PRODUCT DATA
3942
UltraCrete First-Step Substrate Primer
CONTRACTOR鈥橲 CHOICE 鈥? COPOLYMER RESIN 鈥? 3942
Vehicle Type
Product Description Waterbourne 鈥? Copolymer Resin
UltraCrete First-Step Substrate Primer is a quality waterborne copolymer
Use
resin primer for use as a bonding coat for UltraCrete Spray Deck bag mix
Interior / Exterior
or other portland cement compositions, specifically for concrete
Percent Solids By Weight
decking overlayments. UltraCrete First-Step Substrate Primer is suitable
31.8% 卤 2%
for both new and existing cementitious surfaces. UltraCrete First-Step
Substrate Primer is designed to add excellent strength and bonding
Percent Solids By Volume
characteristics when used with the UltraCrete Spray Deck system. 29.6% 卤 2%
Flash Point
Performance
Non-flammable 鈥? >200掳 F.
鈥? Suitable for new and existing cementitious surfaces
鈥? Good resistance to mildew and organic growth VOC
鈥? Excellent bonding characteristics Contains 0 lbs./gal. (0 gms./ltr.)
Complies with all Federal, State
鈥? Provides decorative finish
and Local VOC standards.
鈥? Scrubbable and washable
鈥? Good flow and leveling Application Equipment
Brush, roller, airless spray, or low
鈥? Easy to mix when used with Ultracrete Ultra Stamp
pressure (pump-up type) sprayer
鈥? Easy to apply
Drying Time
Allow 4 hours before recoating.
Do not wait more than 48 hours.
May be applied to properly prepared鈥?
Colors
鈥? New Concrete and Masonry (Horizontal)
Clear
鈥? Existing Concrete and Masonry (Horizontal)
Products Included in This Line
3942- Clear
Limitations
鈥? D O N O T apply when air or substrate temperature is below 50掳F
(10掳C) or above 100掳F (37掳C).
鈥? D O N O T use in corrosive or chemical environments, or areas
subject to intense heat.
COLOR WHEEL PAINT MANUFACTURING COMPANY, INC.
Product Index 鈥? Category 9
2814 Silver Star Road 鈥? Orlando, Florida 32808
407-293-6810 鈥? 800-749-6810 鈥? Fax 407-293-0945
Miscellaneous Products
www.colorwheel.com
09900
3942.2004.1 / PDS / 1
3942 ULTRACRETE FIRST-STEP SUBSTRATE PRIMER 鈥? CONTRACTOR鈥橲 CHOICE 鈥? COPOLYMER RESIN 鈥? CLEAR
Surface Preparation General Application First Aid
The performance of this product is critically Stir thoroughly before each use. Apply at 200 If you experience difficulty in breathing,
dependent upon the soundness of the substrate to 300 square feet per gallon depending on leave the area to obtain fresh air. If continued
to which it is applied. It has been determined porosity. Allow four hours dry time before difficulty is experienced, get medical
that as high as 80% of all paint and coating recoating and no longer than twenty-four hours. assistance immediately. In case of eye
failures may be attributed to improper surface contact, flush immediately with large
Thinning:
preparation. It is essential that the proper steps amounts of fresh water for at least 15 minutes
Does not require thinning.
be taken before applying this product. and get medical attention; for skin, wash
Clean-Up:
thoroughly with soap and water. If
General: Clean all tools and equipment with warm,
Surface must be completely dry and in sound swallowed, DO NOT INDUCE VOMITING.
soapy water immediately after use. Flush spray
condition. Surface should be clean and free Get medical attention immediately.
equipment thoroughly.
from dirt, grease, mill oils, rust, mill scale, See bag mix instructions for additional
Application Equipment
chalky paint, efflorescence, organic growth, information.
Apply by brush, roller, airless spray, or low
mildew, and foreign matter to insure good Storage and Handling
pressure (pump-up type) sprayer.
adhesion of primers and/or finish coats. Peeling, Keep from freezing or exposure to intense
Curing
cracking, and chipping paint should be removed heat. Do not transfer contents to unlabeled
Drying time and curing will affect the
by sandblasting, power tool cleaning, hand container.
performance of the product. Do not apply
tool cleaning, pressure washing, scraping, or See bag mix instructions for additional
when air, surface or product temperatures are
wire brushing. All glossy surfaces should be information.
below 50掳 F. or above 100掳 F. Surface
sanded or de-glossed. Feather sand rough edges
Technical Services
temperature must be at least 5掳 F. above dew
of previously painted surfaces and spot prime
Color Wheel Paints and Coatings offers and
point. Plan ahead and avoid applying when
bare areas. Any deteriorated or failed sealant
encourages the use of our free technical
damp or threatening weather is expected.
and/or patching compound should be removed
service. We also advise you to contact us
Environmentally Safe Formula
and replaced. All unpainted substrates should
regularly for updates to this and other
be properly prepared according to respective Does not exceed 2.1 lbs. per gallon / 250 grams
technical data. For technical assistance, to
manufacturer鈥檚 and/or supplier鈥檚 per litre maximum volatile organic compound
arrange a consultation with a Sales
recommendations. Thoroughly review and (VOC). Meets and complies with all VOC
Representative, or for current technical data,
follow Color Wheel 鈥淪urface Preparation regulations.
consult your yellow pages for the Color
Guidelines鈥? and/or Color Wheel written Safety Wheel location nearest you, or call toll free
specification before applying. WARNING! HARMFUL IF INHALED OR (800) 749-6810.
See bag mix instructions for additional SWALLOWED. SEE LABEL OR MSDS FOR
information. LIST OF HAZARDOUS INGREDIENTS. KEEP
OUT OF REACH OF CHILDREN! May cause
eye, skin, nose and throat irritation. Avoid
breathing vapors or spray mist during mixing
and application. If you experience eye watering,
headaches or dizziness, increase fresh air or
wear respiratory protection (NIOSH/MSHA TC
23C or equivalent) or leave area. Close container
after each use. Avoid contact with eyes and
skin.
All technical advice, recommendations, and services are rendered by Color Wheel gratis. They are based on technical data which Color Wheel believes to be reliable, and are intended for use by persons having skill and knowhow at their own discretion and risk.
Color Wheel Paint Manufacturing Company, Inc. assumes no responsibility for results obtained or damages incurred from their use by purchaser/user in whole or in part. All information is subject to change without notice.
NOTE: Where applicable, and for consistency, technical data and test results contained in this document are based on the pure white base of the particular product line.
LIMITATION OF LIABILITY: COLOR WHEEL MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability, if any, is limited to replacement of the product or refund of the purchase price. LABOR OR COST OF LABOR AND OTHER CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED.
09900 3942.2004.1 / PDS / 2
|