PRODUCT DATA









Gun Foam II

 Polyurethane Foam Sealant

                                                                                  Approved fireblock

                                                                              �

                                                                                  penetration sealant

                                                                                           Evaluation Report No. ICC-ES ESR-1926





                                                                              �   Type V residential fireblock

                                                                              �   ASTM E-814 and UL-1715 tested*

                                                                              �   Easy-to-identify orange color

                                                                              �   Seals gaps and cracks, stops air

                                                                                  infiltration permanently

                                                                              �   Creates moisture vapor barrier

                                                                              �   Outperforms fiberglass

                                                                              �   Yields up to 3200 linear feet

                                                                                  (1/4 inch dia. bead, ASTM C-1536)

                                                                              �   Fast cure, tack-free in about

                                                                                  10 minutes



*Touch ‘n Seal Gun Foam II polyurethane foam sealant has been tested in

accordance with ASTM-814 and found to be equivalent in performance (vs.

approved fireblock materials) as a Type V residential fireblock penetration

sealant. NOT A FIRESTOP.

                                                                                                  DIRECTIONS

                                                                                                  Read all directions and cautions before use.

                         Gun Foam II                                                              For additional information, see package label

                                                                                                  or MSDS.

                         Polyurethane Foam Sealant

                                                                                                  �      SURFACE PREP: Surface should be free of

TECHNICAL DATA                                                                                           dirt, oil, grease and excess moisture.

                                                                                                  �      SET-UP: Attach applicator gun to can (do not

    Density: (ASTM D-1622) 1.2-1.8 lbs./cu. ft.

                                                                                                         overtighten), then shake well for 30 seconds.

    Percent Closed Cell Content:

    (ASTM D-2856) 77%                                                                             �      APPLICATION: Dispense foam with can upside

                                                                                                         down, testing bead size on scrap material first.

    Thermal Resistance: (ASTM C-518)

                                                                                                         Fill area about 50% full, leaving room for foam to

    R-value 4.5 per inch thickness

                                                                                                         expand. Note: To improve curing in arid regions,

    Maximum Service Temperature of Cured

                                                                                                         spray a light water mist into the cavity before

    Foam: 240° F (116° C)

                                                                                                         applying foam.

    Compressive Strength:

                                                                                                  �      STORE UPRIGHT (50°-100°F)

    (ASTM D-1621) 11 psi

    Tensile Strength: (ASTM D-1623) 26 psi                                                        �      FOAM BONDS TO SKIN QUICKLY. Wear gloves,

                                                                                                         eye protection and work clothes; use drop cloths.

    Shear Strength: (ASTM C-273) 18 psi

    Shear Strain: (ASTM C-273) 38 psi                                                             �      FOR BEST RESULTS use in temperatures

                                                                                                         60° - 100° F (50% relative humidity).

    Percent Elongation at Break: 12%

    Shelf Life: 18 months                                                                         �      FINISH: Foam will be tack-free in about 10

                                                                                                         minutes (50% RH). Excess can be trimmed in

    Contains no CFC’s, no HCFC’s

                                                                                                         about 30 minutes. Cover or paint foam surfaces

                                                                                                         exposed to direct sunlight.

          YIELD ESTIMATE TABLE

  Size(Volume)   Bead Diameter            Linear Feet

                                                                                                  �      CAN CHANGEOVER: Once started, do not

  24 oz. can                                 3200

                       1/4�

                                                                                                         remove gun until can is empty; then purge gun

                                             1420

                       3/8�

                                                                                                         and remove can. Clean gun thoroughly with

ASTM C-1536

                                                                                                         acetone or polyurethane foam cleaner. Do not

                                                                                                         allow foam to harden in gun.

                                                                                                  CAUTION: Contains Polymeric MDI, Polyurethane Resin & Propane / Isobutane. Cured foam

also available                                                                                    exposed to temperatures in excess of 240°F (116°C) may release hazardous decomposition

                                                                                                  products. Keep away from heat, sparks, flames and static electricity. Turn off sources of ignition

                  Poly-Clean                                                                      (pilot light, etc.). Ventilate work area with moving, fresh air. Vapors heavier than air may cause

                                                                                                  flash fire or ignite explosively. Do not puncture, expose to heat or store at temperatures above

                  Polyurethane Foam Cleaner                                                       120°F (49°C). Do not leave in auto. Wear protective gloves, safety glasses, work clothes.

                  � Removes wet foam from hands, tools and

                                                                                                  FIRST AID TREATMENT - SKIN CONTACT: DO NOT RINSE WITH WATER (water helps curing).

                    foam applicator guns                                                          If foam is wet: remove immediately with acetone or polyurethane foam cleaner. After removal,

                  � Trilingual label (English, Spanish, French)                                   wash with soap and water. If foam has dried: it is very difficult to remove. Do not try to remove

                                                                                                  with solvents. Cured foam wears off and is not harmful to health. EYE CONTACT: Flush with

                                                                                                  water for 15 minutes and get immediate medical attention. INHALATION: Overexposure to

                                                                                                  vapors may cause dizziness or headache � move to fresh air. Consult physician if needed.

                                                                                                  INGESTION: Get immediate medical attention. KEEP OUT OF REACH OF CHILDREN.







                                                                                                                          UNDERWRITERS LABORATORIES INC.

                                                                                                                      CLASSIFIED CAULKING AND SEALANTS                                 R14175

                                                                                                                                     Surface Burning Characteristics                    ILI5

                                                                                                                             Applied To Inorganic Reinforced Cement Board*

                                                                                                                         Flame Spread 15           Smoke Developed 25

                  Remove adapter and                                                                *Tested as applied in three 3/4 in. diameter beads, 5 inches on center, covering 12.5% of the

                                                                   Attach can to gun

                                          Spray cleaner directly

                  attach to top of can                                                              exposed test sample area. The material is packaged under pressure. Investigation did not

                                                                   basket to remove

                                          on top of gun for

                  for easy use.                                                                     include evaluation of either the pressurized containers or the material prior to dispensing.

                                                                   foam from gun barrel.

                                          foam removal.









                                                                                                                                                                                  Pallet Qty.

                                                              Case Pack

                                         Item #

        Product                                                                                                          Master Carton

                                                                                           Unit UPC Code                                                 Case Weight

 Gun Foam II                       4004528712                  12 / 24 oz.                                                                                                               72

                                                                                                                       1 00 75650 00121 6                      23.5

                                                                                           0 75650 00121 9

 Poly-Clean (US/Canada)            4004712022                  12 / 12 oz.                                                                                                              108

                                                                                                                       1 00 75650 00015 8                       13

                                                                                           0 75650 00015 1









                                                                                                                                                                                  MK-004 (03-06)