Search   
MSDS 
:
 Dittmer reagent, 95%
CAS 
:
 
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes severe burns.

Potential Health Effects
Eye:
Causes severe eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
No CAS#s in product.
LD50/LC50:
Carcinogenicity:

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3264
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3264
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3264
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 35 Causes severe burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 30 Never add water to this product.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
US FEDERAL
TSCA

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/25/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Octakis-6-Bromo-6-Deoxy-??5-Cyclodextrin 53784-84-2
Octakis-6-Iodo-6-Deoxy-??5-Cyclodextrin 168296-33-1
4-Chromanol 96% 1481-93-2
Octakis-6-(Dimethyl-Tert-Butylsilyl)-6-Deoxy-??5-Cyclodextrin 0-01-1
Diphenyl phthalate 84-62-8
DL-4-Chlorophenylalanine Methyl Ester Hydrochloride, 99% 14173-40-1
1H-Benzotriazole, 98% 95-14-7
m-Cresol, 95% 108-39-4
Thiodiglycolic Acid,98% 123-93-3
n-Acetyl-s-(2-hydroxyethyl)-l-cysteine 15060-26-1
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR) 98258-72-1
Barium oxide 1304-28-5
Zinc Sulfide, Pieces, 3-12 mm, 99.9% 1314-98-3
Bromobenzene-d5, 99.5 atom% D 4165-57-5
Toluene-d8, 99.5+ atom % D 2037-26-5
1-Butanol-d10, packaged in ampules, 99+ atom % D 71-36-3
Ethylbenzene-d10, packaged in ampules, 99+ atom% D 25837-05-2
Mesitylene-d12, packaged in ampule, 98 atom% D 69441-16-3
Methylcyclohexane-d14, packaged in ampules, 99 atom % D 108-87-2
Methyl-d3 methacrylate-d5, stabilized 80-62-6
Aniline-d7, 99 atom% D 4165-61-1
Benzyl chloroformate, 50 wt% solution in toluene 108-88-3
Nitrobenzene-D5, 99.5 Atom% D 4165-60-0
1,1,2,2-Tetrachloroethane-d2, 99.5+ atom% D 33685-54-0
4,4'-Ethylenedianiline, 95% 621-95-4
Bromoform-d, stabilized with copper, 99 atom% D 75-25-2
1,2-Bis(dichlorophosphino)ethane, 97% 28240-69-9
N-Benzyl-4-cyano-4-(1-piperidino)-piperidine 84254-97-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetrasodium Salt, 85+% (UV-VIS) 59572-10-0
Dittmer reagent, 95%
Isoquinoline, 97% 119-65-3
Alkylbenzene sulfonic acid, mixture of C10-C13 isomers
Methyltriallylsilane 1112-91-0
Tetraallylsilane 1112-66-9
2-Ethoxy-2-(2'-phenylsulfonylethyl)-1,3-dioxolane 149099-23-0
Sodium Hydride, Dispersion in Mineral Oil, 75% 7646-69-7
Hexaphenyldisilane 1450-23-3
Citronellal (pract), 93% (gc) 106-23-0
Hydriodic Acid, 57 Wt.% Aq. Solution, Distilled, Unstabilized 7732-18-5
Cyclopentylamine, 99+% 1003-03-8
(Bromomethyl)triphenylphosphonium bromide, 98% 1034-49-7
Methyl trans-3-methoxyacrylate, 95% 5788-17-0
Benzyltriphenylphosphonium borohydride, 98% 18117-29-8
2-Methyl-6-phenylbenzothiazole, 97% 107559-02-4
Ethylenediaminetetraacetic acid ferric sodium salt, trihydrate, 98% 15708-41-5
2,4-Dichlorobenzyl Alcohol, 99% 1777-82-8
Diethyldithiocarbamic Acid Diethylammonium Salt, 98% (Titr.) 1518-58-7
Hydriodic acid, reagent ACS, 55% in water, without stabilizer 10034-85-2
2,2,6,6-Tetramethyl-4-Piperidone Hydrochloride, 97% 33973-59-0
Cellulose Acetate Hydrogen Phthalate, Acetyl Content 17.0-22.0% 9004-38-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net