Search   
MSDS 
:
 Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR)
CAS 
:
 98258-72-1
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 98258-72-1 |Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) B| 98+% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Use with adequate ventilation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 98258-72-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 119.00 - 120.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: negligible
Specific Gravity/Density:
Molecular Formula: C17H14O3
Molecular Weight: 266.29

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 98258-72-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 98258-72-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 98258-72-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 98258-72-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Octakis-6-Bromo-6-Deoxy-??5-Cyclodextrin 53784-84-2
Octakis-6-Iodo-6-Deoxy-??5-Cyclodextrin 168296-33-1
4-Chromanol 96% 1481-93-2
Octakis-6-(Dimethyl-Tert-Butylsilyl)-6-Deoxy-??5-Cyclodextrin 0-01-1
Diphenyl phthalate 84-62-8
DL-4-Chlorophenylalanine Methyl Ester Hydrochloride, 99% 14173-40-1
1H-Benzotriazole, 98% 95-14-7
m-Cresol, 95% 108-39-4
Thiodiglycolic Acid,98% 123-93-3
n-Acetyl-s-(2-hydroxyethyl)-l-cysteine 15060-26-1
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR) 98258-72-1
Barium oxide 1304-28-5
Zinc Sulfide, Pieces, 3-12 mm, 99.9% 1314-98-3
Bromobenzene-d5, 99.5 atom% D 4165-57-5
Toluene-d8, 99.5+ atom % D 2037-26-5
1-Butanol-d10, packaged in ampules, 99+ atom % D 71-36-3
Ethylbenzene-d10, packaged in ampules, 99+ atom% D 25837-05-2
Mesitylene-d12, packaged in ampule, 98 atom% D 69441-16-3
Methylcyclohexane-d14, packaged in ampules, 99 atom % D 108-87-2
Methyl-d3 methacrylate-d5, stabilized 80-62-6
Aniline-d7, 99 atom% D 4165-61-1
Benzyl chloroformate, 50 wt% solution in toluene 108-88-3
Nitrobenzene-D5, 99.5 Atom% D 4165-60-0
1,1,2,2-Tetrachloroethane-d2, 99.5+ atom% D 33685-54-0
4,4'-Ethylenedianiline, 95% 621-95-4
Bromoform-d, stabilized with copper, 99 atom% D 75-25-2
1,2-Bis(dichlorophosphino)ethane, 97% 28240-69-9
N-Benzyl-4-cyano-4-(1-piperidino)-piperidine 84254-97-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetrasodium Salt, 85+% (UV-VIS) 59572-10-0
Dittmer reagent, 95%
Isoquinoline, 97% 119-65-3
Alkylbenzene sulfonic acid, mixture of C10-C13 isomers
Methyltriallylsilane 1112-91-0
Tetraallylsilane 1112-66-9
2-Ethoxy-2-(2'-phenylsulfonylethyl)-1,3-dioxolane 149099-23-0
Sodium Hydride, Dispersion in Mineral Oil, 75% 7646-69-7
Hexaphenyldisilane 1450-23-3
Citronellal (pract), 93% (gc) 106-23-0
Hydriodic Acid, 57 Wt.% Aq. Solution, Distilled, Unstabilized 7732-18-5
Cyclopentylamine, 99+% 1003-03-8
(Bromomethyl)triphenylphosphonium bromide, 98% 1034-49-7
Methyl trans-3-methoxyacrylate, 95% 5788-17-0
Benzyltriphenylphosphonium borohydride, 98% 18117-29-8
2-Methyl-6-phenylbenzothiazole, 97% 107559-02-4
Ethylenediaminetetraacetic acid ferric sodium salt, trihydrate, 98% 15708-41-5
2,4-Dichlorobenzyl Alcohol, 99% 1777-82-8
Diethyldithiocarbamic Acid Diethylammonium Salt, 98% (Titr.) 1518-58-7
Hydriodic acid, reagent ACS, 55% in water, without stabilizer 10034-85-2
2,2,6,6-Tetramethyl-4-Piperidone Hydrochloride, 97% 33973-59-0
Cellulose Acetate Hydrogen Phthalate, Acetyl Content 17.0-22.0% 9004-38-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net