Huntsman Advanced Materials Americas Inc.
P.O. Box 4980
The Woodlands, TX 77387-4980
DISTRIBUTED BY FREEMAN MFG & SUPPLY CO.
800-321-8511 www.freemansupply.com
24-Hour Emergency Phone: (800) 328-8501 1
MSDS No: 6336
Effective Date: 8/26/05 Material Safety Data Sheet
Health: 3
1. PRODUCT IDENTIFICATION 1
Flammability: 1
3 0
Reactivity: 0
Trade Name: XMH 8579 Resin
Personal Protection:
Chemical Family: Epoxy
HMIS RATING
NFPA RATING
Synonyms:
LSA 642-03 Resin
Intended Use or Product Type: Filled epoxy resin
2. COMPOSITION / INFORMATION ON INGREDIENTS
O CAS No. CHEMICAL IDENTITY EXPOSURE LIMITS CARCINOGEN
S STATUS
H ACGIH OSHA MFR. IARC NTP OSHA
A TWA STEL PEL STEL
* 2425-79-8 Oxirane, 2,2'-[1,4- NE NE NE NE NE NR NR NR
Butanediylbis(Oxymethylene)]bis-
Common Butanediol diglycidyl ether
Name:
* 25068-38-6 Phenol, 4,4'-(1- NE NE NE NE NE NR NR NR
methylethylidene)bis-, polymer
with (chloromethyl)oxirane
Common Bisphenol A diglycidyl ether
Name: polymer
* 50327-99-6 Triglycidyl Isocyanurate Polymer NE NE NE NE NE NR NR NR
with Decandioic Acid and 2,2-
Dimethyl-1,3-Propanediol
Common Reactive modifier
Name:
* = OSHA Hazardous Ingredient
3. HAZARDS IDENTIFICATION
Emergency Overview: Causes severe skin irritation. Causes eye irritation. May cause skin burns and allergic skin reaction.
Primary Route(s) of Entry: Dermal; heated product may produce inhalable vapors.
Printed: 5/3/2006 Page 1 of 5
XMH 8579 Resin Huntsman Advanced Materials
Effective Date: 8/26/05 Americas Inc. (EL)
4. FIRST AID MEASURES
Ingestion: If conscious, give 2 - 4 glasses of water to drink. Do not induce vomiting. Call a physician.
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Destroy contaminated
shoes.
Inhalation: Remove to fresh air. Call a physician.
Eyes: Immediately flush eyes with water for at least 15 minutes. Call a physician.
Overexposure Effects: Causes severe skin irritation. Causes eye irritation. May cause skin burns and allergic skin reaction.
Medical Conditions Aggravated by Exposure: Skin and eye conditions.
Additional Information: Referral to a physician is recommended if there is any question about the seriousness of any injury.
5. FIRE FIGHTING MEASURES
> 200掳F (> 93 掳C)
Flash Point:
Estimated
Flash Point Method Used:
Not established
Flammable Limits in Air (Lower - % by volume):
Not established
Flammable Limits in Air (Upper - % by volume):
Fire Fighting Extinguishing Media: Carbon dioxide, dry chemical, foam, water.
Fire Fighting Equipment: Use self-contained breathing apparatus.
Fire and Explosion Hazards: Decomposition and combustion products may be toxic.
6. ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Remove spillage by absorbing in absorbent material.
7. HANDLING AND STORAGE
Signal Word: Danger!
Precautions: Causes severe skin irritation and may cause skin burns. Can cause eye irritation and allergic skin reaction. Do not
get on skin or on clothing. Avoid contact with eyes. Wash thoroughly after handling.
Other Handling Information: Nuisance dust may be generated when sanding or sawing cured material.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Skin Protection: Wear impermeable gloves.
Respiratory Protection: Use NIOSH approved organic vapor cartridge respirator when vapor/mist exposure is likely.
Printed: 5/3/2006 Page 2 of 5
XMH 8579 Resin Huntsman Advanced Materials
Effective Date: 8/26/05 Americas Inc. (EL)
Eye Protection: Wear splash-proof chemical goggles.
Engineering Controls: General mechanical and local exhaust in accordance with ACGIH recommendations.
9. PHYSICAL AND CHEMICAL PROPERTIES
Beige
Color:
Thixotropic Paste
Physical State:
Negligible
Solubility in Water:
Not Determined
Vapor Pressure:
1.65 (water = 1)
Specific Gravity:
Not Determined
Boiling Point:
Not Determined
Evaporation Rate:
Not Determined
Vapor Density:
Not Determined
pH:
Percent Volatile: Negligible.
10. STABILITY AND REACTIVITY
Conditions to Avoid: Excessive heat for prolonged periods of time.
Stability: Stable.
Incompatibility: Strong oxidizers, acids and bases.
Hazardous Decomposition Products: Combustion may form toxic materials, such as carbon dioxide, carbon monoxide.
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Sensitization: Possible in susceptible individuals.
Skin Irritation: Severe skin irritant.
Eye Irritation: Irritant.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method: Consult qualified local or corporate personnel for method that will comply with local, state and federal
health and environmental regulations.
14. TRANSPORT INFORMATION
Printed: 5/3/2006 Page 3 of 5
XMH 8579 Resin Huntsman Advanced Materials
Effective Date: 8/26/05 Americas Inc. (EL)
DOT: Non-Bulk
Resin compounds, N.O.I.
Proper Shipping Name:
Department of Transportation: Not regulated as a hazardous material by the U.S. Dept. of Transportation (DOT) 49 CFR
172.101 hazardous materials table.
15. REGULATORY INFORMATION
US Federal Regulations:
Occupational Safety and Health Act (OSHA): This product is considered to be a hazardous chemical under the OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Resource Conservation and Recovery Act (RCRA): Not a hazardous waste under RCRA (40 CFR 261).
SARA Title III: Section 313 Toxic Chemical List (TCL): This product does not contain any chemicals for routine annual toxic
chemical release reporting under Section 313 (40 CFR 372).
TSCA Section 8(b) - Inventory Status: All chemical components of this product are in compliance with TSCA inventory
requirements.
TSCA Section 12(b) - Export Notification: This product does not contain any chemical(s) that are subject to a Section 12(b)
export notification.
State Regulations:
California Proposition 65: The following is required composition information. This product contains the following chemical(s)
which are currently listed on the California list of Known Carcinogens and Reproductive Toxins:
Chemical Name: Quartz (SiO2)
Common Name: Crystalline silica
CAS Number: 14808-60-7
Percent in Composition: 0.0542 % by wt
Comment: Warning! This chemical is known to the State of California to cause cancer.
Pennsylvania Right-to-Know: The following is required composition information:
Chemical Name: Sulfuric acid, barium salt (1:1)
Common Name: Barium Sulfate
CAS Number: 7727-43-7
Comment: Hazardous Substance
Chemical Name: Phenol, 4,4'-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane
Common Name: Bisphenol A diglycidyl ether polymer
CAS Number: 25068-38-6
Comment: Not on Pennsylvania Hazardous Substance List
Chemical Name: 1- Propene, Homopolymer
Common Name: Polypropylene powder
CAS Number: 9003-07-0
Comment: Not on Pennsylvania Hazardous Substance List
Printed: 5/3/2006 Page 4 of 5
XMH 8579 Resin Huntsman Advanced Materials
Effective Date: 8/26/05 Americas Inc. (EL)
Chemical Name: Bentonite
CAS Number: 1302-78-9
Comment: Not on Pennsylvania Hazardous Substance List
Chemical Name: Triglycidyl Isocyanurate Polymer with Decandioic Acid and 2,2-Dimethyl-1,3-Propanediol
Common Name: Reactive modifier
CAS Number: 50327-99-6
Comment: Not on Pennsylvania Hazardous Substance List
Chemical Name: Silica
Common Name: Fumed Silica
CAS Number: 7631-86-9
Comment: Hazardous Substance
16. OTHER INFORMATION
6336
MSDS No:
Dianne Blessing
Approved By:
EH&S Specialist
Title:
Disclaimer: The information and recommendations contained herein are based upon tests in controlled laboratory conditions, are
believed to be correct, and are provided for the sole purpose of hazard communication as part of Huntsman鈥檚 product safety
program. This product has not been tested for, and therefore is not recommended or suitable for, uses for which prolonged contact
with mucous membranes, abraded skin, or blood is intended or likely, or for uses for which implantation within the human body is
intended, and Huntsman assumes no liability for any such uses.
The information and recommendations contained herein are not intended to constitute performance information concerning the
product, which is available in separate technical data sheets available from Huntsman upon request. Users are urged, and are urged
to urge others who may come in contact with the product, to obtain and consult data sheets prior to purchase, use, transportation or
storage of the product.
HUNTSMAN MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY, QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. HUNTSMAN鈥橲 LIABILITY IS
STRICTLY LIMITED TO REIMBURSEMENT OF BUYER鈥橲 PURCHASE PRICE, OR IN HUNTSMAN鈥橲 DISCRETION
REPLACEMENT, OF THE PRODUCT IN RESPECT OF WHICH SUCH CLAIM IS MADE. HUNTSMAN鈥橲 LIABILITY IS
STRICTLY LIMITED BY LEGAL NOTICES IN TECHNICAL DATA SHEETS, PRODUCT LITERATURE AND/OR SALE
DOCUMENTS. The foregoing DISCLAIMERS and LIMITATION OF LIABILITY supercede inconsistent or contradictory
provisions in Buyer鈥檚 documents.
USER SHOULD CONSULT A LEGAL ADVISOR OR THE APPROPRIATE GOVERNMENTAL AGENCY TO DETERMINE
THE APPLICABILITY OR EFFECT OF ANY LAW OR REGULATION WITH RESPECT TO THE PRODUCT. HUNTSMAN
DOES NOT UNDERTAKE TO FURNISH ADVICE ON SUCH MATTERS.
Printed: 5/3/2006 Page 5 of 5
|