, packaged in ampules, 99+ atom% D 25837-05-2
Mesitylene-d12, packaged in ampule, 98 atom% D 69441-16-3
Methylcyclohexane-d14, packaged in ampules, 99 atom % D 108-87-2
Methyl-d3 methacrylate-d5, stabilized 80-62-6
Aniline-d7, 99 atom% D 4165-61-1
Benzyl chloroformate, 50 wt% solution in toluene 108-88-3
Nitrobenzene-D5, 99.5 Atom% D 4165-60-0
1,1,2,2-Tetrachloroethane-d2, 99.5+ atom% D 33685-54-0
4,4'-Ethylenedianiline, 95% 621-95-4
Bromoform-d, stabilized with copper, 99 atom% D 75-25-2
1,2-Bis(dichlorophosphino)ethane, 97% 28240-69-9
N-Benzyl-4-cyano-4-(1-piperidino)-piperidine 84254-97-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetrasodium Salt, 85+% (UV-VIS) 59572-10-0
Dittmer reagent, 95%
Isoquinoline, 97% 119-65-3
Alkylbenzene sulfonic acid, mixture of C10-C13 isomers
Methyltriallylsilane 1112-91-0
Tetraallylsilane 1112-66-9
2-Ethoxy-2-(2'-phenylsulfonylethyl)-1,3-dioxolane 149099-23-0
Sodium Hydride, Dispersion in Mineral Oil, 75% 7646-69-7
Hexaphenyldisilane 1450-23-3
Citronellal (pract), 93% (gc) 106-23-0
Hydriodic Acid, 57 Wt.% Aq. Solution, Distilled, Unstabilized 7732-18-5
Cyclopentylamine, 99+% 1003-03-8
(Bromomethyl)triphenylphosphonium bromide, 98% 1034-49-7
Methyl trans-3-methoxyacrylate, 95% 5788-17-0
Benzyltriphenylphosphonium borohydride, 98% 18117-29-8
2-Methyl-6-phenylbenzothiazole, 97% 107559-02-4
Ethylenediaminetetraacetic acid ferric sodium salt, trihydrate, 98% 15708-41-5
2,4-Dichlorobenzyl Alcohol, 99% 1777-82-8
Diethyldithiocarbamic Acid Diethylammonium Salt, 98% (Titr.) 1518-58-7
Hydriodic acid, reagent ACS, 55% in water, without stabilizer 10034-85-2
2,2,6,6-Tetramethyl-4-Piperidone Hydrochloride, 97% 33973-59-0
Cellulose Acetate Hydrogen Phthalate, Acetyl Content 17.0-22.0% 9004-38-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net