庐
ITW CHEMTRONICS MSDS #1629
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Company Address:
8125 Cobb Center Drive
Kennesaw, GA 30152
Product Information: 800-TECH-401 Emergency: (Chemtrec) 800-424-9300
Customer Service: 800-645-5244 Revision Date: April 4, 2008
Product Identification
New & Improved Kontact Restorer庐
Product Code: ES1629
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS# Wt. % Range
n-propyl bromide 106-94-5 65.0-75.0
1,1,1,2-Tetrafluoroethane 811-97-2 5.0-25.0
Carbon Dioxide 124-38-9 1.0-5.0
Mineral Oil 8042-47-5 1.0-5.0
1,2 Epoxybutane 106-88-7 0.1-1.0
t-Butanol 75-65-0 0.1-1.0
SECTION 3: HAZARD IDENTIFICATION
Emergency Overview: Clear, colorless liquid with faint ethereal odor. This product is nonflammable. Liquid may irritate eyes and skin under repeated or prolonged
exposure. Breathing high concentrations of product vapor may produce dizziness and nausea.
Potential Health Effects:
Eyes: Liquid, aerosols and vapors of this product may be irritating and can cause pain, tearing, reddening and swelling accompanied by a stinging sensation.
Skin: Prolonged contact can cause skin irritation, including redness, burning, drying and/or cracking of skin..
Ingestion: May be harmful if swallowed. Swallowing this material may result in nausea, vomiting and weakness followed by central nervous system depression.
Inhalation: Can be harmful if inhaled. High concentrations of vapors in immediate area can cause dizziness, nausea, vomiting, unconsciousness and death.
SECTION 4: FIRST AID MEASURES
Eyes: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Have eyes examined
and tested by medical personnel if irritation develops or persists.
Skin: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persist. Wash clothing before reuse.
Ingestion: If swallowed, do not induce vomiting. If conscious, give 2 glasses of water. Never give anything by mouth to an unconscious person. Keep head below knees
to minimize chance of aspirating material into the lungs. Get medical attention immediately.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
Flash Point: None to boiling (TCC) Flammable/Explosion limits: LEL 4.0 / UEL 8.0 (% volume in air)
Extinguishing Media: Use water spray or fog, CO2, dry chemical or water stream when fighting fires involving this material.
Fire Fighting Instructions: As in any fire, wear self-contained breathing apparatus (pressure-demand, MSHA/NIOSH approved or equivalent) and full protective gear.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Spills: Shut off leak if possible and safe to do so. Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container for proper disposal.
Do not flush to sewer. Avoid runoff into storm sewers and ditches which lead to waterways.
SECTION 7: HANDLING AND STORAGE
Avoid prolonged or repeated contact with eyes, skin, and clothing. Wash hands before eating. Use with adequate ventilation. Avoid breathing product vapor or mist.
Do not reuse this container. Store in a cool dry place away from heat, sparks and flame. Keep container closed when not in use. Do not store in direct sunlight.
KEEP OUT OF REACH OF CHILDREN.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines:
CHEMICAL NAME ACGIH TLV OSHA PEL OTHER
n-propyl bromide 10 ppm NE
1,2 Epoxybutane NE NE
t-Butanol 100 ppm 100 ppm 150 ppm STEL NIOSH
1,1,1,2-Tetrafluoroethane NE NE 1000 ppm (Dupont)
NE = Not Established
Work/Hygienic Practices: Good general ventilation should be sufficient to control airborne levels. If vapor concentration exceeds TLV, use NIOSH approved organic
vapor cartridge respirator. Wear safety glasses with side shields (or goggles) and rubber or other chemically resistant gloves.
NFPA and HMIS Codes: NFPA HMIS
Health 2 2
Flammability 1 1
Reactivity 1 1
Personal Protection - B
Page 1 of 2
庐
ITW CHEMTRONICS MSDS #1629
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Clear, colorless liquid Solubility in Water: Negligible
Odor: Characteristic Odor Specific Gravity: 1.35
pH: NA (Water =1)
Vapor Pressure: 112 mmHg@ 70F Evaporation Rate: >1 (Butyl acetate=1)
Boiling Point: 156掳F (69C) Percent Volatile: >95%
SECTION 10: STABILITY AND REACTIVITY
Stability - This product is stable under normal conditions.
Conditions to Avoid: Steam, oxidizers, elevated temperatures. Do not spray near open flames, red hot surfaces or other sources of ignition.
Incompatibility: Do not mix with strong oxidizers and strong bases.
Products of Decomposition: Thermal decomposition may release hydrogen bromide, carbon monoxide and carbon dioxide.
Hazardous Polymerization: Will not occur
Conditions to Avoid: Keep away from ignition source.
SECTION 11: TOXICOLOGICAL INFORMATION
Inhalation:
n-propyl bromide LC50 rats 253 000 mg/m3/0.5hr* Reproductive effects: n-propyl bromide NOEL rats 100 ppm
Tetrafluoroethane Rats ALC 567,000ppm/4hrs (Rozman and Doull, 2002) LOEL rats 250 ppm
Carbon Dioxide LCLo/Human 9pph/5min
Ingestion:
n-propyl bromide LD50/rats 4260 mg/kg*
*Information provided by manufacturer.
Cancer Information: No ingredients in this product are listed as human carcinogens by IARC or NTP.
Reproductive effects: n-propyl bromide Teratogenic effects: none Mutagenic effects: none
SECTION 12: ECOLOGICAL INFORMATION
Avoid runoff into storm sewers and ditches which lead to waterways. Water runoff can cause environmental damage.
REPORTING
US regulations require reporting spills of this material that could reach any surface waters.
The toll free number for the US Coast Guard National Response Center is: 1-800-424-8802
SECTION 13: DISPOSAL CONSIDERATIONS
Dispose of in accordance with all federal, state and local regulations. Water runoff can cause environmental damage.
SECTION 14: TRANSPORTATION INFORMATION
Proper Sub. Pkg. Hazard Pkg. Max.
Shipping Name UN Number Class Risk Group Label Instr. Quantity
Air: Aerosols non-flammable UN 1950 2.2 NA NA. Non-flammable 203 75 k.g; 150k.g.
Ground: Consumer Commodity NA ORM-D NA NA ORM-D Pkg. 173.306
ORM-D Auth.
SECTION 15: REGULATORY INFORMATION
SECTION 313 SUPPLIER NOTIFICATION
This product contains the following chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-To-Know Act of
1986 (40 CFR 372).
Chemical Name CAS No. Wt. % Range
1,2 Epoxybutane 106-88-7 0.1-1.0
This information should be included on all MSDSs copied and distributed for this material.
TOXIC SUBSTANCES CONTROL ACT (TSCA).
All ingredients of this product are listed on the TSCA Inventory.
CALIFORNIA PROPOSITION 65: This product contains n-propyl bromide, a chemical known to the state of California to cause birth defects or other reproductive
harm.
WHMIS: Class A; Class D2A; Class D2B
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all of the information required by the CPR.
SECTION 16: OTHER INFORMATION
This product is a Level 1 aerosol. Do not puncture or incinerate containers. Normal ventilation for standard manufacturing practices is usually adequate. Local
exhaust should be used when large amounts are released.
To the best of our knowledge, the information contained herein is accurate. However, all materials may present unknown hazards and should be used with caution. In
particular, improper use of our products and their inappropriate combination with other products and substances may produce harmful results which cannot be
anticipated. Final determination of the suitability of any material is the sole responsibility of the user. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that may exist.
Page 2 of 2
|