PRODUCT DATA
3952
UltraCrete Spray Deck Resin
CONTRACTOR鈥橲 CHOICE 鈥? 100% ACRYLIC 鈥? LIQUID RESIN 鈥? 3952
Vehicle Type
Product Description Waterbourne 鈥? 100% Acrylic
UltraCrete Spray Deck Resin is a quality waterborne 100% acrylic
Use
resins for use as an additive with the UltraCrete Spray Deck or other
Interior / Exterior
portland cement compositions, specifically for concrete decking
Percent Solids By Weight
overlayments. UltraCrete Spray Deck Resin is a non-concentrate
32.0% 卤 2%
formula. Provides excellent bonding characteristics when mixed
with UltraCrete Spray Deck or other portland cement compositions
Percent Solids By Volume
suitable for both new and existing cementitious surfaces. When 29.3% 卤 2%
UltraCrete Spray Deck Resin is mixed with UltraCrete Spray Deck
Flash Point
or other portland cement compositions, it will transform concrete
Non-flammable 鈥? >200掳 F.
and masonry surfaces into a decorative textured finish.
VOC
Performance Contains .03 lbs./gal. (0.35 gms./ltr.)
Complies with all Federal, State
(after mixing with UltraCrete Spray Deck or other portland cement compositions)
and Local VOC standards.
鈥? Suitable for new and existing cementitious surfaces
鈥? Application Equipment
Good resistance to mildew and organic growth
Use bag mix information
鈥? Excellent bonding characteristics
鈥? Provides decorative finish
Drying Time
鈥? Scrubbable and washable Use bag mix information
鈥? Good flow and leveling
Colors
鈥? Easy to mix when used with Ultracrete Spray Deck Clear
鈥? Easy to apply
Products Included in This Line
3952- Clear (Non-Concentrate)
After mixing with UltraCrete Spray Deck or other portland cement
compositions it may be applied to properly prepared鈥?
鈥? New Concrete and Masonry (Horizontal or Vertical)
鈥? Existing Concrete and Masonry (Horizontal or Vertical)
Limitations
Limitations will apply the same as on bag mix. Do not use in corrosive or
chemical environments, or areas subject to intense heat.
COLOR WHEEL PAINT MANUFACTURING COMPANY, INC.
Product Index 鈥? Category 9
2814 Silver Star Road 鈥? Orlando, Florida 32808
407-293-6810 鈥? 800-749-6810 鈥? Fax 407-293-0945
Miscellaneous Products
www.colorwheelpaint.com
09900
3952.2002.1.3 / PDS / 1
3952 ULTRACRETE SPRAY DECK RESIN 鈥? CONTRACTOR鈥橲 CHOICE 鈥? 100% ACRYLIC 鈥? LIQUID RESIN 鈥? CLEAR
Surface Preparation General Application First Aid
The performance of this product is critically See bag mix instructions for additional If you experience difficulty in breathing,
dependent upon the soundness of the substrate information. leave the area to obtain fresh air. If continued
to which it is applied. It has been determined difficulty is experienced, get medical
Thinning:
that as high as 80% of all paint and coating assistance immediately. In case of eye
Use bag mix instructions.
failures may be attributed to improper surface contact, flush immediately with large
Clean-Up:
preparation. It is essential that the proper steps amounts of fresh water for at least 15 minutes
Clean all tools and equipment with warm,
be taken before applying this product. and get medical attention; for skin, wash
soapy water immediately after use. Flush spray
thoroughly with soap and water. If
General: equipment thoroughly.
Surface must be completely dry and in sound swallowed, DO NOT INDUCE VOMITING.
Application Equipment
condition. Surface should be clean and free Get medical attention immediately.
Use bag mix instructions.
from dirt, grease, mill oils, rust, mill scale, See bag mix instructions for additional
Curing
chalky paint, efflorescence, organic growth, information.
Drying time and curing will affect the
mildew, and foreign matter to insure good Storage and Handling
performance of the product. Do not apply
adhesion of primers and/or finish coats. Peeling, Keep from freezing or exposure to intense
when air, surface or product temperatures are
cracking, and chipping paint should be removed heat. Do not transfer contents to unlabeled
below 50掳 F. or above 100掳 F. Surface
by sandblasting, power tool cleaning, hand container.
temperature must be at least 5掳 F. above dew
tool cleaning, pressure washing, scraping, or See bag mix instructions for additional
point. Plan ahead and avoid applying when
wire brushing. All glossy surfaces should be information.
damp or threatening weather is expected.
sanded or de-glossed. Feather sand rough edges
Technical Services
See bag mix instructions for additional
of previously painted surfaces and spot prime
Color Wheel Paints and Coatings offers and
information.
bare areas. Any deteriorated or failed sealant
encourages the use of our free technical
Safety
and/or patching compound should be removed
service. We also advise you to contact us
and replaced. All unpainted substrates should WARNING! HARMFUL IF INHALED OR
regularly for updates to this and other
be properly prepared according to respective SWALLOWED. SEE LABEL OR MSDS FOR
technical data. For technical assistance, to
manufacturer鈥檚 and/or supplier鈥檚 LIST OF HAZARDOUS INGREDIENTS. KEEP
arrange a consultation with a Sales
recommendations. Thoroughly review and OUT OF REACH OF CHILDREN! May cause
Representative, or for current technical data,
follow Color Wheel 鈥淪urface Preparation eye, skin, nose and throat irritation. Avoid
consult your yellow pages for the Color
Guidelines鈥? and/or Color Wheel written breathing vapors or spray mist during mixing
Wheel location nearest you, or call toll free
specification before applying. and application. If you experience eye watering,
(800) 749-6810.
See bag mix instructions for additional headaches or dizziness, increase fresh air or
information. wear respiratory protection (NIOSH/MSHA TC
23C or equivalent) or leave area. Close container
after each use. Avoid contact with eyes and
skin.
See bag mix instructions for additional
information.
All technical advice, recommendations, and services are rendered by Color Wheel gratis. They are based on technical data which Color Wheel believes to be reliable, and are intended for use by persons having skill and knowhow at their own discretion and risk.
Color Wheel Paint Manufacturing Company, Inc. assumes no responsibility for results obtained or damages incurred from their use by purchaser/user in whole or in part. All information is subject to change without notice.
NOTE: Where applicable, and for consistency, technical data and test results contained in this document are based on the pure white base of the particular product line.
LIMITATION OF LIABILITY: COLOR WHEEL MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability, if any, is limited to replacement of the product or refund of the purchase price. LABOR OR COST OF LABOR AND OTHER CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED.
09900 3952.2002.1.3 / PDS / 2
|