PRODUCT DATA
1600
Aquatec Industrial Acrylic Enamel
VOC COMPLIANT 鈥? INTERIOR/ EXTERIOR 鈥? SEMI-GLOSS 鈥? 1600 LINE
Vehicle Type
Product Description Waterborne 鈥? Styrene Acrylic
Aquatec Industrial Acrylic Enamel is a superior quality interior/exterior
Finish
industrial acrylic semi-gloss enamel paint recommended for use on a
Semi-Gloss 鈥? 60藲 gloss: 50 to 70
diverse number of properly primed and prepared surfaces. Aquatec
Industrial Acrylic Enamel is a low VOC and low odor formulation with Use
Interior / Exterior
chemical and corrosion resistant properties. Aquatec Industrial Acrylic
Enamel is designed for use in architectural, commercial and industrial
Percent solids by weight
applications.
54.8% 卤 2%
Performance Percent solids by volume
42.5% 卤 2%
鈥? Extremely tough and durable with excellent adhesion
鈥? Chemical & corrosion resistant Suggested Coverage
鈥? 300-500 SFPG
Outstanding resistance to blistering, cracking, chipping and peeling
鈥? Flash rust resistant
Dry Film Thickness
鈥? Fast dry, scrubbable and washable 1.6 mils @ 425 SFPG
May be applied to properly primed and prepared... Viscosity
80 KU 卤 5
鈥? Structural Steel 鈥? Aluminum 鈥? Galvanized Metals
鈥? Ferrous Metals 鈥? Copper 鈥? Stainless Steel Flash Point
Non-flammable 鈥? > 200藲 F.
鈥? *Wood 鈥? *Plywood 鈥? Gypsum Wallboard
鈥? *Concrete, Masonry and Stucco including: VOC
Contains 1.0 lbs./gal.(120 gms./ltr.)
鈥? Brick 鈥? Cement Plaster 鈥? Concrete Masonry Units (CMU)
Complies with all Federal, State,
鈥? Poured and Precast Concrete (*See Limitations)
and Local VOC standards.
Performance Data Application Equipment
Brush, roller, airless, or
Adhesion (ferrous & nonferrous metal) ..... Excellent ........ (ASTM D3359-87)
conventional spray
Dry heat resistance ................................... 250藲 F. .......... (ASTM D2485)
Exterior durability .................................... Excellent ........
Drying Time
Flexibility ................................................. Passes ............ (ASTM D1737, 180藲 bend, 1/4" mandrel)
At 75藲 F. / 50% RH:
Moisture condensation resistance .............. Excellent ........ (ASTM D2247, 100藲 F., 500 hours)
30 minutes to touch
Pencil hardness ......................................... H ................... (ASTM D3363)
2 hours to recoat.
Salt fog resistance .................................... Excellent ........ (ASTM B117, 300 hours)
Colors
Resistance (fumes, splash, & spillage):
White, off whites, pastels, light,
Aliphatic hydrocarbon solvents...........Excellent Alkalines...................Excellent to Good
medium, deep, ultra deep and
Aromatic hydrocarbon solvents...........Poor Chlorinated solvents......................Poor
accent colors.
Diesel Fuel.........................................Excellent Fresh & salt water...................Excellent
Glycol ethers, alcohols........................Fair to Poor Oils, (cutting, vegetable, lubricating)...Excellent
Products Included in this Line
Limitations 1600 - White
1601 - Tint White
*Wood , Plywood, *Concrete, Masonry and Stucco must be primed with 1602 - Deep Base
the recommended primer listed under Section "Recommended Primer". 1603 - Ultra Deep Base
Not recommended for steps, walkways, or other foot or vehicle traffic 1604 - Accent Base
areas. Do not use for immersion service, below grade substrates, or 1612 - Black
substrates constantly in contact with moisture. Do not use in extremely 1662 - Safety Orange
corrosive or chemical environments, or areas subject to intense heat. 1663 - Safety Yellow
1664 - Safety Red
1665 - Safety Blue
1666 - Safety Green
COLOR WHEEL PAINT MANUFACTURING COMPANY, INC.
Product Index 鈥? Category 8
2814 Silver Star Road 鈥? Orlando, Florida 32808
407-293-6810 鈥? 800-749-6810 鈥? Fax 407-293-0945
Industrial Products
www.colorwheelpaint.com
09900
2001.1 / PDS / 1
1600 LINE AQUATEC INDUSTRIAL ACRYLIC ENAMEL 鈥? VOC COMPLIANT 鈥? INTERIOR / EXTERIOR 鈥? SEMI-GLOSS
Recommended Primers - Exterior Application Equipment
Surface Preparation
Exterior - New Masonry and Stucco: Hot Stucco Brush: Use a quality nylon or polyester brush.
The performance of this product is critically
(three (3) days after application) use 1252 Quick
dependent upon the soundness of the substrate to Roller: Use lambswool or synthetic cover:
which it is applied. It has been determined that as Cure Acrylic Conditioner. Prime alkaline masonry 3/8" to 1 1/4" nap, depending on surface texture.
high as 80% of all paint and coating failures may (pH Range: 8-10) with 330 Optima All Prime, 335 Airless Spray: Use a tip size of between 0.015"
be attributed to improper surface preparation. It is Tropicoat Masonry Primer or 952 Fas-Gard and 0.021". Tip size should reflect equipment type
essential that the proper steps be taken before Conditioner. Prime non-alkaline masonry with and pressure, applicator technique and surface
applying this product.
330 Optima All Prime, 335 Tropicoat Masonry conditions. Adjust pressure for constant and proper
General:
Primer or self prime. Prime porous masonry with atomization.
Surface must be completely dry and in sound
Curing
250 Ti-Gard Masonry Filler or 3250 Hi-Build
condition. Surface should be clean and free
Block Filler. Drying time and curing will affect the performance
from dirt, grease, mill oils, rust, mill scale,
Exterior - Previously Painted Masonry and Stucco:
chalky paint, efflorescence, organic growth, of the product. Do not apply when air, surface or
mildew, and foreign matter to insure good Prime chalky surfaces with 950 Ti-Gard product temperatures are below 50藲 F. or above
adhesion of primers and/or finish coats. Conditioner, 1250 Ti-Gard Latex Conditioner or 100藲 F. Surface temperature must be at least 5藲 F.
Peeling, cracking, and chipping paint should 1252 Quick Cure Acrylic Conditioner. Surfaces in above dew point. Plan ahead and avoid applying
be removed by sandblasting, power tool good condition may be self primed when properly when damp or threatening weather is expected.
cleaning, hand tool cleaning, pressure
prepared. Product must cure at least 8 hours before being
washing, scraping, or wire brushing. All glossy
Exterior - New Wood and Plywood : Must be subjected to moisture. During extremely warm
surfaces should be sanded or de-glossed.
primed with 330 Optima All Prime. Bleeding weather, maintaining a wet edge may become
Feather sand rough edges of previously painted
woods may require two coats of primer. difficult. Avoid application during the heat of the
surfaces and spot prime bare areas. Any
Exterior - Previously Painted Wood: Prime with
deteriorated or failed sealant and/or patching day. During cool weather, be aware of possible
compound should be removed and replaced. 330 Optima All Prime. Surfaces in good condition surfactant leaching. Do not apply late in the day
All unpainted substrates should be properly may be self primed when properly prepared. where dew or condensation may form before
prepared according to respective manufacturer鈥檚 Metal Primers - Interior & Exterior product begins to cure. Allow this product to cure
and/or supplier鈥檚 recommendations. Thoroughly
New Ferrous Metal and Rusted Metal: Remove all a minimum of 30 days before cleaning.
review and follow Color Wheel 鈥淪urface
Safety
rust and mill scale then prime with 635 Line
Preparation Guidelines鈥? and/or Color Wheel
Ironize Inhibitive Primer or 1635 Line Aquatec WARNING! HARMFUL IF INHALED.
written specification before applying.
Waterborne Industrial Primer. SEE LABEL OR MSDS FOR LIST OF HAZARDOUS
Recommended Primers - Interior
New Non-Ferrous Metals; Galvanized, Copper INGREDIENTS. KEEP OUT OF REACH OF
Interior - New Plaster and Gypsum Wallboard:
Stainless Steel and Aluminum: CHILDREN! May cause eye, skin, nose and throat
Allow plaster to cure and be sure all drywall joint
Clean per SSPC-SP1 Solvent Cleaning or use a irritation. To avoid breathing vapors or spray mist,
compound is thoroughly dry and cured. Prime
degreasing cleaner. Wipe clean with lint free open windows and doors or use other means to
with 430 Ti-Gard Interior Sealer, 330 Optima All
cloth. All mill oils must be removed. Neutralize insure fresh air entry during application and drying.
Prime, 830 Gloss Prep Undercoat, 831 Gloss Prep
with vinegar or appropriate wash primer.
Fast Dry Undercoat or 8300 Gloss Prep Waterborne If you experience eye watering, headaches or
Undercoat. Rinse thoroughly, then prime with 1635 Line dizziness, increase fresh air or wear respiratory
Interior - Previously Painted Plaster and Aquatec Waterborne Industrial Primer. protection (NIOSH/MSHA TC 23C or equivalent)
Wallboard: Prime with 430 Ti-Gard Interior Sealer, Previously Painted Metals: Prime with 635 Line or leave area. Close container after each use.
330 Optima All Prime, 830 Gloss Prep Undercoat,
Ironize Inhibitive Primer or 1635 Line Aquatec Avoid contact with eyes and skin.
831 Gloss Prep Fast Dry Undercoat or 8300 Gloss
First Aid
Waterborne Industrial Primer. Surfaces in good
Prep Waterborne Undercoat. Surfaces in good
condition may be self primed when properly If you experience difficulty in breathing, leave the
condition may be self primed when properly
prepared. area to obtain fresh air. If continued difficulty is
prepared.
General Application experienced, get medical assistance immediately.
Interior - New Concrete and Masonry : Prime
alkaline masonry (pH Range: 8-10) with 330 Mix thoroughly to a uniform consistency before In case of eye contact, flush immediately with
Optima All Prime, 952 Fas-Gard Conditioner or each use. Apply by brush, roller or airless sprayer. large amounts of fresh water for at least 15 minutes
1252 Quick Cure Acrylic Conditioner. Prime Work material vigorously into pores. Maintain a and get medical attention; for skin, wash thoroughly
non-alkaline masonry with 430 Ti-Gard Interior wet edge. If roller application is employed on with soap and water. If swallowed, DO NOT
Sealer, 330 Optima All-Prime, 8300 Gloss Prep
porous surfaces, final passes should be completed INDUCE VOMITING. Get medical attention
Waterborne Undercoat or self prime. Prime porous
in a downward direction to insure a uniform immediately.
masonry with 250 Ti-Gard Masonry Filler or 3250
Storage and Handling
appearance and texture. Apply at such a rate as to
Hi-Build Block Filler.
avoid runs and sags. If airless spray application is Keep from freezing or exposure to intense heat. Do
Interior - Previously Painted Masonry: Prime with
employed on porous surfaces, immediate 鈥渂ack not transfer contents to unlabeled container.
430 Ti-Gard Interior Sealer, 330 Optima All
Technical Services
rolling鈥? and 鈥渂ack brushing鈥? with wet roller/brush
Prime, or 8300 Gloss Prep Waterborne Undercoat.
Surfaces in good condition may be self primed is recommended to help reduce pinholing and Color Wheel Paints and Coatings offers and
when properly prepared. work material into pores. encourages the use of our free technical service.
Interior - New Wood and Plywood: Prime with Thinning: We also advise you to contact us regularly for
830 Gloss Prep Undercoat, 831 Gloss Prep Fast
Under normal conditions thinning is not updates to this and other technical data. For
Dry Undercoat or 8300 Gloss Prep Waterborne
recommended. technical assistance, to arrange a consultation
Undercoat. Bleeding woods may require two coats
Clean-Up: with a Sales Representative, or for current
of primer.
Clean all tools and equipment with warm, soapy technical data, consult your yellow pages for
Interior - Previously Painted Wood: Prime with
water immediately after use. Flush spray equipment
830 Gloss Prep Undercoat, 831 Gloss Prep Fast the Color Wheel location nearest you, or call
Dry Undercoat or 8300 Gloss Prep Waterborne thoroughly. toll free (800) 749-6810.
Undercoat. Surfaces in good condition may be self
primed when properly prepared.
All technical advice, recommendations, and services are rendered by Color Wheel gratis. They are based on technical data which Color Wheel believes to be reliable, and are intended for use by persons having skill and knowhow at their own discretion and risk.
Color Wheel Paint Manufacturing Company, Inc. assumes no responsibility for results obtained or damages incurred from their use by purchaser/user in whole or in part. All information is subject to change without notice.
NOTE: Where applicable, and for consistency, technical data and test results contained in this document are based on the pure white base of the particular product line.
LIMITATION OF LIABILITY: COLOR WHEEL MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability, if any, is limited to replacement of the product or refund of the purchase price. LABOR OR COST OF LABOR AND OTHER CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED.
09900 2001.1 / PDS / 2
|