PRODUCT DATA









All Seasons

Polyurethane Foam Sealant

                            This is a one-component expanding

                            low pressure foam sealant specially

                            formulated to cure in a wide range of

                            temperatures (20°F - 120°F). It seals

                            gaps and cracks, providing airtight

                            insulation that stops air infiltration

                            permanently.

                            � Cures in temperatures as low as 20°F

                              (-7°C) and as high as 120°F (49°C)

                            � Superior performance in high temp-

                              low humidity environments

                            � For professional use, gun applications

                            � Low curing pressure

                            � Creates a moisture barrier

                            � Outperforms fiberglass

                            � Save energy and money - reduce

                              heating and A/C bills

                            � Contains fire retardant

                                                                                                   DIRECTIONS

                                                                                                   Read all directions and cautions before use.

                                                                                                   For additional information, please see package

                          All Seasons                                                              label or MSDS.

                          Polyurethane Foam Sealant

                                                                                                   �       SURFACE PREP: Surface should be free of

                                                                                                           dirt, oil, grease and excess moisture.

TECHNICAL DATA

                                                                                                   �       SET-UP: Attach applicator gun to can (do not

    Density:1.6-2.1 lbs./cu. ft.

                                                                                                           overtighten), then shake well for 30 seconds.

    Percent Closed Cell Content: 70%

                                                                                                   �       APPLICATION: Dispense foam with can upside

    Thermal Resistance: (ASTM C-518)

                                                                                                           down, testing bead size on scrap material first.

    R-Value � 4.5 per inch thickness

                                                                                                           Fill area about 1/3 full, leaving room for foam to

                                                                                                           expand. Note: To improve curing in arid regions,

    Maximum Service Temperature of Cured

                                                                                                           spray a light water mist into the cavity before

    Foam: 240° F (116° C)

                                                                                                           applying foam.

    ASTM E-84 , Class 1 Foam

                                                                                                   �       STORE UPRIGHT (50°-100°F)

    Shelf Life: 12 months

                                                                                                   �       FOAM BONDS TO SKIN QUICKLY. Wear gloves,

    Contains no urea formaldehyde

                                                                                                           eye protection and work clothes; use drop cloths.

                                                                                                   �       FOR BEST RESULTS use in temperatures

                                                                                                           40° - 100° F (50% relative humidity); however,

                                                                                                           this product may be used where surface

                                                                                                           temperatures are as low as 20°F without

                                                                                                           becoming friable. Can temperature should be

                                                                                                           60°-90°F during use.

         YIELD ESTIMATE TABLE

  Size(Volume)    Bead Diameter           Linear Feet

                                                                                                   �       FINISH: Foam will be tack-free in about 10

  24 oz. can                                 2150

                        1/4�

                                                                                                           minutes (50% RH). Excess can be trimmed in

                                              977

                        3/8�

                                                                                                           about 30 minutes. Cover or paint foam surfaces

ASTM C-1536

                                                                                                           exposed to sunlight.



                                                                                                   �       CAN CHANGEOVER: Once started, do not

                                                                                                           remove gun until can is empty; then purge gun

                                                                                                           and remove can. Clean gun thoroughly with

                                                                                                           acetone or polyurethane foam cleaner. Do not

also available                                                                                             allow foam to harden in gun.

                  Poly-Clean

                                                                                                                ASTM E-84 SURFACE BURNING CHARACTERISTICS

                  Polyurethane Foam Cleaner

                                                                                                                            Flame Spread 5           Smoke Developed 10

                  � Removes wet foam from hands, tools and                                             Tested as applied in four 1/2 inch diameter beads, 5 inches on center, covering 8.3% of the

                    foam applicator guns                                                               exposed test sample area. The test results do not reflect the hazards by this material under

                                                                                                       actual fire conditions.

                  � Trilingual label (English, Spanish, French)

                                                                                                  CAUTION: Contains Polymeric MDI, Polyurethane Resin & Propane / Isobutane. Cured foam

                                                                                                  exposed to temperatures in excess of 240°F (116°C) may release hazardous decomposition

                                                                                                  products. Keep away from heat, sparks, flames and static electricity. Turn off sources of ignition

                                                                                                  (pilot light, etc.). Ventilate work area with moving, fresh air. Vapors heavier than air may cause

                                                                                                  flash fire or ignite explosively. Do not puncture, expose to heat or store at temperatures above

                                                                                                  120°F (49°C). Do not leave in auto. Wear protective gloves, safety glasses, work clothes.



                                                                                                  FIRST AID TREATMENT - SKIN CONTACT: DO NOT RINSE WITH WATER (water helps curing).

                                                                                                  If foam is wet: remove immediately with acetone or polyurethane foam cleaner. After removal,

                                                                                                  wash with soap and water. If foam has dried: it is very difficult to remove. Do not try to remove

                                                                                                  with solvents. Cured foam wears off and is not harmful to health. EYE CONTACT: Flush with

                  Remove adapter and                               Attach can to gun

                                          Spray cleaner directly

                                                                                                  water for 15 minutes and get immediate medical attention. INHALATION: Overexposure to

                  attach to top of can                             basket to remove

                                          on top of gun for

                                                                                                  vapors may cause dizziness or headache � move to fresh air. Consult physician if needed.

                  for easy use.                                    foam from gun barrel.

                                          foam removal.

                                                                                                  INGESTION: Call a physician. KEEP OUT OF REACH OF CHILDREN.







                                                                                                                                                                                   Pallet Qty.

                                                              Case Pack

                                         Item #

        Product                                                                                                           Master Carton

                                                                                           Unit UPC Code                                                  Case Weight

  All Seasons Gun Foam              4004529812                 12 / 24 oz.                                                                                                                72

                                                                                                                        1 00 75650 00044 8                     22.88

                                                                                           0 75650 00044 1

  Poly-Clean (US/Canada)            4004712022                 12 / 12 oz.                                                                                                               108

                                                                                                                        1 00 75650 00015 8                       13

                                                                                           0 75650 00015 1









                                                                                                                                                                                  MK-006 (03-06)