PRODUCT DATA
130
Optima Super Acrylic Satin
PREMIUM 鈥? 100% ACRYLIC 鈥? EXTERIOR 鈥? SATIN 鈥? 130 LINE
Vehicle Type
Product Description Waterborne 鈥? 100% Acrylic
Optima Super Acrylic Satin is a premium brand exterior 100% acrylic Finish
latex satin paint recommended for use on a diverse number of primed and Satin 鈥? 60掳 Gloss - 4.0 to 8.0
85掳 Gloss - 30 to 40
properly prepared surfaces. The addition of zinc oxide and organic
mildewcides, combined with high volume solids, give Optima Super Use
Exterior
Acrylic Satin excellent protection against mildew. Years of testing and
exposure in the demanding southern climates have proven that Optima Percent Solids By Weight
Super Acrylic Satin's 100% acrylic resin formulation provides the ultimate 52.1% 卤 2%
performance available in acrylic latex paint technology. Optima Super Percent Solids By Volume
Acrylic Satin is designed for use in residential, architectural, commercial 37.4% 卤 2%
and light industrial applications. Suggested Coverage
300-500 SFPG
Performance
Dry Film Thickness
鈥? Superior adhesion and long term durability 1.7 mils @ 350 SFPG
鈥? Excellent resistance to mildew and organic growth
Viscosity
鈥? Excellent color retention and chalk resistance 90 KU 卤 5
鈥? Alkali and efflorescence resistant
Flash Point
鈥? Exceptional resistance to blistering, cracking, chipping and peeling Non-flammable 鈥? >200掳 F.
鈥? Dirt resistant, scrubbable and washable
VOC
鈥? Easy to apply, high hiding and excellent coverage
Contains 0.87 lbs./gal. (104 gms./ltr.)
Complies with all Federal, State
May be applied to properly primed and prepared鈥? and Local VOC standards.
Application Equipment
鈥? Concrete, Masonry and Stucco including:
Brush, roller, airless or
Brick 鈥? Cement Plaster 鈥? Concrete Masonry Units (CMU)
鈥?
conventional spray
鈥? Poured and Precast Concrete 鈥? Cementitious Siding
Drying Time
鈥? Synthetic Masonry Stucco (EIFS)
At 75掳F. / 50% RH
鈥? Wood 鈥? Plywood 鈥? Hardboard 鈥? Gypsum Wallboard 1 hour to touch
鈥? Ferrous Metals 鈥? Structural Steel 鈥? Aluminum 4 hours to recoat
鈥? Galvanized Metals Colors
White, off whites, pastels, light,
medium, deep, ultra deep, and
Specification Standards
accent colors
鈥? Performance alternate for Federal Specification:
Products Included in This Line
TT-P-19D; TT-P-96D; TT-P-97D; TT-P-1510A; TT-P-1181A 130 - White
131 - Tint White
Limitations 132 - Deep Base
133 - Ultra Deep Base
134 - Accent Base
Not recommended for steps, walkways, or other foot or vehicle traffic
143 - Congo Brown
areas. Do not use for immersion service, below grade substrates, or
147 - Yellow Base
substrates constantly in contact with moisture. Do not use in highly
corrosive or chemical environments, or areas subject to intense heat.
COLOR WHEEL PAINTS AND COATINGS
Product Index 鈥? Category 1
2814 Silver Star Road 鈥? Orlando, Florida 32808
407-293-6810 鈥? 800-749-6810 鈥? Fax 407-293-0945
Exterior Paints & Coatings
www.colorwheel.com
09900
0130.07.3 / PDS / 1
130 LINE OPTIMA SUPER ACRYLIC SATIN 鈥? PREMIUM 鈥? 100% ACRYLIC 鈥? EXTERIOR 鈥? SATIN
Surface Preparation Recommended Primers (continued)
Airless Spray: Use a tip size of between 0.015"
The performance of this product is critically New Cement-Fiber Material (HardiBoard, etc,),
and 0.021". Tip size should reflect equipment
dependent upon the soundness of the substrate Drywall and Hardboard: Can be self-primed,
type and pressure, applicator technique and
to which it is applied. It has been determined but recommend priming with 330 Optima All
surface conditions. Adjust pressure for constant
that as high as 80% of all paint and coating Prime or 335 Tropicoat Masonry Primer.
and proper atomization.
failures may be attributed to improper surface New Plywood and Cured Moisture-Free
preparation. It is essential that the proper steps Curing
Pressure Treated Wood: Prime with 330 Optima
be taken before applying this product. All Prime. Drying time and curing will affect the
General: Previously Painted Wood: Prime chalky performance of the product. Do not apply
Surface must be completely dry and in sound surfaces with 950 Ti-Gard Conditioner, 1250 when air, surface or product temperatures are
condition. Surface should be clean and free Ti-Gard Latex Conditioner or 1252 Quick Cure below 50掳 F. or above 100掳 F. Surface
from dirt, grease, mill oils, rust, mill scale, Acrylic Conditioner. Peeling surfaces when temperature must be at least 5掳 F. above dew
chalky paint, efflorescence, organic growth, properly prepared may be primed with 330 point. Plan ahead and avoid applying when
mildew, and foreign matter to insure good Optima All Prime, 531 Tropicoat Quick Prime damp or threatening weather is expected.
adhesion of primers and/or finish coats. Peeling, or self primed when in good condition. Product must cure at least 8 hours before being
cracking, and chipping paint should be removed subjected to moisture. During extremely warm
New Ferrous Metal and Rusted Metal: Remove
by sandblasting, power tool cleaning, hand weather, maintaining a wet edge may become
all rust and mill scale then prime with 635 Line
tool cleaning, pressure washing, scraping, or difficult. Avoid application during the heat of
Ironize Inhibitive Primer or 1635 Line Aquatec
wire brushing. All glossy surfaces should be the day. During cool weather, be aware of
Waterborne Industrial Primer.
sanded or de-glossed. Feather sand rough possible surfactant leaching. Do not apply late
New Galvanized Metal and Aluminum:
edges of previously painted surfaces and spot in the day where dew or condensation may
Clean per SSPC-SP1 Solvent Cleaning or use a
prime bare areas. Any deteriorated or failed form before product begins to cure. Allow this
degreasing cleaner. Wipe clean with lint free
sealant and/or patching compound should be product to cure a minimum of 30 days before
cloth. All mill oils must be removed. Neutralize
removed and replaced. All unpainted substrates cleaning.
with appropriate wash primer. Rinse
should be properly prepared according to
Safety
thoroughly, then prime with 330 Optima
respective manufacturer鈥檚 and/or supplier鈥檚
All Prime or 1635 Line Aquatec Waterborne
recommendations. Thoroughly review and WARNING! HARMFUL IF INHALED. SEE
Industrial Primer.
follow Color Wheel 鈥淪urface Preparation LABEL OR MSDS FOR LIST OF HAZARDOUS
Previously Painted Metals: Prime chalky
Guidelines鈥? and/or Color Wheel written INGREDIENTS. KEEP OUT OF REACH OF
surfaces with 950 Ti-Gard Conditioner, 1250
specification before applying. CHILDREN! May cause eye, skin, nose and
Ti-Gard Latex Conditioner or 1252 Quick Cure
Recommended Primers throat irritation. To avoid breathing vapors or
Acrylic Conditioner. Peeling surfaces when spray mist, open windows and doors or use
New Masonry and Stucco: Hot Stucco (three properly prepared may be primed with 635 other means to insure fresh air entry during
(3) days after stucco application or with a pH Line Ironize Inhibitive Primer, 330 Optima All application and drying. If you experience eye
Range of between 8-12) use 1252 Quick Cure Prime, 1635 Line Aquatec Waterborne watering, headaches or dizziness, increase fresh
Acrylic Conditioner or 1240 Line Flex Lox Industrial Primer or self primed when in good air or wear respiratory protection (NIOSH/
Exterior Coating. Prime alkaline masonry (pH condition. MSHA TC 23C or equivalent) or leave area.
Range: 8-10) with 330 Optima All Prime, 335
Close container after each use. Avoid contact
General Application
Tropicoat Masonry Primer or 1240 Line Flex
with eyes and skin.
Lox Exterior Coating. Prime non-alkaline Mix thoroughly to a uniform consistency before
masonry with 330 Optima All Prime, 335 First Aid
each use. Apply by brush, roller or airless
Tropicoat Masonry Primer, 1240 Line Flex Lox sprayer. Work material vigorously into pores. If you experience difficulty in breathing, leave
Exterior Coating or self prime. Prime porous Maintain a wet edge. If roller application is the area to obtain fresh air. If continued difficulty
masonry (CMU) with 250 Ti-Gard Masonry employed on porous surfaces, final passes is experienced, get medical assistance
Filler or 3250 Hi-Build Block Filler. should be completed in a downward direction immediately. In case of eye contact, flush
to insure a uniform appearance and texture.
Synthetic Masonry Stucco (EIFS): Prime with immediately with large amounts of fresh water
Apply at such a rate as to avoid runs and sags.
330 Optima All Prime, 1250 Ti-Gard Latex for at least 15 minutes and get medical attention;
If airless spray application is employed on
Conditioner or 1252 Quick Cure Acrylic for skin, wash thoroughly with soap and water.
porous surfaces, immediate 鈥渂ack rolling鈥? and
Conditioner. Surfaces in good condition may If swallowed, DO NOT INDUCE VOMITING.
鈥渂ack brushing鈥? with wet roller/brush is
be self primed when properly prepared. Get medical attention immediately.
recommended to help reduce pinholing and
Previously Painted Masonry, Stucco,
Storage and Handling
work material into pores.
Hardboard, EIFS and Cement-Fiber Material
(HardiBoard, etc,): Prime chalky surfaces Keep from freezing or exposure to intense heat.
Thinning:
with 950 Ti-Gard Conditioner, 1250 Ti-Gard Do not transfer contents to unlabeled container.
Under normal conditions thinning is not
Latex Conditioner or 1252 Quick Cure Acrylic recommended.
Technical Services
Conditioner. Surfaces in good condition may Clean-Up:
Color Wheel Paints and Coatings offers and
be self primed when properly prepared. Clean all tools and equipment with warm,
encourages the use of our free technical service.
New Wood: Can be self-primed, but recommend soapy water immediately after use. Flush spray
We also advise you to contact us regularly for
priming with 330 Optima All Prime, 335 equipment thoroughly.
updates to this and other technical data. For
Tropicoat Masonry Primer or 531 Tropicoat
Application Equipment technical assistance, to arrange a consultation
Quick Prime for bleeding woods which may
with a Sales Representative, or for current
require two coats of primer. Brush: Use a quality nylon or polyester brush.
technical data, consult your yellow pages for
Roller: Use lambswool or synthetic cover:
the Color Wheel location nearest you, or call
3/8" to 1 1/4" nap, depending on surface texture.
toll free (800) 749-6810.
All technical advice, recommendations, and services are rendered by Color Wheel gratis. They are based on technical data which Color Wheel believes to be reliable, and are intended for use by persons having skill and knowhow at their own discretion and
risk. Color Wheel Paint Manufacturing Company, Inc. assumes no responsibility for results obtained or damages incurred from their use by purchaser/user in whole or in part. All information is subject to change without notice.
NOTE: Where applicable, and for consistency, technical data and test results contained in this document are based on the pure white base of the particular product line.
LIMITATION OF LIABILITY: COLOR WHEEL MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability, if any, is limited to replacement of the product or refund of the purchase price. LABOR OR COST OF LABOR AND OTHER CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED.
09900 0130.07.3 / PDS / 2
|