Search   
MSDS 
:
 Diphenyl phthalate
CAS 
:
 84-62-8
SYNONYMS 
:
 1,2-Benzenedicarboxylic acid, diphenyl ester; Phenyl phthalate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 84-62-8 |Diphenyl phthalate | 98 | 201-546-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. Low hazard for usual
industrial handling. The toxicological properties of this substance
have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling. The toxicological properties of this substance
have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water. Get
medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. This material in sufficient quantity and reduced
particle size is capable of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Use with adequate ventilation. Avoid
breathing dust.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 84-62-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: odorless
pH: Not applicable.
Vapor Pressure: 7.53E-007 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 405 deg C
Freezing/Melting Point: 70 - 76 deg C
Autoignition Temperature: Not applicable.
Flash Point: 224 deg C ( 435.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 1.28
Molecular Formula: C20H14O4
Molecular Weight: 318.33

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 84-62-8: TI1935000
LD50/LC50:
CAS# 84-62-8: Oral, rat: LD50 = 8 gm/kg.
Carcinogenicity:
Diphenyl phthalate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: 0.080 mg/L; 96 hr; LC50 flow thru

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 84-62-8: No information available.
Canada
CAS# 84-62-8 is listed on Canada's NDSL List.
CAS# 84-62-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 84-62-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/11/1999 Revision #3 Date: 6/09/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Octakis-6-Bromo-6-Deoxy-??5-Cyclodextrin 53784-84-2
Octakis-6-Iodo-6-Deoxy-??5-Cyclodextrin 168296-33-1
4-Chromanol 96% 1481-93-2
Octakis-6-(Dimethyl-Tert-Butylsilyl)-6-Deoxy-??5-Cyclodextrin 0-01-1
Diphenyl phthalate 84-62-8
DL-4-Chlorophenylalanine Methyl Ester Hydrochloride, 99% 14173-40-1
1H-Benzotriazole, 98% 95-14-7
m-Cresol, 95% 108-39-4
Thiodiglycolic Acid,98% 123-93-3
n-Acetyl-s-(2-hydroxyethyl)-l-cysteine 15060-26-1
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR) 98258-72-1
Barium oxide 1304-28-5
Zinc Sulfide, Pieces, 3-12 mm, 99.9% 1314-98-3
Bromobenzene-d5, 99.5 atom% D 4165-57-5
Toluene-d8, 99.5+ atom % D 2037-26-5
1-Butanol-d10, packaged in ampules, 99+ atom % D 71-36-3
Ethylbenzene-d10, packaged in ampules, 99+ atom% D 25837-05-2
Mesitylene-d12, packaged in ampule, 98 atom% D 69441-16-3
Methylcyclohexane-d14, packaged in ampules, 99 atom % D 108-87-2
Methyl-d3 methacrylate-d5, stabilized 80-62-6
Aniline-d7, 99 atom% D 4165-61-1
Benzyl chloroformate, 50 wt% solution in toluene 108-88-3
Nitrobenzene-D5, 99.5 Atom% D 4165-60-0
1,1,2,2-Tetrachloroethane-d2, 99.5+ atom% D 33685-54-0
4,4'-Ethylenedianiline, 95% 621-95-4
Bromoform-d, stabilized with copper, 99 atom% D 75-25-2
1,2-Bis(dichlorophosphino)ethane, 97% 28240-69-9
N-Benzyl-4-cyano-4-(1-piperidino)-piperidine 84254-97-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetrasodium Salt, 85+% (UV-VIS) 59572-10-0
Dittmer reagent, 95%
Isoquinoline, 97% 119-65-3
Alkylbenzene sulfonic acid, mixture of C10-C13 isomers
Methyltriallylsilane 1112-91-0
Tetraallylsilane 1112-66-9
2-Ethoxy-2-(2'-phenylsulfonylethyl)-1,3-dioxolane 149099-23-0
Sodium Hydride, Dispersion in Mineral Oil, 75% 7646-69-7
Hexaphenyldisilane 1450-23-3
Citronellal (pract), 93% (gc) 106-23-0
Hydriodic Acid, 57 Wt.% Aq. Solution, Distilled, Unstabilized 7732-18-5
Cyclopentylamine, 99+% 1003-03-8
(Bromomethyl)triphenylphosphonium bromide, 98% 1034-49-7
Methyl trans-3-methoxyacrylate, 95% 5788-17-0
Benzyltriphenylphosphonium borohydride, 98% 18117-29-8
2-Methyl-6-phenylbenzothiazole, 97% 107559-02-4
Ethylenediaminetetraacetic acid ferric sodium salt, trihydrate, 98% 15708-41-5
2,4-Dichlorobenzyl Alcohol, 99% 1777-82-8
Diethyldithiocarbamic Acid Diethylammonium Salt, 98% (Titr.) 1518-58-7
Hydriodic acid, reagent ACS, 55% in water, without stabilizer 10034-85-2
2,2,6,6-Tetramethyl-4-Piperidone Hydrochloride, 97% 33973-59-0
Cellulose Acetate Hydrogen Phthalate, Acetyl Content 17.0-22.0% 9004-38-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net