Search   
MSDS 
:
 Isoquinoline, 97%
CAS 
:
 119-65-3
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 119-65-3 |Isoquinoline | 97% | 204-341-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 21/22 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Irritating to eyes
and skin.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use only
in a well-ventilated area. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Wash clothing before reuse.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 119-65-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid above room te
Color: Not available.
Odor: None reported
pH: Not available.
Vapor Pressure: 0.05 hPa @ 20 C
Viscosity: Not available.
Boiling Point: 242 deg C
Freezing/Melting Point: 25.00 - 27.00 deg C
Autoignition Temperature: Not available.
Flash Point: 225 deg F ( 107.22 deg C)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Partially soluble.
Specific Gravity/Density: 1.1000g/cm3
Molecular Formula: C9H7N
Molecular Weight: 129.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of nitrogen, carbon dioxide,
nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 119-65-3: NW6825000
LD50/LC50:
CAS# 119-65-3: Draize test, rabbit, skin: 20 mg/24H Moderate; Oral,
rat: LD50 = 360 mg/kg; Skin, rabbit: LD50 = 590 uL/kg.
Carcinogenicity:
Isoquinoline -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 119-65-3: No information available.
Canada
CAS# 119-65-3 is listed on Canada's DSL List.
CAS# 119-65-3 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 119-65-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/14/1998 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Octakis-6-Bromo-6-Deoxy-??5-Cyclodextrin 53784-84-2
Octakis-6-Iodo-6-Deoxy-??5-Cyclodextrin 168296-33-1
4-Chromanol 96% 1481-93-2
Octakis-6-(Dimethyl-Tert-Butylsilyl)-6-Deoxy-??5-Cyclodextrin 0-01-1
Diphenyl phthalate 84-62-8
DL-4-Chlorophenylalanine Methyl Ester Hydrochloride, 99% 14173-40-1
1H-Benzotriazole, 98% 95-14-7
m-Cresol, 95% 108-39-4
Thiodiglycolic Acid,98% 123-93-3
n-Acetyl-s-(2-hydroxyethyl)-l-cysteine 15060-26-1
Methyl 4-(3-Oxo-3-Phenyl-1-Propenyl) Benzoate, 98+% (NMR) 98258-72-1
Barium oxide 1304-28-5
Zinc Sulfide, Pieces, 3-12 mm, 99.9% 1314-98-3
Bromobenzene-d5, 99.5 atom% D 4165-57-5
Toluene-d8, 99.5+ atom % D 2037-26-5
1-Butanol-d10, packaged in ampules, 99+ atom % D 71-36-3
Ethylbenzene-d10, packaged in ampules, 99+ atom% D 25837-05-2
Mesitylene-d12, packaged in ampule, 98 atom% D 69441-16-3
Methylcyclohexane-d14, packaged in ampules, 99 atom % D 108-87-2
Methyl-d3 methacrylate-d5, stabilized 80-62-6
Aniline-d7, 99 atom% D 4165-61-1
Benzyl chloroformate, 50 wt% solution in toluene 108-88-3
Nitrobenzene-D5, 99.5 Atom% D 4165-60-0
1,1,2,2-Tetrachloroethane-d2, 99.5+ atom% D 33685-54-0
4,4'-Ethylenedianiline, 95% 621-95-4
Bromoform-d, stabilized with copper, 99 atom% D 75-25-2
1,2-Bis(dichlorophosphino)ethane, 97% 28240-69-9
N-Benzyl-4-cyano-4-(1-piperidino)-piperidine 84254-97-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetrasodium Salt, 85+% (UV-VIS) 59572-10-0
Dittmer reagent, 95%
Isoquinoline, 97% 119-65-3
Alkylbenzene sulfonic acid, mixture of C10-C13 isomers
Methyltriallylsilane 1112-91-0
Tetraallylsilane 1112-66-9
2-Ethoxy-2-(2'-phenylsulfonylethyl)-1,3-dioxolane 149099-23-0
Sodium Hydride, Dispersion in Mineral Oil, 75% 7646-69-7
Hexaphenyldisilane 1450-23-3
Citronellal (pract), 93% (gc) 106-23-0
Hydriodic Acid, 57 Wt.% Aq. Solution, Distilled, Unstabilized 7732-18-5
Cyclopentylamine, 99+% 1003-03-8
(Bromomethyl)triphenylphosphonium bromide, 98% 1034-49-7
Methyl trans-3-methoxyacrylate, 95% 5788-17-0
Benzyltriphenylphosphonium borohydride, 98% 18117-29-8
2-Methyl-6-phenylbenzothiazole, 97% 107559-02-4
Ethylenediaminetetraacetic acid ferric sodium salt, trihydrate, 98% 15708-41-5
2,4-Dichlorobenzyl Alcohol, 99% 1777-82-8
Diethyldithiocarbamic Acid Diethylammonium Salt, 98% (Titr.) 1518-58-7
Hydriodic acid, reagent ACS, 55% in water, without stabilizer 10034-85-2
2,2,6,6-Tetramethyl-4-Piperidone Hydrochloride, 97% 33973-59-0
Cellulose Acetate Hydrogen Phthalate, Acetyl Content 17.0-22.0% 9004-38-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net