**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 28240-69-9 |1,2-Bis(dichlorophosphino)ethane | 97 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 28240-69-9:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 70 deg C @ 1 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.5300 g/ml
Molecular Formula: Cl2PCH2CH2PCl2
Molecular Weight: 231.81
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Not available.
Conditions to Avoid:
Moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, phosphine, carbon monoxide, oxides of phosphorus,
carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 28240-69-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,2-Bis(dichlorophosphino)ethane -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 28240-69-9: No information available.
Canada
CAS# 28240-69-9 is listed on Canada's NDSL List.
CAS# 28240-69-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 28240-69-9 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 1/13/1998 Revision #3 Date: 9/08/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Octakis-6-Bromo-6-Deoxy-??5-Cyclodextrin
| 53784-84-2 |
|
Octakis-6-Iodo-6-Deoxy-??5-Cyclodextrin
| 168296-33-1 |
|
4-Chromanol 96%
| 1481-93-2 |
|
Octakis-6-(Dimethyl-Tert-Butylsilyl)-6-Deoxy-??5-Cyclodextrin
| 0-01-1 |
|
Diphenyl phthalate
| 84-62-8 |
|
DL-4-Chlorophenylalanine Methyl Ester Hydrochloride, 99%
| 14173-40-1 |
|
1H-Benzotriazole, 98%
| 95-14-7 |
|
m-Cresol, 95%
| 108-39-4 |
|
Thiodiglycolic Acid,98%
| 123-93-3 |
|
n-Acetyl-s-(2-hydroxyethyl)-l-cysteine
| 15060-26-1 |
|
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR)
| 98258-72-1 |
|
Barium oxide
| 1304-28-5 |
|
Zinc Sulfide, Pieces, 3-12 mm, 99.9%
| 1314-98-3 |
|
Bromobenzene-d5, 99.5 atom% D
| 4165-57-5 |
|
Toluene-d8, 99.5+ atom % D
| 2037-26-5 |
|
1-Butanol-d10, packaged in ampules, 99+ atom % D
| 71-36-3 |
|
Ethylbenzene-d10, packaged in ampules, 99+ atom% D
| 25837-05-2 |
|
Mesitylene-d12, packaged in ampule, 98 atom% D
| 69441-16-3 |
|
Methylcyclohexane-d14, packaged in ampules, 99 atom % D
| 108-87-2 |
|
Methyl-d3 methacrylate-d5, stabilized
| 80-62-6 |
|
Aniline-d7, 99 atom% D
| 4165-61-1 |
|
Benzyl chloroformate, 50 wt% solution in toluene
| 108-88-3 |
|
Nitrobenzene-D5, 99.5 Atom% D
| 4165-60-0 |
|
1,1,2,2-Tetrachloroethane-d2, 99.5+ atom% D
| 33685-54-0 |
|
4,4'-Ethylenedianiline, 95%
| 621-95-4 |
|
Bromoform-d, stabilized with copper, 99 atom% D
| 75-25-2 |
|
1,2-Bis(dichlorophosphino)ethane, 97%
| 28240-69-9 |
|
N-Benzyl-4-cyano-4-(1-piperidino)-piperidine
| 84254-97-7 |
|
1,3,6,8-Pyrenetetrasulfonic Acid Tetrasodium Salt, 85+% (UV-VIS)
| 59572-10-0 |
|
Dittmer reagent, 95%
| |
|
Isoquinoline, 97%
| 119-65-3 |
|
Alkylbenzene sulfonic acid, mixture of C10-C13 isomers
| |
|
Methyltriallylsilane
| 1112-91-0 |
|
Tetraallylsilane
| 1112-66-9 |
|
2-Ethoxy-2-(2'-phenylsulfonylethyl)-1,3-dioxolane
| 149099-23-0 |
|
Sodium Hydride, Dispersion in Mineral Oil, 75%
| 7646-69-7 |
|
Hexaphenyldisilane
| 1450-23-3 |
|
Citronellal (pract), 93% (gc)
| 106-23-0 |
|
Hydriodic Acid, 57 Wt.% Aq. Solution, Distilled, Unstabilized
| 7732-18-5 |
|
Cyclopentylamine, 99+%
| 1003-03-8 |
|
(Bromomethyl)triphenylphosphonium bromide, 98%
| 1034-49-7 |
|
Methyl trans-3-methoxyacrylate, 95%
| 5788-17-0 |
|
Benzyltriphenylphosphonium borohydride, 98%
| 18117-29-8 |
|
2-Methyl-6-phenylbenzothiazole, 97%
| 107559-02-4 |
|
Ethylenediaminetetraacetic acid ferric sodium salt, trihydrate, 98%
| 15708-41-5 |
|
2,4-Dichlorobenzyl Alcohol, 99%
| 1777-82-8 |
|
Diethyldithiocarbamic Acid Diethylammonium Salt, 98% (Titr.)
| 1518-58-7 |
|
Hydriodic acid, reagent ACS, 55% in water, without stabilizer
| 10034-85-2 |
|
2,2,6,6-Tetramethyl-4-Piperidone Hydrochloride, 97%
| 33973-59-0 |
|
Cellulose Acetate Hydrogen Phthalate, Acetyl Content 17.0-22.0%
| 9004-38-0 |
|
|