PRODUCT DATA









Quick Cure

Polyurethane Foam Sealant

                       Touch ‘n Seal Quick Cure polyurethane foam

                       sealant is the easiest means to seal cracks

                       and gaps around plumbing, ventilation outlets,

                       electrical junctions,* between sole plates and

                       concrete slabs, or anywhere you need a fast,

                       economical air-sealing moisture barrier. The

                       All-Direction Dispensing straw system is ideal

                       for maneuvering tight spots. And the special

                       adapter allows for the can to be partially used,

                       stored and re-started later. Quick-Cure is an

                       excellent filler with exceptional expansion and

                       cure time.

                       � High Yield - 12 oz can yields up to

                         918 linear ft. (1/4" diameter bead) ASTM C-1536

                       �    Straw & adapter included -

                            no gun needed

                       �    Seals & insulates

                       �    Class 1 foam

                       �    No CFC’s, No HCFC’s









                        * Seal around (never inside) junction boxes.

                                                                      DIRECTIONS

                                                                      Read all directions and cautions before use.

                                                                      For additional information, see package label or MSDS.

                          Quick Cure                                  �       PRODUCT IS FLAMMABLE DURING

                          Polyurethane Foam Sealant

                                                                              DISPENSING: Turn off sources of ignition

                                                                              prior to use.

TECHNICAL DATA:                                                       �       SURFACE PREP: For best results, apply in

                                                                              temperatures between 60-100°F (16-38°C) into

�     Shelf life: 24 months

                                                                              spaces with 40% or greater relative humidity.

�     Tack-free time: less than 30 minutes (70°F, 40% RH)

                                                                              To improve curing in arid regions, spray a light

�     Cure time: 4 hours (70°F, 40% RH)

                                                                              water mist into the cavity before applying foam.

�     Thermal Resistance: (ASTM C-518) R-Value 4.9 per

                                                                              Surface should be free of oil and dirt to promote

      inch thickness                                                          adhesion. Attach straw to adapter, then connect

�     Density: 1.75 +/- .25 cubic ft.                                         adapter to valve and shake well (30 seconds).

�     Water Vapor Transmission: 10 perm inches

                                                                      �       APPLICATION: Testing on scrap material first,

�     Contains fire retardant

                                                                              hold can upright and activate trigger until foam

                                                                              begins to dispense. Once started, foam can be

                                                                              dispensed at any angle; however, upside-down

                                                                              dispensing is the most efficient means of delivery.

             YIELD ESTIMATE TABLE

                                                                              Fill gap 1/3 full, leaving room for expansion.

    Size(Volume)   Bead Diameter    Linear Feet

                                                                              Foam continues to dispense for a few seconds

    24 oz. can         1/4�            1805

                                        818

                       3/8�

                                                                              after trigger is released. Do not overfill.

                                        918

    12 oz. can         1/4�

                                        408

                       3/8�

                                                                      �       STORE UPRIGHT BELOW 90°F (32°C)

ASTM C-1536



                                                                      �       FOAM BONDS TO SKIN QUICKLY. Wear gloves,

                                                                              eye protection and work clothes; use drop cloths.

                                                                      �       FINISH: Foam is tack free in 30 minutes and dries

                                                                              in 4 hours. Excess can be trimmed, sanded,

                                                                              caulked or plastered as necessary. Direct sunlight

                                                                              discolors foam if not painted.





                                                                                                UNDERWRITERS LABORATORIES INC.

                                                                                           CLASSIFIED CAULKING AND SEALANTS                                     R14175

                                                                                                             Surface Burning Characteristics

                                                                                                                                                                 ILI5

                                                                                                     Applied To Inorganic Reinforced Cement Board*

                                                                                              Flame Spread 10              Smoke Developed 15

                                                                          *Tested as applied in two 3/4 in. diameter beads, 8 inches on center, covering 8.3% of the

                                                                          exposed test sample area.



                                                                       CAUTION: Contains Polymeric MDI, Polyurethane Resin & Propane / Isobutane. If burned, dried

                                                                       foam may release hazardous decomposition products. Keep away from heat, sparks, flames and

                                                                       static electricity. Turn off sources of ignition (pilot light, etc.). Ventilate work area with moving,

                                                                       fresh air. Vapors heavier than air may cause flash fire or ignite explosively. Do not puncture,

                                                                       expose to heat or store at temperatures above 120°F (49°C). Dried foam may be combustible if

                                                                       exposed to temperatures in excess of 240°F (116°C) Do not leave in auto. Wear protective

                                                                       gloves, safety glasses, work clothes.



                                                                       FIRST AID TREATMENT - SKIN CONTACT: DO NOT RINSE WITH WATER (water helps curing).

                                                                       If foam is wet: remove immediately with acetone or polyurethane foam cleaner. After removal,

                                                                       wash with soap and water. If foam has dried: it is very difficult to remove. Do not try to remove

                                                                       with solvents. Cured foam wears off and is not harmful to health. EYE CONTACT: Flush with

                                                                       water for 15 minutes and get immediate medical attention. INHALATION: Overexposure to

                                                                       vapors may cause dizziness or headache � move to fresh air. Consult physician if needed.

                                                                       INGESTION: Call a physician. KEEP OUT OF REACH OF CHILDREN.





                                                                                                                                                           Pallet Qty.

                                                  Case Pack

                                     Item #

            Product                                                                            Master Carton

                                                                Unit UPC Code                                                     Case Weight

    Quick Cure                     4004521212     12 / 12 oz.                                                                                                    108

                                                                                             1 00 75650 00057 8                         13.04

                                                                0 75650 00057 1

    Quick Cure                     4004521224     12 / 24 oz.                                                                                                     72

                                                                                             1 00 75650 00058 5                         23.36

                                                                0 75650 00058 8









                                                                                                                                                        MK-095 (03-06)