PRODUCT DATA
3930
UltraCrete Ultra Stamp
PROPRIETARY POLYMER 鈥? DECORATIVE FINISH 鈥? 3930
Vehicle Type
Product Description
Proprietary Polymer
UltraCrete Ultra Stamp is an overlay material formulated for resurfacing
Use
interior or exterior concrete. UltraCrete Ultra Stamp is a factory blend of
Interior / Exterior
special materials that, when mixed with 3935 UltraCrete Ultra Stamp Resin
Fortifier, forms a thin concrete coating that has excellent wear resistance.
Flash Point
UltraCrete Ultra Stamp when used on a properly prepared surface that has
Non-flammable 鈥? >200掳 F.
been properly primed with 3942 UltraCrete First-Step Substrate Primer, will
transform concrete surfaces into many unique designs, textures, patterns and VOC
colors which will permanently bond to concrete surfaces and will not Contains .03 lbs./gal. (0.35 gms./ltr.)
delaminate. UltraCrete Ultra Stamp is designed to be used by professionals Complies with all Federal, State and
that have been trained in the installation of concrete overlays. Local VOC standards.
Application Equipment
Performance
Gage Rake or Hand Trowel
(after blending 3930 UltraCrete Ultra Stamp with 3935 UltraCrete Ultra Stamp Resin Fortifier)
鈥? Drying Time
Suitable for new and existing cementitious surfaces
鈥? At 75掳F. / 50% RH
Good resistance to mildew and organic growth
1 - 2 hour to touch
鈥? Excellent wear resistance
2 - 3 days for normal use
鈥? Excellent bonding characteristics 5 - 7 days for high use or light vehicle
鈥? Provides a decorative finish traffic. Drying time is per coat
depending on conditions.
鈥? Provides a cooler surface
鈥? Scrubbable and washable Packaging
鈥? Easy application for many designs, colors and texture 50 lb. (22.7 kg.) Multi-ply Bag
Coverage
May be applied to properly prepared鈥? One 50 lb. (22.7 kg.) bag covers a solid
23 sq. ft. area at 1/4" thick.
鈥? New Concrete and Masonry (Horizontal)
鈥? Existing Concrete and Masonry (Horizontal) Colors
White and a variety of other colors
with the addition of the 3960 Line
Performance Data
UltraCrete Dry Color Packs. Colors
鈥? Tensile Strength 28 day air cure 929 psi available are those on our UltraCrete
鈥? Compressive Strength color chart.
28 day air cure 10,230 psi
鈥? Flexural Strength 28 day air cure 1355 psi
Shelf Life
鈥? Shear Bond Adhesion 28 day air cure >500(C)
1 year from date of manufacture
鈥? Impact Strength 28 day air cure 48 in/lb
鈥? Abrasion Resistance 28 day air cure 1.15 Products Included in This Line
3930 UltraCrete Ultra Stamp
Limitations
Disposal
鈥? D O N O T apply when air or substrate temperature is below 50掳F Comply with all applicable local, state
(10掳C) or above 100掳F (37掳C). and federal regulations for disposal of
unusable or contaminated materials.
鈥? D O N O T use dirty water, containers or rusty tools.
Dispose of packaging/containers
鈥? D O N O T use for heavy vehicle traffic or excessive weight
according to local, state and federal
(i.e. forklifts or steel wheels). regulations.
鈥? D O N O T use in corrosive or chemical environments, or areas
subject to intense heat.
鈥? D O N O T use retarder and accelerator in combination.
COLOR WHEEL PAINT MANUFACTURING COMPANY, INC.
Product Index 鈥? Category 9
2814 Silver Star Road 鈥? Orlando, Florida 32808
407-293-6810 鈥? 800-749-6810 鈥? Fax 407-293-0945
Miscellaneous Products
www.colorwheel.com
Division 3 / 03500 - Cementitious Decks & Topping
3930.04.2 / PDS / 1
ULTRACRETE SPRAY DECK ULTRACRETE ULTRA STAMP 鈥? PROPRIETARY MODIFIED 鈥? DECORATIVE FINISH
CONTRACTOR鈥橲 CHOICE 鈥? POLYMER POLYMER 鈥? DECORATIVE FINISH
3930
Surface Preparation Mixing UltraCrete Ultra Stamp Limited Warranties
The performance of this product is critically Each 50-pound bag of UltraCrete Ultra Stamp There are no expressed or implied warranties
dependent upon the soundness of the substrate requires 1陆 gallons of water and 2 quarts of including implied warranties of
to which it is applied. It has been determined 3935 UltraCrete Ultra Stamp Resin Fortifier to merchantability or fitness for a particular
that as high as 80% of all paint and coating obtain a gage rake or trowel application with a purpose. Buyer鈥檚 remedies are limited to
failures may be attributed to improper surface thickness of up to 陆 inch over the primed replacement or refund of purchase price.
preparation. It is essential that the proper steps surface. UltraCrete 3960 Line Dry Color Packs Manufacturer assumes no liability for injuries
be taken before applying this product. may be added to the wet mix at this time. or incidental or consequential damages. User
shall determine suitability of product for
IMPORTANT NOTE: DO NOT OVER TROWEL.
General:
intended use.
Surface must be in sound condition. Surface Low Temperature Acceleration Instructions
Storage and Handling
should be clean and free from dirt, mildew, and
The addition of 3955 UltraCrete Spray Deck
foreign matter to insure good adhesion of Keep from freezing or exposure to intense
Accelerator will accelerate the mix to a normal
material. Peeling, cracking, and chipping paint heat. Do not transfer contents to unlabeled
set. Use chart below for number of ounces
should be removed by sandblasting or scarifing. container.
needed.
Any deteriorated or failed sealant and/or
Temperatures Ounces of Accelerator Safety
patching compound should be removed and
replaced. All unpainted substrates should be 80掳F + 0.39 oz. WARNING! HARMFUL IF INHALED OR
properly prepared according to respective SWALLOWED. SEE LABEL OR MSDS FOR
70掳 - 79掳 0.83 oz.
manufacturer鈥檚 and/or supplier鈥檚 LIST OF HAZARDOUS INGREDIENTS. MAY
50掳 - 69掳 1.09 oz.
recommendations. Thoroughly review and CAUSE SKIN AND EYE BURN OR
33掳 - 49掳 1.66 oz.
follow Color Wheel 鈥淪urface Preparation IRRITATION. INHALATION IS KNOWN
24掳 - 33掳 2.45 oz.
Guidelines鈥? and/or Color Wheel written TO CAUSE CANCER OR DELAYED LUNG
specification before applying. INJURY. KEEP OUT OF REACH OF
DO NOT use retarder and accelerator in
CHILDREN!
combination.
Safety Procedures
Avoid contact with eyes and skin. This
Coverage
Read and understand the MSDS (Material Safety
product contains hydraulic cement and lime.
Data Sheet) before using this product. Read One 50 lb. (22.7 kg.) bag covers a solid 23 When mixed with water and/or latex, it
CAUTION OR WARNING information on the square foot area at 1/4" thick. results in a solution that is highly alkaline
package and in the product literature.
and may burn or irritate the eyes or skin.
Application
Wear safety glasses or goggles, protective
Preparation Weather conditions play a key roll in successful
clothing, shoes, and gloves to prevent eye
Note: UltraCrete Ultra Stamp is a decorative application. Do not use in extreme temperatures
and skin contact. Do not take internally.
finish material for use over hard, sound and or windy conditions. Put the amount of clean
Avoid breathing dust. This product contains
clean concrete (It will not correct bad concrete). water and resin into the plastic container,
crystalline silica. Prolonged exposure to
Clean area and remove all unsound concrete, proportional with the application desired. Mix
crystalline silica dust is known to cause lung
grease, oil, paint, and any other foreign materials only enough material that can be used within
cancer or delayed lung injury, including
that will inhibit performance. Follow the 30 minutes. Dry times may vary depending on
silicosis. Take measures to eliminate or
procedures given below or referenced in these weather conditions. Note: It is recommended
control dust while handling or planing this
or other applicable industry standards: that a test patch be made on a small section if
product. Wear a respirator approved for
unfamiliar with surface and product and to
ASTM D 4258 - Practice for Surface Cleaning protection against crystalline silica dust.
aquire an accurate timeframe for application.
Concrete for Coating, ASTM D 4259 - Practice Warning: This product contains a chemical
Examine the patch after several days to
for Abrading Concrete and ASTM D 4620 known to the state of California to cause
determine if a good bond has been obtained.
Practice for Acid Etching Concrete. cancer.
Note: It is recommended that a test patch be Application of Texture Mats First Aid: If swallowed, get immediate
made on a small section if unfamiliar with medical attention. Do not induce vomiting
UltraCrete Ultra Stamp can be imprinted or
surface or product. Examine the patch after unless directed to do so by medical personnel.
textured using various designs of Texture Mats.
several days to determine if a good bond has In case of contact, flush eyes or skin
UltraCrete 3936 Ultra Stamp Liquid Release
been obtained. thoroughly for a minimum of 15 minutes
Agent shall be applied evenly to the surface
Before application, saturate the substrate with with clean water and get prompt medical
and the mats prior to imprinting. While the mix
water to a SSD (saturated surface dry) condition. attention. Wash clothing and thoroughly
is still setting, the Texture Mats shall be applied
Very porous concrete surfaces will require clean shoes before reuse.
to the surface.
several applications of water to insure complete Read and understand the MSDS (Material
Clear Coat
saturation. Safety Data Sheet) before using this product.
UltraCrete 965 Siliconized Clear Coat, or
Repair or replace all rusted reinforcing steel
Technical Services
approved equal, shall be applied in accordance
and all spalled, cracked and deteriorated
Color Wheel Paints and Coatings offers and
with the manufacturer鈥檚 recommendations
concrete before applying UltraCrete Ultra
encourages the use of our free technical
immediately after the surface has properly cured.
Stamp.
service. We also advise you to contact us
Design and Color Option
Mixing Equipment regularly for updates to this and other
UltraCrete Ultra Stamp is a white colored technical data. For technical assistance, to
A 陆鈥? drill and a mixing paddle with a 5 gallon
product. It can be colored in a variety of other arrange a consultation with a Sales
pail are sufficient. The 陆鈥? drill must be a slow
colors with the addition of the 3960 Line Representative, or for current technical data,
or variable speed drill to control the shear and
UltraCrete Dry Color Packs. Colors available consult your yellow pages or our web site for
mixing speed.
are those on our UltraCrete color chart. the Color Wheel location nearest you, or call
toll free (800) 749-6810.
All technical advice, recommendations, and services are rendered by Color Wheel gratis. They are based on technical data which Color Wheel believes to be reliable, and are intended for use by persons having skill and knowhow at their own discretion and risk.
Color Wheel Paint Manufacturing Company, Inc. assumes no responsibility for results obtained or damages incurred from their use by purchaser/user in whole or in part. All information is subject to change without notice.
NOTE: Where applicable, and for consistency, technical data and test results contained in this document are based on the pure white base of the particular product line.
LIMITATION OF LIABILITY: COLOR WHEEL MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability, if any, is limited to replacement of the product or refund of the purchase price. LABOR OR COST OF LABOR AND OTHER CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED.
Division 3 / 03500 - Cementitious Decks & Topping 3930.04.2 / PDS / 2
|